OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 32SE3D 43SE3D 49SE3D 55SE3D 65SE3D 32SE3KD 43SE3KD 49SE3KD 55SE3KD 65SE3KD www.lg.
ENGLISH TABLE OF CONTENTS SAFETY PRECAUTIONS.................3 -- Precautions In Installing the Product......................3 -- Precautions for using AC Adapter and Electrical Power..................................................................5 -- Precautions For Moving the Product......................7 -- Precautions For Using the Product..........................8 -- Mounting on a Wall..........................................................9 LICENSES.....................................
SAFETY PRECAUTIONS Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. WARNING •• Indoor Use Only. Precautions In Installing the Product WARNING •• Keep away from heat sources like electrical heaters.
ENGLISH •• Do not drop an object on or apply impact to the product. Do not throw any toys or objects on the product screen. -- It can cause injury to human, problem to product and damage the display. •• Do not let the product fall or drop when connecting it with an external device. -- This may cause injury and/or damage to the product. •• When connecting it to a game device, keep a distance of four times the diagonal measurement of the screen from the device.
WARNING •• If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center. -- Otherwise, this may cause a fire or electric shock due to damage to the product. •• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry them before use. -- Otherwise, this may cause a fire or electric shock.
ENGLISH •• If you don’t intend to use the product for a long time, unplug the power cable from the product. -- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire. •• Fix the power cable completely. -- If the power cable is not fixed completely, a fire can break out. •• Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall.
WARNING •• Make sure to turn off the product. -- You may be electrocuted or the product can be damaged. •• Make sure to remove all cables before moving the product. -- You may be electrocuted or the product can be damaged. •• Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
ENGLISH Precautions For Using the Product WARNING •• Do not disassemble, repair or modify the product at your own discretion. -- Fire or electric shock accident can occur. -- Contact the service center for check, calibration or repair. •• When the display is to be left unattended for an extended period of time, unplug it from the wall outlet. •• Keep the product away from water. -- Fire or electric shock accident can occur.
WATER CHEMICALS •• Do not use products using high voltage around the Monitor. (e.g., a bug zapper) -- Monitor may have malfunction as its electrical shock. Mounting on a Wall •• Do NOT install this product by yourself as you may injure yourself or cause damage to product. Please contact service personnel authorised by manufacturer. ENGLISH •• Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one direction only. Too much moisture may cause staining.
ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com.
CAUTION •• Always use genuine components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE •• The accessories provided with your product may vary depending on the model or region. •• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions. •• SuperSign Software & Manual -- Downloading from the LG Electronics website.
ENGLISH Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand kit Screws Diameter 4.0 mm x Pitch 0.
Media Player MP500/ MP700 Screws Diameter 3.0 mm x Pitch 0.5 mm x Length 6mm CD (Owner’s Manual)/ Cards Wi-Fi Dongle kit AN-WF500 NOTE •• Cable holder/Cable tie may not be available in some areas or for some models. •• Optional accessories are available for some models. If necessary, please purchase them separately. •• Before you attach the Media Player, connect the cable to the port. ENGLISH Media Player kit (It may not be supported depending on the model.
ENGLISH Parts and Buttons The image may be different according to the model. Buttons •• INPUT: Changes the input source. •• MENU: Accesses the main menus, or saves your input and exits the menus. •• : Adjust the up and down. •• : Moves left and right. •• AUTO/SET: Displays the current signal and mode. •• /I: Turns the power on or off.
-- For certain models only. -- The image may be different according to the model.
ENGLISH 43/49/55/65SE3* 1 2 3
-- For certain models only. -- The image may be different according to the model. 32SE3D 1 Connect an input signal cable before installing the speakers. 2 Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection.
3 Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker ENGLISH cables.
2 Mount the speakers by using screws as shown below. Make sure the power cable is disconnected before making a connection. 3 Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. NOTE •• Please turn off the power before removing the cable. Connecting or removing the speaker cable while turned on may result in no sound. ENGLISH 43/49/55/65SE3D 1 Connect an input signal cable before installing the speakers.
ENGLISH Using the IR Receiver -- The image may be different according to the model. This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Install the IR receiver towards the front of the set. IR Receiver cable NOTE •• When you see from the back of the set, if the IR receiver cable does not face front, the signal reception range may shorten. •• The IR receiver is made with a magnet.
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Using Kensington Lock (This is not available for all models.) The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the monitor and a table.
ENGLISH Attaching and removing the LG Logo Bracket -- For certain models only. -- The image may be different according to the model. Removing the LG Logo Bracket 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Using a screwdriver, remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor. LG Logo Bracket 2 After removing the screw, remove the LG Logo Bracket.
Attaching the LG Logo Bracket on the right side remove the screw that secures the LG Logo Bracket to the bottom rear of the monitor. 2 After removing the screw, remove the LG Logo Bracket. Attach the LG Logo Bracket with a screw, aligning it with the hole on the right side. ENGLISH 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down.
ENGLISH Installing on a Wall For proper ventilation, allow a clearance of 100 mm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 100 mm 100 mm 100 mm 100 mm 100 mm To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall.
CAUTION NOTE •• The wall mount kit includes the installation guide and all necessary parts. •• The wall mounting bracket is optional. You can obtain additional accessories from your local dealer. •• The length of screws required may differ depending on the wall mount. Be sure to use the correct length. •• For more information, please refer to the guide provided with the wall mount. ENGLISH •• Disconnect the power cord before moving or installing the monitor to avoid risk of electric shock.
ENGLISH REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching and terminals to the labels inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
SETTINGS Accesses the main menus or saves your input and exit menus. S.MENU SuperSign menu key. Navigation Buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK Allows you to move back one step in the user interaction function. EXIT Quit all OSD tasks and applications. Allows you to control various multimedia devices to enjoy multimedia simply by using the remote control through the SimpLink menu. TILE Selects the TILE Mode.
ENGLISH Displaying the Device Name Connected to an Input Port Display which devices are connected to which external input ports. 1 Access the Input list screen and press the red (input label) button on the remote control. 2 You can assign an input label for every input except USB. NOTE •• External inputs supported: HDMI •• Labels available: PC, DTV •• The input labels are displayed on the Input Label screen or at the top left of the screen when you change the external input setting.
You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the Plug and Play* feature. * Plug and Play: a feature that enables a PC to recognize devices attached by the user without device configuration or user intervention when powering up.
NOTE ENGLISH •• For the best image quality, using the monitor with HDMI connection is recommended. •• To comply with the specifications of the product, use a shielded interface cable with ferrite core, such as a D-sub 15-pin cable and DVI-D/HDMI cable. •• If you turn the monitor on when the set is cold, the screen may flicker. This is normal. •• Sometimes red, green, or blue spots may appear on the screen. This is normal. •• Use a High Speed HDMI®/TM cable.
ENGLISH TROUBLESHOOTING No image is displayed. Problem Is the product power cord connected? Does the “Invalid Format” message appear? Does the “No Signal” message appear? Action •• Check if the power cord is correctly plugged into the power outlet. •• The signal from the PC (Graphics card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. •• The signal cable between PC and product is not connected.
After-image appears on the product. ENGLISH Problem Action After-image appears when the product is turned off. •• If you use a fixed image for a long time, the pixels may be damaged. Use the screen-saver function. •• When a dark image is displayed on the screen after an image with high contrast (black and white or gray), this may cause image sticking. This is normal for LCD screen products. The audio function does not work. Problem No sound? Sound is too dull. Sound is too low.
CAUTION Recommended operating conditions 1 Change the background and the character colors using the same time interval. ID: UPM 123 PW: **** ID: UPM 123 PW: **** When changing colors, using complementary colors helps to prevent image sticking. Glass BM CF BM CF BM CF CF OC PI LC PI TFT Layers Glass ITO or MoTi Pixel Layer 2 Change the image using the same time interval. Make sure that the characters or images before changing the image remain in the same location after changing the image.
ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Liquid Crystal Display (LCD) Screen Video signal Maximum resolution 1920 x 1080 @ 60 Hz -- This may not be supported on some OS or graphics card types.
32SE3D Pixel pitch 0.36375 mm (H) x 0.36375 mm (V) Power Rated power AC 100-240 V ~ 50/60 Hz 0.8 A Power consumption Head On Mode: 45 W (Typ.) Sleep Mode: ≤ 0.5 W Off Mode: ≤ 0.5 W 729.4 mm x 428.9 mm x 55.5 mm / 5.2 kg Head + Stand 729.4 mm x 481 mm x 154.2 mm / 6 kg Head + Speaker 729.4 mm x 428.9 mm x 95.7 mm / 5.7 kg Head + Speaker + Stand 729.4 mm x 481 mm x 154.2 mm / 6.5 kg LCD screen Pixel pitch 0.36375 mm (H) x 0.36375 mm (V) Power Rated power AC 100-240 V ~ 50/60 Hz 0.
43SE3D ENGLISH LCD screen Pixel pitch 0.4902 mm (H) X 0.4902 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 0.9 A Power consumption Head On Mode: 55 W (Typ.) Sleep Mode: ≤ 0.5 W Off Mode: ≤ 0.5 W 969.6 mm x 563.9 mm x 38.6 mm / 9.6 kg Head + Stand 969.6 mm x 622.2 mm x 193 mm / 12.1 kg Head + Speaker 969.6 mm x 563.9 mm x 67.9 mm / 10.1 kg Head + Speaker + Stand 969.6 mm x 622.2 mm x 193 mm / 12.6 kg LCD screen Pixel pitch 0.4902 mm (H) X 0.
49SE3D Pixel pitch 0.55926 mm (H) X 0.55926 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 1.0 A Power consumption Head On Mode: 60 W (Typ.) Sleep Mode: ≤ 0.5 W Off Mode: ≤ 0.5 W 1102.2 mm x 638.5 mm x 38.6 mm / 13.9 kg Head + Stand 1102.2 mm x 696.8 mm x 219.6 mm / 17.2 kg Head + Speaker 1102.2 mm x 638.5 mm x 67.9 mm / 14.4 kg Head + Speaker + Stand 1102.2 mm x 696.8 mm x 219.6 mm / 17.7 kg LCD screen Pixel pitch 0.55926 mm (H) X 0.
55SE3D ENGLISH LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 1.1 A Power consumption Head On Mode: 65 W (Typ.) Sleep Mode: ≤ 0.5 W Off Mode: ≤ 0.5 W 1238 mm x 714.9 mm x 38.6 mm / 17.1 kg Head + Stand 1238 mm x 773.4 mm x 219.6 mm / 20.4 kg Head + Speaker 1238 mm x 714.9 mm x 67.9 mm / 17.6 kg Head + Speaker + Stand 1238 mm x 773.4 mm x 219.6 mm / 19.9 kg LCD screen Pixel pitch 0.630 mm (H) x 0.
65SE3D Pixel pitch 0.744 mm (H) x 0.744 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 1.4 A Power consumption Head On Mode: 90 W (Typ.) Sleep Mode: ≤ 0.5 W Off Mode: ≤ 0.5 W 1456.9 mm x 838 mm x 41.1 mm / 27.7 kg Head + Stand 1456.9 mm x 898.1 mm x 293.7 mm / 32.9 kg Head + Speaker 1456.9 mm x 838 mm x 70.4 mm / 28.2 kg Head + Speaker + Stand 1456.9 mm x 898.1 mm x 293.7 mm / 33.4 kg LCD screen Pixel pitch 0.744 mm (H) x 0.744 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 1.
RGB (PC) Support Mode ENGLISH Resolution Horizontal frequency (kHz) Vertical frequency (Hz) 720 x 400 31.468 70.8 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60.0 1280 x 720 44.772 59.855 1280 x 960 60 60 1152 x 864 57.717 59.934 1280 x 1024 63.981 60.02 1920 x 1080 67.5 60 HDMI/ DVI-D (PC) Support mode Resolution Horizontal frequency (kHz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.
HDMI (DTV) Support Mode Vertical frequency (Hz) 480/60p 31.5 60 576/50p 31.25 50 720/50p 37.5 50 720/60p 45 60 1080/50i 28.1 50 1080/60i 33.75 60 1080/50p 56.25 50 1080/60p 67.5 60 NOTE •• Resolutions available for the Input Label option in RGB, HDMI/ DVI-D input modes.
LG Digital Signage (MONITOR SIGNAGE) 32SE3D 43SE3D 49SE3D 55SE3D 65SE3D 32SE3KD 43SE3KD 49SE3KD 55SE3KD 65SE3KD AAA Depending upon country MFL69446187 (Image may vary depending on models) P/No: MFL69446187 (1706-REV00)
English You can download the web manuals for this product at the following websites. (Keyword : SE3D, SE3KD) • World Wide : www.lg.com SuperSign : http://partner.lge.
32SE3D 43SE3D 49SE3D 55SE3D 32SE3KD 43SE3KD 49SE3KD 55SE3KD RS-232C IN Image shown may vary depending on model. All connection cables & devices shown in the picture are not included along with the set.
65SE3D 65SE3KD RS-232C IN Image shown may vary depending on model. All connection cables & devices shown in the picture are not included along with the set.
2 1 2 3 4 Image shown may vary depending on model.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. ►► To adjust treble. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable ►► Adjust EQ of the set.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) 2. Tune to the digital antenna (ATSC) channel 30-3.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. 3) When [Data 00] is 06, 07 00 : Off 01 : On * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.
Make sure to read the Safety Precautions before using the product. The model and serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL ENERGY STAR® is a set of power-saving guidelines issued by the U.S.Environmental Protection Agency (EPA). As an ENERGY STAR® Partner LGE U. S. A., Inc. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Refer to ENERGYSTAR.
