Owner's Manual
4
ENGLISH
Communication Parameters
• Baud rate : 9600 bps (UART)
• Data length : 8 bits
• Parity : None
• Stop bit : 1 bit
• Communication code : ASCII code
• Use a crossed (reverse) cable.
Command Reference List
(Depending on Model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power k a 00 to 01
12. Remote Control
Lock Mode
k m 00 to 01
02. Aspect Ratio k c (See p. 6) 13. Balance k t 00 to 64
03. Screen Mute k d (See p. 6)
14. Colour
Temperature
x u 00 to 64
04. Volume Mute k e 00 to 01 15. Energy Saving j q (See p. 7)
05. Volume Control k f 00 to 64
16. Auto
Conguration
j u 01
06. Contrast k g 00 to 64 17. Equalize j v (See p. 8)
07. Brightness k h 00 to 64 18. Tune Command m a (See p. 8)
08. Colour k i 00 to 64
19. Programme
Add/Skip
m b 00 to 01
09. Tint k j 00 to 64 20. Key m c (See p. 8)
10. Sharpness k k 00 to 32
21. Control
Back Light
m g 00 to 64
11. OSD Select k l 00 to 01
22. Input select
(Main)
x b (See p. 9)
NOTE
• During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are not executed and treated as NG.