Owner's Manual

42 PLASMA MONITOR
Miscellaneous
T
T
roubleshooting
Checklist
roubleshooting
Checklist
No
output
from one of
the
speakers
?
Adjust
Balance
in the SOUND menu.
(Refer
to
p.14)
Unusual sound
from
inside the set
?
A
change
in ambient
humidity
or
temperature may
result in an unusual noise
at the time of
switching
off or on of the set and does not indicate a fault with
the set.
No
picture
&
No
sound
?
Check whether the set is turned on.
?
Power cord inserted into wall outlet?
?
Plug
another
product's power
cord into the wall outlet where the set's
power
cord was
plugged
in.
No or Poor colour
or Poor
picture
?
Select
Colour
in the PICTURE menu and
press
the VOLUME
(G)
button.
(Refer
to
p.13)
?
Keep
a certain distance between the set and the VCR.
?
Activate
any
function to restore the
brightness
of the
picture.
(If
still
picture
is on the screen for more than 5
minutes,
the screen
gets dark.)
Picture
OK &
No
sound
?
Press the VOLUME
(G)
button.
?
Sound muted? Press MUTE button.
?
Check whether the
speaker
is "on" in the SOUND menu.
Picture
appears slowly,
after
switching
on
?
This is normal as the
image
is muted
during
the
startup process
of the set.
Please contact
your
service
centre,
if the
picture
has not
appeared
after five
minutes.
Horizontal/vertical bars
or
picture shaking
?
Check for local interference such as an electrical
appliance
or
power
tool.