ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
EXTERNAL SPEAKER OUT RS-232C IN (CONTROL & SERVICE) GAME CONTROL / M.P.I.
Kg 43US340C0UD 973 973 623 623 (38.3) (38,3) (24.5) (24,5) 216 (8.5) 216 (8,5) 572 572 (22.5) (22,5) 85.0 (3.3) 85,0 (3,3) 8.1 8,1 8.0 8,0 (17.8) (17,8) (17.
*MFL71710802* (2005-REV00)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 43US340C0UD 75US340C2UD 50US340C0UD 55US340C0UD 65US340C0UD 75US340C0UD 86US340C0UD *MFL71710902* (2104-REV02) www.lg.com Copyright © 2020 LG Electronics Inc. All Rights Reserved.
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.
•• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord. •• The items supplied with your product may vary depending upon the model. •• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. •• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.
ENGLISH Optional Extras Lifting and Moving the TV Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model) When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
•• When transporting the TV by hand, hold the TV as shown in the following illustration. Mounting on a Table •• When transporting the TV, do not expose the TV to jolts or excessive vibration. •• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right. •• When handling the TV, be careful not to damage the protruding buttons. •• Avoid touching the screen at all times, as this may result in damage to the screen.
Using the Kensington Security System (optional) Securing TV to the Wall ENGLISH (Depending upon model) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table. (Depending upon model) •• The Kensington security system is optional.
Mounting on a Wall 10 cm 10 cm •• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model) (4 inches) 10 cm m 10 c 10 cm (Depending upon model) Stand hole 9 ENGLISH An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model.
Connections ENGLISH You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. HDMI Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following.
External Devices ENGLISH Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. •• The external device connections shown may differ slightly from illustrations in a manual. •• Connect external devices to the TV regardless about the order of the TV port. •• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Method of volume control port (Depending upon model) •• Cable Spec. (Depending upon model) ENGLISH Each Up / Down pin is pulled to 3.3 V with CPU GPIO. GND / UP / DOWN Network setup CPU detects transition from 3.3 V to GND level for volume control. Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication.
Using the Button When the TV is turned on, press the button one time. You can adjust the Menu items using the button. ENGLISH You can simply operate the TV functions, using the button. Adjusting the Menu Turns the power off. Changes the input source. Scrolls through the saved channels. Adjusts the volume level. Basic Functions Power On (Press) Power Off 1 (Press and Hold) Menu control (Press 2) Menu selection (Press and Hold 3) 1 All running apps will close.
Using Remote Control ENGLISH The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light.
•• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak. •• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution. •• This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.
ENGLISH •• The TV turns off suddenly. -- Check the power control settings. The power supply may be interrupted. -- Check if the auto-off function is activated on the settings related time. -- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. •• When connecting to the PC (HDMI), no signal is detected. -- Turn the TV off/on using the remote control. -- Reconnect the HDMI cable. -- Restart the PC with the TV on.
Settings (Settings) ( ) [Picture] [Picture Mode Settings] [Picture Mode] Select the picture mode optimized for the viewing environment or the program. •• [Vivid] Heightens contrast, brightness and sharpness to display vivid images. •• [Standard] Displays images in standard levels of contrast, brightness and sharpness. •• [APS] APS (Auto power saving) mode reduces power consumption by dimming control. •• [Cinema] / [Game] Displays the optimum picture for a movie or a game.
Specifications ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only). The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).
HDMI (PC) supported mode HDMI (DTV) supported mode •• Use HDMI IN 1 for PC mode. (Depending upon model) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 350 31.46 70.09 720 x 400 31.46 70.08 640 x 480 31.46 59.94 31.46 59.94 31.50 31.47 60.00 59.94 720 x 576p 31.50 31.25 44.96 60.00 50.00 59.94 1280 x 720p 45.00 60.00 37.50 28.12 50.00 50.00 33.72 59.94 60.00 23.97 640 x 480p 720 x 480p 800 x 600 37.87 60.31 1024 x 768 48.36 60.00 1360 x 768 47.71 60.
Composite, AV supported mode Resolution ENGLISH 720 x 480i 720 x 480p Horizontal Vertical Frequency (kHz) Frequency (Hz) 15.73 59.94 15.75 60.00 31.47 59.94 31.50 60.00 Supported Photo Formats File Format 20 Format Supported Audio Formats File Format .mp3 (Bit rate) 32 Kbps - 320 Kbps (Sample freq.) 16 kHz - 48 kHz (Support) MPEG1, MPEG2 (channels) mono, stereo .wav (Bit rate) (Sample freq.) 8 kHz ~ 96 kHz (Support) PCM (channels) mono, stereo .ogg (Bit rate) 64 Kbps - 320 Kbps (Sample freq.
Supported Video Formats .asf .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 .avi .mp4 .m4v .mov .3gp .3g2 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 Video H.
KEY CODES * This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP ENGLISH * Image shown may differ from your TV. * Cable is not provided. * The connection interface may differ from your TV. RS-232C Setup •• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. •• Connect the serial port of the control device to the RS-232C jack on the product back panel.
USB IN RS-232C with RS-232C Cable DE9 (D-Sub 9pin) Type ENGLISH RS-232C IN (CONTROL & SERVICE) (PC) (TV) SERVICE ONLY •• You need to purchase the RS-232C (DE9, D-Sub 9 pin female-to-female 1 type) to RS-232C cable required for the 3 connection between the PC and the TV, which is specified in the manual. (TV) (PC) •• The connection interface may differ from your TV.
RS-232C configurations 7-Wire Configurations (Standard RS-232C cable) TV PC RXD 2 3 TXD TV RXD 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DSR DTR 4 6 DSR DSR 6 4 DTR DSR 6 4 DTR RTS 7 8 CTS RTS 7 8 CTS CTS 8 7 RTS CTS 8 7 RTS D-Sub 9 D-Sub 9 D-Sub 9 ENGLISH PC 3-Wire Configurations (Not standard) D-Sub 9 Set ID For Set ID number, see “Real data mapping (Hexadecimal: Decimal)”.
Communication Parameters ENGLISH •• Baud rate: 9600 bps (UART) •• Data length: 8 bits •• Parity: None •• Stop bit: 1 bit •• Communication code: ASCII code •• Use a crossed (reverse) cable.
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon Model) ENGLISH Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1): First command to control the TV. (j, k, m or x) (Command 2): Second command to control the TV. ([Set ID]): You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
1 Power (Command: k a) ►►To control power on or off of the set. Transmission ENGLISH (k)(a)( )([Set ID])( )(Data)(Cr) Data 00: [Off] Data 01: [On] Ack (a)( )([Set ID])( )(OK/NG)(Data)(x) Ack (c)( )([Set ID])( )(OK/NG)(Data)(x) * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In DTV/HDMI/Component mode (high-definition), Just Scan is available. * Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially.
9 [Tint] (Command: k j) ►►To adjust volume. You can also adjust volume with the volume buttons on remote control. ►►To adjust the screen tint. You can also adjust color in the picture settings.
12 Remote Control Lock Mode (Command: k m) ►►To lock the front panel controls on the monitor and remote control. ENGLISH Transmission (k)(m)( )([Set ID])( )(Data)(Cr) 14 Bass (Command: k s) (Depending upon model) ►►To adjust bass. You can also adjust Bass in the audio settings. Transmission (k)(s)( )([Set ID])( )(Data)(Cr) Data 00: [Off] Data 01: [On] Data Min: 00 to Max: 64 Ack Ack (m)( )([Set ID])( )(OK/NG)(Data)(x) * If you are not using the remote control, use this mode.
17 [Equalizer] (Command: j v) Transmission (j)(v)( )([Set ID])( )(Data)(Cr) MSB 0 0 0 0 0 0 LSB 0 ►►Select channel to following physical number. Transmission 0 (m)(a)( )([Set ID])( )(Data 00)( )(Data 01) Frequency ( )(Data 02)(Cr) Data 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band ... ... ... ... ... ...
ENGLISH •• Tune Command Examples: 1 Tune to the Analog antenna (PAL) Channel 10. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 2 Tune to the digital antenna (DVB-T) Channel 01. [Set ID] = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Antenna TV = 10 Result = ma 00 00 01 10 3 Tune to the satellite (DVB-S) Channel 1000.
•• Digital Antenna/Cable Data 00 : xx (Don’t care) (Data 01)(Data 02): Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) (Data 03)(Data 04): Minor Channel Number Data 03 : High byte Channel Data Data 04 : Low byte Channel Data Data 05 : Input Source (Digital) - 02 : Antenna TV (DTV) – Use Physical Channel Number - 06 : Cable TV (CADTV) – Use Physical Channel Number - 22 : Antenna TV (DTV) – Don’t Use Physical Channel Number - 26 : Cable
ENGLISH •• Digital Antenna/Satellite Data 00: xx (Don’t care) (Data 01)(Data 02): Major Channel Number Data 01: High byte Channel Data Data 02: Low byte Channel Data - 00 01 ~ 27 0F (Decimal: 1 ~ 9999) (Data 03)(Data 04): Minor/Branch Channel Number (Don’t care in Satellite) Data 03: High byte Channel Data Data 04: Low byte Channel Data Data 05: Input Source (Digital/Satellite for Japan) - 02: Antenna TV (DTV) - 07: BS (Broadcasting Satellite) - 08: CS1 (Communication Satellite 1) - 09: CS2 (Communication
23 Input select (Command: x b) (Main Picture Input) ►►To select input source for main picture.
IR OUT Using Guide ENGLISH Suitable / Not Recommend remote-controller data format Item Suitable Data Format Not Recommend Data Format Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Single: Enable Repeat: Enable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format Single: Enable Repeat: Disable Single: Disable Repeat: Disable IR Receiver specifications Carrier freq
Open Source Software Notice Information Updating Firmware (Depending upon model) You can update the firmware for the product by downloading the latest firmware. 1 Download the latest firmware at partner.lge.com. (Signing up for a membership and log-in required) 2 Create a folder named “LG_DTV” or “lg_dtv” on a USB memory device. 3 Move the downloaded file to the folder that you have created on the USB memory device. 4 Connect the USB memory device to the USB port on your TV.
Regulatory ENGLISH FCC Notice (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. WARNING! Never place a television set in an unstable location.
ENGLISH 41
ENGLISH 42
ENGLISH CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.
