Owner's Manual

36 PLASMA MONITOR
Miscellaneous
05. Volume
Mute
(Command
2 :
e)
G
To control volume mute on/off.
Transmission
Data 0 : Volume mute off
(Volume on)
1 : Volume mute on
(Volume off)
[k][e][ ][Set ID][ ][Data][Cr]
Ack
[e][ ][Set ID][ ][OK][Data][x]
03.
Aspect
Ratio
(Command
2 :
c) (Main
Picture
Size)
G
To
adjust
the screen format.
(Main picture format)
You can also
adjust
the screen format in the SCREEN
menu.
Transmission
Data 1 : Normal screen
(4:3)
2 : Wide screen
(16:9)
3 :
Spectacle
4 : Full screen
(Zoom)
6 :
Original
7 : Wide screen
(14:9)
8 : Full
(Option)
[k][c][ ][Set ID][ ][Data][Cr]
Ack
*
Using
the PC
input, you
select either 16:9 or 4:3 screen
aspect
ratio.
[c][ ][Set ID][ ][OK][Data][x]
04. Screen
Mute
(Command
2 :
d)
G
To select screen mute on/off.
Transmission
Data 0 : Screen mute off
(Picture on)
1 : Screen mute on
(Picture off)
[k][d][ ][Set ID][ ][Data][Cr]
Ack
[d][ ][Set ID][ ][OK][Data][x]
06. Volume
Control
(Command
2 :
f)
G
To
adjust
volume.
You can also
adjust
volume with the volume buttons
on the set.
Transmission
Data Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See
page
39.
[k][f][ ][Set ID][ ][Data][Cr]
Ack
[f][ ][Set ID][ ][OK][Data][x]
07.
Contrast
(Command
2 :
g)
G
To
adjust
screen contrast.
You can also
adjust
contrast in the PICTURE menu.
Transmission
Data Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See
page
39.
[k][g][ ][Set ID][ ][Data][Cr]
Ack
[g][ ][Set ID][ ][OK][Data][x]
08.
Brightness (Command
2 :
h)
G
To
adjust
screen
brightness.
You can also
adjust brightness
in the PICTURE menu.
Transmission
Data Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See
page
39.
[k][h][ ][Set ID][ ][Data][Cr]
Ack
[h][ ][Set ID][ ][OK][Data][x]
01. Power
(Command
2 :
a)
G
To control Power On/Off of the set.
Transmission
Data 0 : Power Off 1:PowerOn
[k][a][ ][Set ID][ ][Data][Cr]
Ack
[a][ ][Set ID][ ][OK][Data][x]
G
To show Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Ack
*
In like
manner,
if other functions transmit '0xFF' data
based on this
format,
Acknowledgement
data feed back
presents
status about each function.
[a][ ][Set ID][ ][OK][Data][x]
02.
Input
Select
(Command
2 :
b)
G
To select
input
source for the set.
Transmission
Data 0 :RGB 1 :HDMI
[k][b][ ][Set ID][ ][Data][Cr]
Ack
[b][ ][Set ID][ ][OK][Data][x]