Installation Manual

37
206-4309
Custom Master TV Setup
This section describes how to create a customized Master TV Setup for cloning purposes when
the TV is in Pass-through Mode. All cloning (export and import) processes on the TV are performed
via USB memory device / “.tlx” le. The Master TV Setup may be exported to a Clone (.tlx) file,
which can then be used (i.e., imported) to configure either TVs that are to remain in Pass-through
Mode or TVs that are to be configured for FTG Mode.
Cloning requirements and procedures are described in detail on pages 40 to 46.
Note: You can also use the FTG File Manager to create an FTG Conguration (.tlx) le for
FTG Mode via CPU conguration/cloning purposes, if desired (see pages 47 to 48). However,
it is not possible to customize TV setup menu settings in the FTG File Manager. If you wish to
include customized TV setup menu settings in the TV conguration, in addition to the channel
lineup and Installer Menu settings, perform the Master TV Setup procedure to create a Clone
(.tlx) conguration le.
Before You Begin
• It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel
Search). Under certain conditions, Auto Tuning is disabled if there is an Aux input active.
• A Clone (.tlx) le comprises Installer Menu settings, IP Environment Menu settings (with the
exception of unique TV attributes and settings), and all TV sources’ (analog, digital, AV, HDMI,
etc.) clonable setup menu settings. See also “Clonable TV Setup Menu Features” list below.
• If the “.tlx” le (either a Clone or FTG Conguration le) to be imported on the Target TV(s)
contains an FTG Channel Map, the Target TV(s) will be congured for FTG Mode via CPU,
though as part of the import process, depending on the types of channels included in the Channel
Map, you may have the option to select either logical or physical channel tuning. If you would like
the Target TV(s) to remain in Pass-through Mode, the “.tlx” le should not include an FTG Channel
Map.
Clonable TV Setup Menu Features
Picture
Smart Picture Mode
Picture Mode Settings
Sound
Smart Sound Mode
Sound Mode Settings
Volume Mode
AV Sync Adjustment
Channels
Channel Tuning
Channel Manager
Channel Label
General
Language
Time & Date
− Clock Mode (Auto/Manual)
− Time Zone
Timers (No Signal Power Off)
Standby Light
Accessibility
Pointer Options
Menu Transparency
Closed Captions
Audio Guidance
TV Power Sound
Note: Some menu options vary between analog and digital channels and Aux inputs.
Note: The Quick Settings Menu is initially displayed when you press MENU SETTINGS on the
Installer Remote. Select the All Settings menu icon to access the advanced TV setup menus.
Several advanced settings are duplicated in the Quick Settings Menu.