Installation Manual

17
ENGLISH
Logo Image Download
Make a ‘LG_DTV’ folder on the USB flash drive and then copy the splash image file to that folder.
• Image shown may differ from your TV.
1
Connect the USB device to the USB IN jack on the TV.
AV
(RGB)
/DVI IN
1 2
COMPONENT
IN
RGB IN (PC)
SPEAKER
OUT
ANTENNA/
CABLE IN
OPTICAL
AUDIO OUT
AUDIO IN
(COMPONENT/RGB/DVI)
RS-232C IN
(CONTROL & SERVICE)
H/P OUT
IN 3 USB IN
PCMCIA CARD SLOT
2
Use the button to select the TV Manager option and then press the OK button.
Installation Menu (V 3.0)
Public Display Mode
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
TV Manager
OK
S/W : 02.00.00.01 Micom : 0.00.84
3
Use the button to select the USB and Send to USB and press the OK button.
TV Manager
Ez Download
Receive from USB
Send to USB
Logo Image Download
Diagnostics
OK
Previous
USB
4
Use the button to select the desired file name and press the OK button.
Logo Image Download
Image1.jpg
OK
Previous
Image2.jpg
Image3.jpg
NOTE
• Splash Image update function supports only JPEG format file of less than 1 MB filesize.
• Except for JPEG images with progressive encoding.
• We recommend you that splash image resolution match the TV`s panel resolution.
• ‘Max resolution of splash image : Full HD->1920x1080, HD->1360x768.
• ‘Min resolution of splash image : Full HD->64x64, HD->64x64.
• TV keep splash image until you change a new splash image.
• Please do not use the ampersand character(&) and the left angle bracket (<) in the filename to use DZM file on EZ
Download.
• Non-standard photo/image file may not be displayed