Installation Manual

29
ENGLISH
(c) Stand By
• Sets the sending and receiving scenario of the operation about [CEC Op standBy(0x0c)
Command(Device Power)].
• The detailed scenario is described on the table below.
Send Receive
Send Only O X
Receive Only X O
ALL O O
OFF X O
(2) HTNG HotelMode
• If the following options are selected because of the HTNG command:
*Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume, then the value
for the HTNG HotelMode changes automatically to Yes and, even if the HotelMode is set to No, the
above options are still affected.
• If you change it to No, then the values set by the HTNG will be canceled.