Installation Manual

16
206-4317 Draft A.2
EZ-Manager Wizard (Cont.)
(Continued from previous page)
EZ-Manager Wizard
Processing the Pro:Centric Configuration...
Application files
Maintenance files
–
Updating Configuration File
Warning - Do not remove AC power or the signal cables during these steps
20%
GEM app downloaded
In progress...
Retrieving files from data channel 75
4
2
1
3
Downloading the maintenance files takes several minutes.
Please wait...
Note: If, after completing the search, the TV is unable to fi nd the Pro:Centric data channel (while the
Searching for Pro:Centric Server screen is on display), the wizard will stop and show a Diagnostics
screen that enables you to manually return to the previous screen (to reinitiate the confi guration) or
exit the wizard.
When the Pro:Centric Confi guration is complete, an EZ-Manager Confi guration Complete screen is
displayed, and after 10 seconds, the wizard exits, and the TV turns OFF.
EZ-Manager Wizard
EZ-Manager Configuration Complete
Pro:Centric Application
Maintenance Files
GEM application downloaded
LV570H_Config.tlx
Installed Components
2
1
3
The TV will turn off in 3 second(s).
4
Reboot
Turn Off
Note: With the EZ-Manager Confi guration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select Turn Off or Reboot, respectively, and then press OK on the
Installer Remote.
Manual Pro:Centric Confi guration
1. With the Searching for Pro:Centric Server screen on display, use the Left/Right arrow keys on
the Installer Remote to select Manual Pro:Centric at the bottom right of the screen, and then
press OK.
In the Pro:Centric Manual Confi guration screen (see examples on following page), you will be
able to confi gure the appropriate Pro:Centric settings in the TV. Use the Up/Down arrow keys on
the Installer Remote to navigate between fi elds.
2. In the Pro:Centric Mode fi eld, use the Left/Right arrow keys to select the appropriate Pro:Centric
Application Mode—FLASH, GEM, or Confi guration Only.
(Continued on next page)