Installation Manual

23
ENGLISH
(5) 15Min Auto Off
• When ‘15Min Auto Off’ is set to ‘Enable’, TV will turn off if there is no signal in 15Min.
(6) Auto Sensing
• -If ‘Auto Sensing’ is set to ‘ ', the input is automatically switched when the input signal that you
set to ‘ON’ is received.
• If ‘Auto Sensing’ is set to ‘Disable’, the input is not switched when the input signal is received.
• If SIMPLINK is set to On, HDMI is automatically set to Disable and can not work.
• If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns to the
previous setting.
• If the several inputs are connected by enabling Auto Sensing and the automatic input switch is performed
several times, the input returns to the previous setting only for the last input and does not repeat the
operation for the rest.
• For the AV input connected using the euro scart cable, Auto Sensing does not work for the TV input
because the Auto AV function is enabled.(For other inputs, Auto Sensing works normally.)
(7) Forced DVI Audio
• When Forced DVI Audio is selected, the audio signal from the HDMI port will be transmitted through the
RGB, AV, or Audio In #1 component ports.
• The video signal will be transmitted through HDMI to be displayed on the screen in standard quality.
• For the audio signal, the priority order is the RGB -> AV -> Audio In component ports.
(8) Screen Saver Cube
• When ‘Screen Saver Cube’ is set to ‘No’, TV will do not display LG Screen Cube.
(9) WOL(Wake On Lan)
*Depending upon model
• If Set to “YES”, User can turn on the TV by using LAN network.
• Only Magic Packet is valid.
• If TV get a magic packet that include TV’s mac address, TV will be turned on.
• TV will sustain WOL setting value, although user unplug the TV.
(10) Video Mute
• When ‘Video Mute’ is set to ‘Yes’, for Blank.
(11) Noise Mute
• When ‘Noise Mute’ is set to ‘Yes’, audio mutes when no signal is present.