Installation Manual

28
ENGLISH
HCEC Setup
CEC Mode
IR Decoding
Device ID
StandBy
HTNG HotelMode
HCEC Setup
◄ Default ►
OK
Previous
No
All
All
No
Installation Menu (V 3.0)
Public Display Mode
TV Manager
Password Change
Set ID Setup
Configuration Setup
Time scheduler
Lock Mode
External Speaker
Insert Image
HCEC Setup
OK
S/W : 02.00.00.01 Micom : 0.00.84
1
Use the button to select the HCEC Setup.
(1) HCEC Setup
• When ‘HCEC Setup’ is set to ‘HCEC Mode’, You can adjust ‘IR Decoding’, ‘Device ID’, ‘Stand By’ menu and
SIMPLINK feature automatically changed to the ON state, and the user can not change this status.
(a) IR Decoding
• When ‘IR Decoding’ is set to ‘Yes’, the TV decodes and changes it into a CEC Message and sends it
to Command via the HDMI CEC Line. The default value is No.
(b) Device ID
• Sets the ID of a device(Logical Address) connected to the CEC Line. You can choose between ‘All’
and ‘E’.
• The default value is ‘All’.