Installation Manual

22
ENGLISH
Configuration Setup
• Image shown may differ from your TV.
Installation Menu (V 3.0)
Public Display Mode
TV Manager
Password Change
Set ID Setup
Time Scheduler
Lock Mode
External Speaker
HCEC Setup
Insert Image
Configuration Setup
OK
S/W : 02.00.00.01 Micom : 0.00.84
Number of RCU
Splash Offset Time
USB Auto Playback
15Min Auto Off
Auto Sensing
Forced DVI Audio
Screen Saver Cube
Wake On Lan
Configuration Setup
Photo
Disable
To Set
Off
Yes
Previous
OK
0
◄
Off
►
Yes
(1) Number of RCU
• It is a function to set whether to use Select RCU or not and set number of RCU.
• When Number of RCU is set to ‘0’, this function do not use.
• Number of RCU value range 1~9
• * RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
(2) Splash Offset Time
• Set the splash image display time
• When Splash Offset Time is set to ‘OFF’, TV logo(splash image) do not display.
• The time can be set to between 0 and 10 seconds.
(3) Big UI Display
• When ‘Big UI Display’ is set to ‘Yes’, TV displays enlarged Channel Banner UI.
(4) USB Auto Playback
• When ‘USB Auto Playback’ is set to ‘Movie’, TV finds and plays the USB’s movie files located at the
root(top) directory Movies if USB is plugged in. (Some menu OSDs may prevent this function.)
• When ‘USB Auto Playback’ is set to ‘Photo’, TV finds and plays the USB’s photo files located at the
root(top) directory Photos if USB is plugged in. (Some menu OSDs may prevent this function.)
• If it reaches the last file, it starts the first file again.