Installation Manual

7
206-4277
Commercial Mode Overview (Cont.)
Typical Installer Menu
TV Setup Menus
Installer Menu
To create a Master TV Setup, you will need to know how to
access the commercial controller (PTC) Installer Menu and
make changes to the default values as required. If necessary,
familiarize yourself with the Installer Menu and how to make
and save changes. Refer to pages 22 to 31 for information on
accessing the Installer Menu and for detailed descriptions of
the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to
configure a Target TV. The Master TV’s clonable setup menu
features should be configured as part of the Master TV Setup.
If there are features in the Master TV’s setup—channel icons
or labels, digital font options, etc.—that are not set or that are
set incorrectly, those features also will not be set or will be set
incorrectly in the Target TVs. Refer to pages 35 to 38 for
detailed information on cloning requirements and procedures.
External MPI Control
To control the TV using an external MPI control device, you
must use the TV’s MPI port for communication purposes.
Note: These TV models are not equipped with MPI card slots.
FTG Mode
In this mode, the TV’s CPU is congured with an FTG Channel
Map, and the CPU controls and restricts the tuning operation of
the TV based on this FTG Channel Map. The FTG Channel Map
enables the decryption of each Pro:Idiom
®
encrypted channel
and also provides logical channel mapping of physical RF channels
(analog and digital) and Aux inputs. In addition, in these models,
FTG Mode provides the option to select either logical or physical
tuning (see note below) during configuration.
Note: Logical channel mapping of physical RF channels eliminates
dash tuning (for example, physical 19-3 can be mapped to logical
channel 9). Physical channel tuning requires that you include the
dash when direct entering channel numbers.
xxLX560H PTC INSTALLER MENU
CPU-CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.006 CPU V3.00.20.01
PICTURE
AUDIO
INPUT
OPTION
TIME
MY MEDIA
CHANNEL
LOCK