Installation Manual

15
ENGLISH
Receive From USB
• Image shown may differ from your TV.
1
Plug USB memory card into the USB port of the TV.
2
Use the button to select the TV Manager option and then press the OK button.
Installation Menu (V 3.0)
Public Display Mode
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
TV Manager
OK
S/W : 02.00.00.01 Micom : 0.00.84
3
Use the button to select the USB and Ez Download and press the OK button.
* Below explains the naming rules for .TTL files.
The supported model line will be in the name of the file but the screen size will be listed as
“xx”.
This allows TVs having the same chassis model number to use the same ‘*.TTL’ file without
regard to the screen size.
ex) The name of ‘*.TTL’ file is ‘xxLP360H-TA00000.TLL’ for 32/42LP360C model.
TV Manager
Ez Download
Receive from USB
Send to USB
Logo Image Download
Diagnostics
OK
Previous
USB
4
Use the button to select the desired *.TTL files name and press the OK button.
Receive from USB (USB Port1)
GlobalClone00001.TLL
OK
Previous
Select file type
Global TLL
Model TLL
5
The TV is changed to Standby mode after a successful download.
If the download failed, the TV will changed to the initial installation screen.