LED TV ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
ENGLISH Read Safety and Reference. WARNING : To prevent injury, this apparatus must be securely attached to the desk/wall in accordance with the Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. ADVERTENCIA : Para prevenir daños, este aparato debe ser instalado a la mesa/pared de acuerdo a la guía de Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
M.P.I.
M.P.I. GAME CONTROL / M.P.I.
HDMI IN
1 2 3 4
0 1 2 , , , , , 43UV560H-UA 43UV570H-UA 49UV560H-UA 49UV570H-UA 55UV560H-UA 55UV570H-UA 55UV562H-UD 55UV572H-UD : : 974 (38.3) 974 (38,3) 625 (24.6) 625 (24,6) 303 (11.9) 303 (11,9) 571 (22.4) 571 (22,4) 79.4 (3.1) 79,4 (3,1) 12.45 (27.4) 12,45 (27,4) 9.2 (20.2) 9,2 1.05 A / 105 W 1,05 A / 105 W (20,2) 1,107 (43.5) 1 107 (43,5) 702 (27.6) 702 (27,6) 303 (11.9) 303 (11,9) 645 (25.3) 645 (25,3) 79.4 (3.1) 79,4 (3,1) 14.55 (32.0) 14,55 (32,0) 11.3 (24.9) 11,3 (24,9) 1.
*MFL69843834*
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 43UV560H 43UV570H 49UV560H 49UV570H *MFL69885542* 55UV560H 55UV570H 55UV562H 55UV572H 65UV560H 65UV570H www.lg.com P/NO : MFL69885542 (1912-REV05) Copyright © 2017 LG Electronics Inc. All Rights Reserved.
Warning! Important Safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. the manufacturer. ••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
••Outdoor Antenna Grounding (Can differ by country): If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.
ENGLISH ••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV. ••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen. ••DISCONNECTING THE DEVICE FROM THE MAIN POWER The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible. ••Make sure the power cord is connected securely to the power plug on the TV.
Lifting and Moving the TV Using the Button When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. ••It is recommended to move the TV in the box or packing material that the TV originally came in. ••Before moving or lifting the TV, disconnect the power cord and all cables. You can operate the TV functions, using the button. ••When holding the TV, the screen should face away from you to avoid damage.
Mounting on a Table Attaching the TV to a desk (Depending upon model) 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (4 inches) (minimum) space from the wall for proper ventilation. (Depending upon model) If mounting the TV on a table, make sure it is installed according to the method outlined in ‘Attaching the TV to a desk’. The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product.
Using the kensington security system (optional) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. ••The Kensington security system is optional. You can obtain additional accessories from your local dealer.
••Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. ••When connecting via a wired LAN, it is recommended to use a CAT 7 cable. A B ••Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. ••When using the wall mount, it is recommended that you apply a piece of tape over the Stand holes to prevent dust and bugs from entering the holes.
Remote Control A (Some buttons and services may not be provided depending upon models or regions.) The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover.
Settings To select Picture Mode B B Displays and removes Pro:Centric Application. ENGLISH Shows information on the current program through Pro:Centric Application. Displays the program event according to time scheduler of Pro:Centric Application. Navigation button (up / down / left / right) Scrolls through menus or options. Selects menus or options and confirms your input. (back) Returns to the previous screen. Accesses the main menu. Clears all on-screen displays and returns to TV viewing.
To set additional picture options • • Picture • Picture Mode Settings • Picture Options Adjusts detailed setting for images. ••Noise Reduction Eliminates noise in the picture. ••MPEG Noise Reduction Eliminates noise generated while creating digital picture signals. ••Black Level Adjusts the brightness and contrast of the screen to suit the black level. ••Real Cinema Optimizes the screen for movie viewing.
Open Source Software Notice Information To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
-- Electrical circuit humming/panel buzzing A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product. Specifications Product specifications may be changed without prior notice due to upgrade of product functions.
4096 x 2160p 53.95 54.00 56.25 61.43 67.50 112.50 134.86 135.00 23.98 24.00 25.00 29.97 30.00 50.00 59.94 60.00 Supported Photo Formats File Format Format .jpeg, .jpg, .jpe JPEG .png PNG .bmp BMP Resolution Minimum: 64 x 64, Maximum: Normal Type: 15,360 (W) x 8,640 (H), Progressive Type: 1,920 (W) x 1,440 (H) Minimum: 64 x 64, Maximum: 5,760 (W) x 5,760 (H) Minimum: 64 x 64, Maximum: 1,920 (W) x 1,080 (H) ENGLISH Supported Audio Formats File Format .mp3 .wav .ogg .wma .
Regulatory FCC NOTICE FCC Radio Frequency Interference Requirements (for UNII devices) [For having wireless function (WLAN, Bluetooth,...)] This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the radiator and your body.
ENGLISH RSS-247 Requirement WARNING! (For Canada) [For product having the wireless function using 5 GHz frequency bands] (1) the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (2) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
Key CODES This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP (Image shown may differ from your TV.) ••Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. ••Please be advised that not all models support this type of connectivity. ••Cable is not provided.
Set ID For Set ID number, see “Real Data Mapping”. 1 2 3 4 Press to access the main menus. Press the Navigation buttons to scroll to General Set ID and press Press the Navigation buttons to scroll to SET ID and press Scroll left or right to select a set ID number and select (back), 1-99. 5 When you are finished, press . * (Depending upon model) Customer Computer 1 5 6 9 RS-232C (Serial port) , . The adjustment range is Pin name 3.
Communication Parameters Stop bit : 1 bit Communication code : ASCII code Use a crossed (reverse) cable. Baud rate : 9600 bps (UART) Data length : 8 bits Parity : None Command reference list (Depending upon model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (page 22) 03. Screen Mute k d (page 22) 13. Balance 04. Volume Mute k e k COMMAND1 COMMAND2 11. OSD k Select 12.
Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] [Set ID] : : [DATA] : [Cr] [ ] : : Second command to control the TV. You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
••Commands may work differently depending upon model and signal. 01. Power (Command: k a) ••To control Power *On or Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ••To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. ENGLISH 02.
06. Contrast (Command: k g) ••To adjust screen contrast. You can also adjust contrast in the Picture menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] 11. OSD Select (Command: k l) ••To select OSD (On Screen Display) on/off when controlling remotely. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Data 00 : OSD off Ack [g][ ][Set ID][ ][OK/NG][Data][x] Ack [l][ ][Set ID][ ][OK/NG][Data][x] 07. Brightness (Command: k h) ••To adjust screen brightness.
15. Equalizer (Command : j v) ••Adjust EQ of the set. Transmission [j][v][ ][Set ID][ ][Data][Cr] MSB 17. Control Backlight, Control Panel Light (Command: m g) * For LCD TV / LED TV ••To control the backlight.
19. 3D (Command: x t) (only 3D models) (Depending upon model) ••To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data 00][ ] [Data 01] [ ][Data 02][ ][Data 03][Cr] * (Depending upon model) Data Structure [Data 00] [Data 01] [Data 02] [Data 03] 20. Extended 3D(Command: x v) (only 3D models) (Depending upon model) ••To change 3D option for TV.
IR OUT Using Guide (Depending upon model) Suitable / Not Recommend remote-controller data format Item Suitable Data Format Not Recommend Data Format Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Single : Enable Repeat : Enable Single : Enable Repeat : Disable Single : Disable Repeat : Disable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format IR Receiver specifi
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name LG Model 43UV560H-UA, 43UV570H-UA, 49UV560H-UA, 49UV570H-UA, 55UV560H-UA, 55UV570H-UA, 55UV562H-UD, 55UV572H-UD, 65UV560H-UB, 65UV570H-UB Responsible LG Electronics Inc. Party Address 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL 201-266-2534 LG Customer Information Center For inquires or comments, visit www.lg.
