Installation Manual

31
ENGLISH
WELCOME VIDEO
(Depending upon model)
Welcome Video
Video Reset
Welcome Video
Confirm
◄
Disable
►
Previous
OK
Installation Menu (V 3.0)
Public Display Settings
TV Manager
Password Change
Set ID Setup
Configuration Setup
Time Scheduler
Lock Mode
HCEC Setup
Insert Image
Welcome Video
OK
S/W : 02.00.00.01 Micom : 0.00.84
• This feature allows you to download videos via USB storage to display on your TV after your TV boots
up and the boot logo appears.
1
Select Welcome Video with the and buttons and then press the OK button.
2
Welcome Video
• You can set to Off, Once or Repeat using the button
3
Video Reset
• Delete downloaded videos and reset the feature back to default.
NOTE
1. Operation
• The video displays after your TV is turned on and the boot logo appears.
• If Welcome Video is enabled and a video is downloaded on the TV, the video plays.
• The time it takes a video to be displayed may differ depending on the decoding time of the video.
• In case of a corrupted or damaged file, the video may abruptly stop without an error displayed.
• The timer features such as Off Timer and Sleep Timer are not available during playback.
• USB Autoplayback starts after the Welcome Video.
• Controls for playing the video are not available. (Pause, stop, fast forward, etc.)
2. Using the keys
• Only eight keys (Vol +, Vol -, Mute, OK, Exit, CH up, CH down and Back) can be used while playing video.
• The OK, Exit, CH up, CH down, or Back key can cancel playing a video.
3. Using RS232C
• Only the following commands work: KE(mute), KF(volume), and MC(data – volume, mute, ch).
4. Downloading
• Videos in any file format that the TV supports can be downloaded and displayed.
• Videos up to 50MB can be downloaded.
• For detailed information about downloading videos, go to TV Manager > Ez Download.
• Please do not use the ampersand character(&) and the left angle bracket (<) in the filename to use DZM
file on EZ Download.