LED TV LX341* LX540* www.lg.
i
1 1 2 3 d 4 5 c + d c / b c + d 6 a/ b a
H/P OUT 2 (MHL) IN USB IN 2 A-1 LX341* A B
H/P OUT 2 (MHL) IN 1 2 A-2 LX540*
B LAN IN (MHEG/SERVICE) 1 EXTERNAL SPEAKER OUT OPTICAL DIGITAL AUDIO OUT AV (RGB) RS-232C IN (CONTROL & SERVICE) AUDIO IN (COMPONENT/RGB/DVI) LNB Satellite COMPONENT IN RGB IN (PC) COMPONENT IN GND RIGHT ( AUDIO IN (COMPONENT/RGB/DVI) AUDIO IN (COMPONENT/RGB/DVI) ) LEFT ( ) GND L VIDEO R AUDIO ANTENNA/ CABLE IN
B LAN IN (MHEG/SERVICE) 1 EXTERNAL SPEAKER OUT OPTICAL DIGITAL AUDIO OUT AV (RGB) RS-232C IN (CONTROL & SERVICE) AUDIO IN (COMPONENT/RGB/DVI) LNB Satellite COMPONENT IN RGB IN (PC) ANTENNA/ CABLE IN
3 4 5 1 2 3 4
A F E B D G C 43LX341C-GA 49LX341C-GA 55LX341C-GA 60LX341C-GA A x B x C (mm) 973 x 625 x 193 1106 x 697 x 220 1242 x 774 x 220 1363 x 844 x 294 A x E x F (mm) 973 x 573 x 55.1 1106 x 647 x 55.1 1242 x 724 x 55.1 1363 x 792 x 57.1 D (kg) 12.7 17.6 20.9 29.3 - G 10.2 14.4 17.7 24.
43LX540S-GA 49LX540S-GA 55LX540S-GA 60LX540S-GA A x B x C (mm) 973 x 625 x 193 1106 x 697 x 220 1242 x 774 x 220 1363 x 844 x 294 A x E x F (mm) 973 x 573 x 55.1 1106 x 647 x 55.1 1242 x 724 x 55.1 1363 x 792 x 57.1 D (kg) 12.7 17.6 20.9 29.3 - G 10.2 14.4 17.7 24.
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Safety instructions ENGLISH Please read these safety precautions carefully before using the product.
Des ENGLISH Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Never Disassemble the AC adapter or power cord. This may result in fire or electric shock. CAUTION Install the product where no radio wave occurs.
When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product. We recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV. If you watch TV for a long period of time, this may cause blurred vision. Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet.
ENGLISH Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. When moving the product, make sure you turn the power off first. Then, unplug the power cables, antenna cables and all connecting cables. The TV set or power cord may be damaged, which may create a fire hazard or cause electric shock.
Preparing Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking. The warranty does not cover the product for image sticking. Avoid displaying a fixed image on your television’s screen for a prolonged period. Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.
ENGLISH Separate purchase Lifting and moving the TV Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
Mounting on a table (Image shown may differ from your TV.) (Image shown may differ from your TV.) You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right. 1 Lift and tilt the TV into its upright position on a table. ENGLISH Using the joystick button • Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm Joystick Button 10 cm 10 cm 10 cm 10 cm Basic Functions 2 Connect the power cord to a wall outlet.
Adjusting the angle of the TV to suit view B type) (Depending on model) ENGLISH Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ CAUTION • When adjusting the angle of the product, watch out for your fingers. -- Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.
Securing the TV to a wall (This feature is not available for all models.) Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table. 32LX33** 32/43LX54** 43LX34** VESA (A x B)(mm) 200 x 200 Standard screw M6 Number of screws 4 Model 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first.
CAUTION ENGLISH • Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. • If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorised LG wall mount and contact the local dealer or qualified personnel. • Do not over tighten the screws as this may cause damage to the TV and void your warranty.
How to use Dual Lock™ Connections (notifications) (Only when the item of the following form is provided) (This feature is not available for all models.) 1 After removing the protection paper from the Dual LockTM, stick it to the TV and the set-top box as shown. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device.
Adapter connection Speaker Output Setup (Depending on model) (Depending on model) CAUTION ENGLISH • Please be sure to connect the TV to the AC-DC power adapter before connecting the TV’s power plug to a wall power outlet. CI module connection (Depending on model) View the encrypted (pay) services in digital TV mode. EXTERNAL SPEAKER OUT • Check if the CI module is inserted into the PCMCIA card slot in the right direction.
Remote control Network setup Wired network connection (Depending on model) This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV. ENGLISH (Depending on model) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.
B ENGLISH Adjusts the volume level. Accesses your favourite programme list. Shows programme guide. Mutes all sounds. Scrolls through the saved programmes. Moves to the previous or next screen. A C B D C Teletext buttons ( ) These buttons are used for teletext. Views the information of the current programme and screen. Accesses the main menus. Accesses the Quick menus. Selects menus or options and confirms your input. Navigation buttons (up/down/left/right) Scrolls through menus or options.
Licenses ENGLISH C Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. D The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. C Shows programme guide. Displays and removes hotel interactive menu.
Open source software notice information ENGLISH To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource. lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Software download information ENGLISH • Use this information for LX540S, LX530S series. You can download the SuperSign Software and manual from LG Electronics website. Visit https://www.lgecommercial.com/digital-signage/support/download/supersign for Software & https://www.lgecommercial.com/digital-signage/support/download/supersign for manual. Software : SuperSign W_Lite_Server_vX.X.X_Setup.zip SuperSign C_vX.X.X_Setup.zip SuperSign W_Editor_vX.X.X_Setup.zip SuperSign W_Player_vX.X.X_Setup.
HDMI/DVI-DTV supported mode ENGLISH Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720 x 480 31.469 31.5 59.94 60 720 x 576 31.25 50 1280 x 720 37.5 44.96 45 50 59.94 60 1920 x 1080 28.125 33.75 33.72 56.250 67.50 67.432 27.00 26.973 33.75 33.716 50.00 60.00 59.94 50.00 60.00 59.94 24.00 23.976 30.00 29.976 (Only LX33**, LX34**,LX540S, LX530S) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.468 70.09 720 x 400 31.469 70.08 640 x 480 31.
Supported video formats • File type : mp3 [Bit rate] 32 Kbps - 320 Kbps [Sample freq.] 16 kHz - 48 kHz [Support] MPEG1, MPEG2, Layer2 , Layer3 • File Type : AAC [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] ADIF, ADTS • File Type : M4A [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] MPEG-4 • File Type : WMA [Bit rate] 128 Kbps ~ 320 Kbps [Sample freq.] 8 kHz ~ 48 kHz [Support] WMA7, WMA8, WMA9 Standard • File Type : WMA 10 Pro [Bit rate] ~ 768 Kbps [Channel / Sample freq.
Supported photo formats ENGLISH • Category : 2D (jpeg, jpg, jpe) [Available file type] SOF0: Baseline, SOF1 : Extend Sequential, SOF2 : Progressive [Photo size] Minimum : 64 x 64, Maximum : Normal Type: 15360 (W) x 8640 (H), Progressive Type : 1920 (W) x 1440 (H) • Category : BMP [Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400 • Category : PNG [Available file type] Interlace, Non-Interlace [Photo size] Minimum : 64 x 64, Maximum : Interlace : 1200 x 800, Non-Interlace : 9600 x 6400 • BMP and PNG for
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
IR CODES yy This feature is not available for all models. Function 08 F0 39 91 79 0B 10-19 53 1A (POWER) TV/RAD SUBTITLE AD RATIO INPUT Number Key 0-9 LIST Q.
EXTERNAL CONTROL DEVICE SETUP Type of Connector : D-Sub 9-Pin Male 1 5 ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE • RS-232C connection cables are not supplied with the product.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Set ID number. “Real Data Mapping”.
Transmission / Receiving Protocol (Depending on Model) ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] 01. Power (Command: k a) ►► To control Power On/Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] [Command 1] : First command to control the TV.(j, k, m or x) ►► To Show TV is Power On/Off. [Command 2] : Second command to control the TV.
03. Screen Mute (Command: k d) 07. Brightness (Command: k h) ►► To select screen mute on/off. ►► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][d][ ][Set ID][ ][Data][Cr] 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04.
11. OSD Select (Command: k l) 15. Energy Saving (Command: j q) ►► To select OSD (On Screen Display) on/off when controlling remotely. ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
17. Equalizer (Command : j v) 19. Programme Add/Skip (Command: m b) ►► To adjust equalize. ►► To set skip status for the current Programme. Transmission [j][v][ ][Set ID][ ][Data][Cr] Transmission [m][b][ ][Set ID][ ][Data][Cr] LSB 0 0 0 0 0 0 0 Data 00 : Skip 0 ENGLISH MSB 01 : Add Ack [b][ ][Set ID][ ][OK/NG][Data][x] Data Frequency 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band ... ... ... ... ... ..
22. Input select (Command: x b) (Main Picture Input) * Real data mapping ►► To select input source for main picture.
