OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
Warning! Safety instructions ENGLISH CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION •• Make sure the power cord is connected securely to the power plug on the TV. •• Install the product where no radio wave occurs. •• There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. •• Do not install the product on places such as unstable shelves or inclined surfaces. Also avoid places where there is vibration or where the product cannot be fully supported.
ENGLISH 5 •• Take care not to touch the ventilation openings when watching the TV for long periods as the ventilation openings may become hot. This does not affect the operation or performance of the product. •• Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. •• Prevent dust collecting on the power plug pins or outlet.
CAUTION Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
Using the button (*Image may vary depending on model) (Depending on model) Basic functions (Key description is given for mainly joystick) ENGLISH You can simply operate the TV functions, using the button. Power On Joystick button and Press it once and release it. When the TV is turned on, joystick button and press it once for few seconds and release it. (However, if the Menu button is one the screen, pressing and holding the joystick button will let you exit the Menu.
Mounting on a table Attaching the TV to a desk (*Image may vary depending on model) 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. (Feature may vary depending on models.) ENGLISH The TV should be attached to a desk so it cannot be pulled in a forward/ backward direction, potentially causing injury or damaging the product. 10 cm 10 cm 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet.
Using the kensington security system (Features may vary depending on models.) ENGLISH •• Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. Connect the Kensington security system cable between the TV and a table. Adjusting the angle of the TV to suit view (Features may vary depending on models.
Mounting on a wall Separate purchase (Wall mounting bracket) 49/55LV64** 49/55LV76** 55UV34** 49/55UV76** 55UV96** 49LU640* Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket.
Connections (notifications) NOTE ENGLISH • When installing the wall mounting bracket, use the adhesive label provided. The adhesive label will protect the opening from accumulating dust and dirt. (Only when the item of the following form is provided) Provided item Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
Satellite dish connection (Only satellite models) Speaker output setup (Depending on model) ENGLISH Connect the TV to a satellite dish to a satellite socket with a satellite RF cable (75 Ω). CI module connection EXTERNAL SPEAKER OUT or STEREO (8 ) (Depending on model) View the encrypted (pay) services in digital TV mode. •• Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
Network setup Other connections Wired network connection Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. ENGLISH (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication.
Remote control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION • In Analogue TV and some countries, some remote control buttons may not work.
(Depending on model) ENGLISH (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Not functional. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Alphabet buttons Enters letters. Accesses the saved programmes list. (Space) Opens an empty space on the screen keyboard. Returns to the previously viewed programme. Adjusts the volume level. Shows the previous history. Shows programme guide.
(Depending on model) ENGLISH (POWER) Turns the TV on or off. Selects Radio, TV and DTV programme. Recalls your preferred subtitle in digital mode. Audio descriptions function will be enabled. Resizes an image. (INPUT) Changes the input source. Number buttons Enters numbers. Accesses the saved programme list. Returns to the previously viewed programme. Adjusts the volume level. Accesses your favourite programme list. Shows programme guide. (MUTE) Mutes all sounds.
Troubleshooting Supported licenses may differ by model. For more information about licenses, visit www.lg.com. The software version can be updated for improvement in performance. Customer needs to ensure the compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and upload revised software version according to the guidance provided by LGE. Cannot control the TV with the remote control. ENGLISH Licenses Manufactured under license from Dolby Laboratories.
•• Electrical circuit humming/panel buzzing: A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product. This generated sound does not affect the performance and reliability of the product. •• Use this information for LV640S series. You can download the SuperSign Software and manual from LG Electronics website. http://partner.lge.com Software : SuperSign W_Lite_Server_vX.X.X_Setup.zip SuperSign C_vX.
CI Module (W x H x D) ENGLISH Environment condition 100.0 mm x 55.0 mm x 5.
HDMI/DVI-DTV supported mode Resolution 720 x 480 720 x 576 1280 x 720 1920 x 1080 1920 x 1080 1 3840 x 21601 4096 x 21601 1 Only UV34**, UV76**, UV96** Vertical Frequency (Hz) 59.94 60.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00 23.976 24.000 29.97 30.00 50.00 59.94 60.00 120 119.88 100 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.
Component port connecting information Component ports on the TV ENGLISH Video output ports on DVD player Audio format Item Info PB PR Y PB PR Y B-Y R-Y Y Cb Cr Pr Bit rate - Sample freq. 8 kHz - 96 kHz Y Pb .mp3 .wav Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2 channels mono, stereo Support PCM channels mono, stereo O Bit rate 64 kbps - 320 kbps 720p / 1080i O Sample freq.
Video codec Extension Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid(except 3 warp-point GMC), H.264/ AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS .avi .mp4 .m4v .mov .3gp .3g2 Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3) Video H.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
LED TV LU64** 12 AAA 14 16 12 14 20 16 20 a X4 (M4 X L16) b X5 (M3 X L10) 43LU64** Depending upon country www.lg.
43/49LV64**, 49LU64** 1 2 3 B BB BB A AA B B A BB A 4 BB AA 5 AA CAUTION Image shown may differ from your TV. When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
CAUTION Image shown may differ from your TV. When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ANTENNA/ CABLE IN HDMI IN HDMI IN/ARC USB IN LU640* USB IN
H/P OUT Satellite IN PCMCIA CARD SLOT OPTICAL DIGITAL AUDIO OUT
COMPONENT IN VIDEO/Y PB VIDEO AV IN PR L/MONO AUDIO R AUDIO VIDEO/Y PB PR L/MONO AUDIO R VIDEO L/MONO AUDIO R
HDMI-DVI IN RGB IN RGB IN HDMI IN VIDEO/Y PB PR L/MONO AUDIO R AUDIO OUT VIDEO/Y PB DVI OUT PR L/MONO AUDIO R AUDIO OUT RGB OUT
NOTE Image shown may vary depending on model.
NOTE Image shown may vary depending on model.
0 1 A 2 E D B G F A 49LU640H-TD B 1107 Power requirement C 701 235 C D 645 E 79.4 F F G 11.42 AC 100-240 V ~ 50 / 60 Hz 11.
0 1 A 2 E D B G C F A 43LU640H-TD B 974 Power requirement 625 C 220 D 587 E 90.8 F 10.3 F G 10.
IR CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP Type of Connector : D-Sub 9-Pin Male 1 5 ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE • RS-232C connection cables are not supplied with the product.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Set ID number. “Real Data Mapping”.
Transmission / Receiving Protocol (Depending on Model) 01. Power (Command: k a) ►► To control Power On/Off of the set. ENGLISH Transmission [k][a][ ][Set ID][ ][Data][Cr] Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99.
03. Screen Mute (Command: k d) 06. Contrast (Command: k g) ►► To select screen mute on/off. ►► To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04.
09. Tint (Command: k j) 12. Remote control lock mode (Command: k m) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu. ►► To lock the front panel controls on the monitor and remote control. ENGLISH Transmission [k][j][ ][Set ID][ ][Data][Cr] Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off Data Red : 00 to Green : 64 01 : Lock on Ack [m][ ][Set ID][ ][OK/NG][Data][x] * Refer to Real data mapping.
14. Colour Temperature (Command: x u) 16. Auto Configure (Command: j u) (Only RGB support model) ►► To adjust colour temperature. You can also adjust Colour Temperature in the PICTURE menu. ►► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Warm: 00 to Cool:64 ENGLISH Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set * Refer to Real data mapping.
18. Tune Command (Command: m a) 20. Key (Command: m c) ►► Select channel to following physical number. ►► To send IR remote key code. ENGLISH Transmission [m][a][ ][Set ID][ ][Data 00][ ][Data 01][ ][Data 02][Cr] Data 00 : High channel data Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Data 01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No.
Input Number Data 0 0 0 Input1 0 0 0 1 Input2 0 0 1 0 Input3 0 0 1 1 Input4 ENGLISH 0 Ack [b][ ][Set ID][ ][OK/NG][Data][x] * Real data mapping 00 : Step 0 A: Step 10 (Set ID 10) F: Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255 9
رموز األشعة تحت الحمراء •ال تتوفر هذه الميزة لجميع الطرازات.
إعداد جهاز التحكم الخارجي الموصل D-Sub :ذكر مزود بـ 9أسنان نوع ّ إعداد RS-232C العربية •قد تختلف الصورة المعروضة عن صورة التلفاز لديك. قم بتوصيل مقبس إدخال ( RS-232Cالمنفذ التسلسلي) بجهاز تحكم خارجي (مثل الكمبيوتر أو نظام للتحكم في الصوت والصورة) وذلك للتحكم الخارجي في وظائف المنتج. قم بتوصيل المنفذ التسلسلي لجهاز التحكم بمقبس RS-232C الموجود في اللوحة الخلفية للمنتج. اسم السن رقم 1 مالحظة •المنتج غير مزود بكبالت توصيل .
القائمة المرجعية لألوامر عمليات تهيئة RS-232C (حسب الطراز) عمليات التكوين سباعية األسالك (كبل RS-232Cالقياسي) الكمبيوتر 3 2 5 6 4 8 7 2 3 5 4 6 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS .01الطاقة 4 5 k g من 00إلى 64 k h من 00إلى 64 .08اللون k i من 00إلى 64 .
بروتوكول اإلرسال /االستقبال ( Power .01الطاقة) (األمر)k a : ◄ للتحكم بتشغيل/إيقاف تشغيل الجهاز. اإلرسال (حسب الطراز) ][k][a][ ][Set ID][ ][Data][Cr العربية اإلرسال []Command1][Command2][ ][Set ID][ ][Data][Cr [ : ]Command 1األمر األول للتحكم بالتلفاز. ( jأو kأو mأو )x [ : ]Command 2األمر الثاني للتحكم بالتلفاز. معرف معرف الجهاز الختيار رقم ّ [ : ]Set IDيمكنك ضبط ّ التلفاز المطلوب من قائمة ( optionالخيارات) .
( Screen Mute .03حجب الشاشة) (األمر)k d : ( Contrast .06التباين) (األمر)k g : ◄ لتحديد تشغيل/إيقاف حجب الشاشة. ◄ لضبط درجة تباين الشاشة. يمكنك أيضاً ضبط درجة التباين في قائمة ( PICTUREصورة).
( Tint .09درجة اللون) (األمر)k j : ◄ لضبط درجة لون الشاشة. يمكنك ً أيضا ضبط درجة اللون من قائمة PICTURE (صورة). العربية اإلرسال ][k][j][ ][Set ID][ ][Data][Cr Dataأحمر (أحمر) 00 :إلى أخضر (أخضر) 64 : * راجع تخطيط البيانات الفعلي. اإلقرار ][j][ ][Set ID][ ][OK/NG][Data][x ( Sharpness .10الحدة) (األمر)k k : ◄ لضبط حدة الشاشة. يمكنك ً أيضا ضبط الحدة من قائمة ( PICTUREصورة).
◄لضبط وضع الصورة وتقليل اهتزازها تلقائيًا .تعمل فقط في وضع (RGBالكمبيوتر). اإلرسال العربية ( Colour Temperature .14درجة حرارة األلوان) (األمر)x u : ◄ لضبط درجة حرارة األلوان .يمكنك ً أيضا ضبط درجة حرارة األلوان من قائمة ( PICTUREصورة). اإلرسال ( Auto Configure .
( Tune Command .18أمر التوليف) (األمر)m a : ◄ ح ّدد القناة للرقم الفعلي التالي. اإلرسال ( Key .20المفتاح)(األمر)m c : ◄ إلرسال رمز مفتاح األشعة تحت الحمراء لوحدة التحكم عن بُعد.
رقم اإلدخال البيانات اإلدخال2 1 0 0 0 اإلدخال3 0 1 0 0 اإلدخال4 1 1 0 0 العربية اإلدخال1 0 0 0 0 اإلقرار ][b][ ][Set ID][ ][OK/NG][Data][x * تخطيط البيانات الفعلي :00الخطوة 0 A الخطوة ( 10معرّف الجهاز )10 :F :10 الخطوة ( 15معرّف الجهاز )15 الخطوة ( 16معرّف الجهاز )16 :64 الخطوة 100 :6E الخطوة 110 :73 :74 الخطوة 115
