Installation Manual

ENG
ENGLISH
8
INSTALLATION MENU
Limited Mode
- Configure TV function’s limitation. When selected to ‘On’, following sub-menus will be worked by
below.
Setup Menu
- Permit to tune and manage Channels as ‘On’(permitted) or ‘Off’(not permitted).
Channel Change
• Decide to change channel or not by setting ‘Program Change’ as ‘On’(Change Possible) or
‘Off’(Change Impossible) when present source is TV.
- When ‘Channel Change’ is set to Off (Change Impossible)
» Program Key, Numeral Key, List Key, Q.View Key don’t work and entering ‘Channel Menu’ in the
Main Menu OSD is impossible.
» ‘Channel’ item in ‘On Time’ menu will be fixed.
» Entering ‘Channels’ in the ‘Main Menu’ OSD is impossible regardless of ‘Channels’ item.
- When ‘Program Change’ is set to On(Change Possible), ‘Program Key’, ‘Numeric Key’, ‘List Key’,
‘Q.View’ Key, ‘TV/RAD Key’, does work and entering ‘Channel Menu’ in the Main Menu OSD is
possible.
Menu Display
• Function to decide whether work with menu (including relevant menus too) of control key (On –
Enter possible) or not (Off – Enter Impossible).
- Although select Off(Enter impossible), the action that press a Menu button for 5 seconds to
enter ‘Installation Menu’ is available.
- When select On(Enter possible), Menu works.
OSD Display
• Decide to display OSD or not by setting ‘OSD Display’ as On(Display) or Off(Do not Display).
- When ‘OSD Display’ is set to ‘Off’(Do not Display), all OSD is not displayed except some
exception.
- Although select ‘Off’ (Do not Display), the action that press a Menu button for 5 seconds to
enter ‘Installation Menu’ and entering service menu are available. (In-Start, Power-Only, Adjust,
Installation Menu…)
System Provider Mode
• ‘System Provider Mode’ allows access to the menu system from the front panel or remote control
but access is controlled as follows:
- When value is ‘On’, Accessible Items on the menu system, others are not permissible. (Depending
on model)
» Input select screens
» Sleep timer
» Aspect Ratio
» Caption
» Channels (Except for Channel Tuning & Settings and Channel Manager)
» ‘Safety’ / ‘Photo & Video’ / ‘Music’ / ‘Network’ / ‘Bluetooth’ Menu
» Input Manager
- If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘CH+’,
‘CH-’ keys.