Owner's Manual

GB-18
EXTERNAL EQUIPMENT SETUP
EXTERNAL EQUIPMENT SETUP
Connecting with a Euro Scart cable
➊
Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the
TV.
➋
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
➌
Select AV1 input source using the INPUT button on the remote control.
➍
If connected to AV2 Euro scart socket, select AV2 input source.
NOTE
Any Euro Scart cable used must be signal shielded.
Scart Output
Main Input AV1 (SCART1 Output) AV2 (SCART2 Output)
Freesat ( DTV)
Mute
Freesat ( DTV)
Non-Freesat ( DTV)
Mute
Non-Freesat ( DTV)
Digital Antenna ( DTV)
Mute
Digital Antenna ( DTV)
Analogue Antenna ( TV)
Mute
(Analogue Antenna ( TV) if
the TV mode you last watched
is Analogue Antenna mode.)
Analogue Antenna ( TV)
AV1(SCART1) AV1
AV2(SCART2) AV2
Component Mute
RGB Mute
AV3(CVBS Side) AV3
HDMI1
Mute
HDMI2 Mute
HDMI3(Side) Mute
Connecting with a RCA cable
➊
Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack
colours (Video = yellow, Audio Left = white, and Audio Right = red)
➋
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the
VCR owner’s manual.)
➌
Select AV3 input source using the INPUT button on the remote control.
NOTE
If you have a mono VCR, connect the audio cable from the VCR to the
AUDIO L/MONO jack of the TV.
►
►
➊
➊