-0 LCD TV PLASMA TV OWNER'S MANUAL LCD TV MODELS PLASMA TV MODELS 32LG30 37LG30 42LG30 42LGX 47 LGX 32LG60 37LG60 42LG60 47LG60 S2LG60 37LGS0 42LGS0 47LGS0 S2LGS0 42PG25 50PG25 47LG90 32LG20 Please 50PG60 60PG60 32LG70 42LG70 47LG70 S2LG70 SOPG70 60PG70 rea before operating reference. :tel number the label attached this information and serial number of the set. on the back cover and quote to your dealer when you require service.
WARNING / CAUTION WARNING / CAUTION To prevent WARNING / CAUTION fire or shock this product hazards, do not expose to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLEPARTS INSIDE. REFERTO Class B digital QUALIFIED SERVICEPERSONNEL. This equipment device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 0 Read these instructions. Protect the power cord from being walked on Keep these instructions. or pinched Heed all warnings. receptacles, and the point where they exit from the apparatus. particularly at plugs, convenience Follow all instructions. O Do not use this apparatus near water. Only use attachments/accessories the manufacturer. specified by Clean only with dry cloth.
SAFETY INSTRUCTIONS Never touch this apparatus or antenna a thunder or lighting storm. during O WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV 0 When mounting with a TV on the wall, make sure wet hands. Do not install not to install the TV by the hanging power and near flammable signal cables on the back of the TV.
@ ANTENNAS Outdoor antenna If an outdoor precautions should head @ grounding antenna is installed, below. An outdoor not be located power follow in the vicinity a bookcase. light or lines or circuits to provide system is grounded some protection surges and built-up Section against voltage static charges. 810 of the National supporting with If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center.
CONTENTS WARNING / CAUTION SAFETY INSTRUCTIONS ............................ A .......................... 1 Channel Setup - Auto Scan (Auto Tuning) ........................... 56 - Add / Delete Channel (Manual Tuning) ...... 57 FEATURE OF THIS TV ............................... 6 Accessories ...................................................... 7 Front Panel Information ..................................... 8 Back Panel Information .................................... Stand Instruction ......
Preset Sound Settings (Sound Mode) .............. 89 Troubleshooting ............................................. Maintenance ................................................. 118 120 Sound Setting Adjustment - User Mode ........... 90 Product Specifications ................................... 121 Clear Voice ..................................................... 91 Balance .......................................................... 92 Programming the Remote Control ..................
FEATURE OF THIS TV _ This feature is not available for all models. SRS(O) is a trademark of SRSLabs, Inc. I_ DIGITAL TruSurround XT technology is incorporated under license from SRSLabs, Inc. IHX Manufactured DOLBY I "Dolby under license from Dolby Laboratories. "and the double-D symbol are trademarks of Dolby Laboratories.
PREPARATION ACCESSORIES Ensure that the following accessories dealer where you purchased The accessories included are included with your TV. If an accessory is missing, please contact the the TV. may differ from the images below. _D rT1 _D © z Owner's Manual CD Manual Power Cord Remote Control, Batteries * Wipe spots on the exterior only with the polishing cloth.
PREPARATION FRONTPANELINFORMATION ,,,IImage shown may differ from your TV. ""_NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). -O _o m Plasma TV Models _o Remote Control © z Sensor POWER Button Power/Standby Illuminates Illuminates INPUT Button MENU Button ENTER Button Indicator red in standby mode. blue when the TV is switched VOLUME CHANNEL (-, +) Buttons (V,A)Buttons on.
LCDTVModels 32LG20, 32/37/42LG30, 37/42/47/52LG50 _o m _o CHANNEL ( ^, v) Buttons © z Intelligent Sensor (Except 32LG20, 32/37/42LG30) Adjusts picture conditions according Power/Standby Indicator to the surrounding llluminates red in standby llluminates blue when the set is switched on. VOLUME (+,-) Buttons mode. (Can be adjusted using Power the OPTION __ Indicator Button in Button menu. _ p.
PREPARATION BACK PANELINFORMATION ,,,IImage shown may differ from your TV. Plasma TV Models "O _o _o i O z @ @ HDMI/DVI @ IN, HDMI IN Digital Connection. Supports HD video support 480i. and Digital audio. @ Analog or HDMI to AUDIO I/8" (RGB/DVI) headphone jack for analog PC audio input. For a wired remote control. RS-232C IN (CONTROL & SERVICE) PORT Used by third party devices. @ ANTENNA/CABLE IN Connect over-the air signals to this jack. Connect cable signals to this jack.
LCD TV Models "O _o l,,'rl _o © z 32LG20,32/37/42LG30 37/42/47/52LGSO, 32LGTO _iiiiiiiiiiiiiiiiii_!i!i_!ii!i 11
PREPARATION ""_Image shown may differ from your TV.
STAND INSTRUCTION ,,,IImage shown may differ from your TV. Plasma TV models -0 DETACHMENT INSTALLATION (Oniy 42PG25) Carefully cushioned place the TV screen side down surface to protect the screen on a from O _o © z damage. O Loose the bolts from TV. Assemble the TV as shown. 42PG25 O m Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. O _o Fix the 4 bolts securely back of the TV.
PREPARATION 32/37/42/47/52LG60,42/47LGX ""_Image shown may differ from your TV. INSTALLATION (Only 32/37/42LG60,42LGX) _o I'I"1 _o O z 0 Carefully cushioned place the TV screen side down on a surface to protect the screen from damage. Assemble the parts of the STAND with COVER BASE of the TV. 32LG60 BODY 37LG60 42LC60, 42LCX STAND STAND BODY COVER BASE (_) STAND COVER BASE Assemble the TV as shown. Fix the 4 bolts securely back of the TV.
DETACHMENT O Carefully cushioned PROTECTION COVER place the TV screen side down on a surface to protect the screen from After removing the stand, install the included tection cover over the hole for the stand. pro- damage. © Z Loose the bolts from TV. Detach the stand from TV. After removing the protection protection paper from the cover, adhere it to the TV as shown. / \\ I lS
PREPARATION 32LG20,32/37/42LG30,37/42/47/S2LGS0, 32/42/47/52LG70,47LGg0 ,,,IImage shown may differ from your TV. INSTALLATION (Only 32LG20, DETACHMENT 32/37/42LG30, O O 37/42LG50, 32/42LG70) Carefully cushioned Carefully place the TV screen side down on a cush- place the TV screen side down on a surface to protect the screen from damage. ioned surface to protect the screen from damage. O z s/s e \_\4'\:_'\__--.,Ji ....... ssemble the parts of the STAND with COVER BASE of the TV.
VESA WALL MOUNTING Install your wall mount on a solid wall perpendicular contact to the floor. When attaching to other building materials, please your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal We recommend LG recommends that you use an LG brand wall mount when mounting that wall mounting be performed by a qualified injury. -O _o the TV to a wall. professional m installer.
PREPARATION CABLE MANAGEMENT ,,,IImage shown may differ from your TV. "O Plasma TV Models _o m Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. _o © z 0 Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. CABLE HOLDER How to remove the CABLE MANAGEMENT 42PG25 First, press the cable management. Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
LCD TV Models 32LG20, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70, 47LG90 O onnect the cables as necessary. To connect additional equipment, EXTERNAL _: _iiiiil O EQUIPMENT i_ ii ¸¸ _ _:-Ti 32/37/42/47/52LG60, -O _o m O see the Align the hole with the tab on the CABLE MANAGEMENT CLIP. Turn the CABLE MANAGEMENT shown. SETUP section. CLIP as _o © z Note: This cable management clip can be broken by excessive pressure.
PREPARATION DESKTOP PEDESTALINSTALLATION ,,,IImage shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. -0 _o l'rl 4 inches _o 4 inches 4 inches 4 inches © z SWIVELSTAND After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position. •,,......._ ..........
SECURING THE TV TO THE WALL TO PREVENTFALLING WHEN THE TV IS USED ON A STAND ""_You should purchase necessary components to prevent TV from falling off of the stand. ""_Image shown may differ from your TV. m We recommend Additionally, potentially Caution: that you set up the TV close to a wall so it cannot fall over if pushed backwards.
PREPARATION To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna l-rl (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust the antenna direction if needed. © z Multi-family Dwellings/Apartments Wall (Connect Antenna to wall antenna socket) ................................
EXTERNAL EQUIPMENT SETUP ,l_To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ""_Image shown may differ from your TV. HD RECEIVERSETUP This TV can receive digital you do receive digital Component over-the-air/digital signals from a digital cable signals without set-top box or other an external digital external digital set-top box. However, if device. Connection m x 1.
EXTERNALEQUIPMENT SETUP Plasma TV, 32LG20, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70, 'O1_! m X m z m JC) C m z m C 32/37/42/47/52LG60, 24 42/47LGX 47LG90
HDMI Connection 1. How to connect m X O onnect the digital set-top box to HDMI/DVI 2, 3, or 4 jack on the TV. IN1, m z O No separate audio connection is necessary. HDMI supports both audio and video. m _D C 2. How to use m z 01_ Turn on the digital set-top box. (Refer to the owner's manual for the digital 01_ Select the HDMI1, HDMI2, HDMIS, set-top box.) or HDMI4 source on the TV using the INPUT button control. input m C on the remote HDMI-DTV 26.97 2ZOO 33.71 33.75 6Z432 6Z50 23.
EXTERNALEQUIPMENT SETUP 32LG20, 32/37/42LG30, 37/42/47/52LG50, m X m z m JC) C m z m C 32/37/42/47/52LG60,42/47LGX 26 32LG70 Plasma TV, 42/47/52LG70, 47LG90
DVI to HDMI Connection 1. How to connect m x O 2LG20, 32/37/42LG30, - Connect the DVl output 32/37/42/47/52LG60, - Connect O Connect 37/42/47/52LG50, of the digital set-top 42/47/52LG70, the DVl output 32LG70, Plasma TV box to the HDMI/DVl 42/47LGX, to the AUDIO 1,2, or 3 jack on the TV. _o z 47LG90 of the digital set-top box to the HDMI/DVl the PC audio output IN (RGB/DVl) jack on IN 1,2, 3, or 4 jack on the TV. XD ci the TV. z 2. How to use Turn on the digital set-top box.
EXTERNALEQUIPMENT SETUP 32LG20, 32/37/42LG30, 37/42/47/52LG50, 32LG70 m X --t m z m C m z --t m --t C -0 32/37/42/47/52LG60,42/47LGX 28 Plasma TV, 42/47/52LG70, 47LG90
DVD SETUP Component Connection 1. How to connect O Connect the video outputs COMPONENT (Y, PB, PR) of the DVD to the IN VIDE01 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). x m z m O Connect the audio outputs of the DVD to the COMPONENT IN AUDIO1 jacks on the TV. XD c m z 2. How to use m c Turn on the DVD player, insert a DVD. Select the Component 1 input source on theTVusing the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP Plasma TV, 32LG20, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70, m X --t m _o z m C "O m z --t m --t C -O 32/37/42/47/B2LG60,42/47LGX 3O 47LG90
S-Video Connection (Except 32/37/42/47/52LG60, I. How to connect 42/47LGX) m x m _o O onnect S-VIDEO the S-VIDEO output input on the TV. of the DVD to the z m O onnect the audio outputs input jacks on the TV. of the DVD to the AUDIO X:) c m z 2. How to use m Turn on the DVD player, insert a DVD. c Select the AVI input source on the TV using the INPUT button on the remote control. Refer to the DVD player's manual for operating -O instructions.
EXTERNALEQUIPMENT SETUP HDMI Connection 32LG20, 32/37/42LG30, 37/42/47/52LG50, 32LG70 1. How to connect m x O onnect the HDMI output of the DVD to the HDMI/DVI IN1,2, 3 or 4 jack on the TV. e No separate audio connection is necessary. HDMI supports both audio and video. m z m X:) c 2. How to use m z m c .i. Select the HDMI1. HDMI2. HDMI3. or HDMI4 input source on the TV using the INPUT button on the remote control.
VCR SETUP To avoid picture noise (interference), Use the ISM feature in the Option of time (Plasma TV models only). leave an adequate between the VCR and TV. menu to avoid having a fixed image remain on the screen for a long period If the 4:3 picture may remain visible on the screen. This phenomenon Antenna distance format is used; the fixed images on the sides of the screen is common to all TVs and is not covered by warranty.
EXTERNALEQUIPMENT SETUP Composite (RCA) Connection Plasma TV, 32LG20, 32/37/42LG30, 37/42/47/52LGS0, 32/42/47/S2LGTO, 47LG90 1. How to connect m x m _o O Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) z m _D c m z 2. How to use Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) Select the AV 1 input source on the TV using the INPUT button on the remote control.
S-Video Connection (Except 32/37/42/47/52LG60, 42/47LGX) I. How to connect m x O onnect S-VIDEO the S-VIDEO output input on the TV. of the VCR to the m _D z O onnect the audio outputs input jacks on the TV. of the VCR to the AUDIO m X_ c 2. How to use m z Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner's manual.) Select the AV 1 input source on the TV using the INPUT button on the remote control.
EXTERNALEQUIPMENT SETUP OTHERA/V SOURCESETUP Camcorder 1. How to connect m x m _o z 0 Connect between the Video Game Set AUDIO/VIDEO TV and external jacks equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) m X:) c "0 2. How to use m z m c "0 01_ Select the AV2 input source on the TV using the INPUT button on the remote control. 01_ If connected to AV IN 1 input, select the AV 1 input source on the TV.
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. VGA (D-Sub 15 pin) Connection Plasma TV, 32LG20, 32137142LG30, 37142147152LG50, 32142147152LG70, 47LG90 32137/42/47/52LG60,42/47LGX I'I"I x -I m _o z m c -0 m z -I m -I c -0 I. How to connect O Connect the VGA output of the PC to the RGB (P C) jack on the TV. O Connect the PC audio output to the AUDIO (RGB/DVI) jack on theTV. 2.
EXTERNALEQUIPMENT SETUP DVI to HDMI Connection 1. How to connect m x O 2LG20, - Connect 32/37/42LG30, 37/42/47/52LG50, the DVI output 32/37/42/47/52LG60, z - Connect X:) c O z 2. How to use Connect of the PC to the HDMI/DVI 42/47/52LG70, the DVI output 32LG70, 42/47LGX, IN to the AUDIO 1,2, or 3 jack on the TV. 47LG90 of the PC to the HDMI/DVI the PC audio output Plasma TV IN (RGB/DVl) 1,2, 3, or 4 jack on the TV. jack on the TV. Turn on the PC and the TV.
32LG20, 32/37/42LG30, 37/42/47/52LG50, 32LG70 Plasma TV, 42/47/52LG70, 47LG90 r'rl X m z m I0 C m z m C "0 32/37/42/47/52LG60,42/47LGX 39
EXTERNALEQUIPMENT SETUP Supported Display Specifications (RGB-PC, HDMbPC) m X m z For 32LG20, 32/37/42LG30 For37/42/47/S2LGSO, m 32/37/42/47/S2LG60, 32/42/47/52LG70,42/47LGX, _D 47LG90 C m z 31.469 70.08 31.468 70.09 31.469 70.08 31.469 70.08 31.469 59.94 31.469 37.500 59.94 75.00 37.879 60.31 3Z861 72.80 48.363 60.00 4Z776 59.87 35.156 37.879 46.875 48.077 56.25 60.31 75.00 72.18 4Z720 59.799 48.363 56.476 60.023 60.00 70.06 75.02 47.776 59.87 63.981 79.976 60.
m X ...q I"1"1 z For 42/50PG25, S0/60PG60, S0/60PG70 1"'- I"1"1 ,0 C I"1"1 z 31.468 70.09 31.469 70.08 31.469 3Z500 59.94 75.00 ;7861 72.80 35.156 37.879 46.875 48.077 56.25 60.31 75.00 72.18 48.363 56.476 60.023 60.00 70.06 75.02 4Z776 59.87 63.981 79.976 60.02 75.025 4Z712 60.015 75.00 60.00 66.587 59.934 ...
EXTERNALEQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The Position, Phase, and Size can also be adjusted. m x m _o z m X:) c m z m Only for 32LG20, c 32/37/42LG30 "0 Select PICTURE. Select Screen (RGB-PC). Select Resolution. Select the desired resolution.
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, not correct, try using the manual settings or a different if the image is still resolution or refresh rate on the PC. r'_ x m z m c m z m c Select PICTURE. Select Screen (RGB-PC). • If the position correct, • If picture after Auto Select Auto config.. of the image is still not try Auto adjustment can adjust Phase. needs to adjustment the again.
EXTERNALEQUIPMENT SETUP Adjustment If the picture for screen Position, is not clear after auto adjustment Size, and Phase and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. m x m z m _D c m z m c Select PICTURE. _ Position: ture Select Screen (RGB-PC). to left/right Size, or Phase. is to adjust pic- and up/down as you prefer.
Screen Reset (Reset to original factory values) Returns Position, This feature Size, and Phase to the default factory settings. operates only in RGB-PC mode. m x m _o z m c m z m c -0 Select PICTURE. Select Screen (RGB-PC). Select Reset. Select Yes.
EXTERNALEQUIPMENT SETUP USB CONNECTION (Except 32LG20, 32/37/42LG30) i e) or @ m x m _o z m O c m z m c -O 1. How to connect Connect the USB device to the USB IN jack on the side of TV. 2. How to use After connecting tion. (_ p.
AUDIO OUT CONNECTION Send the TV's audio to external Analog audio equipment (Except 32/37/42/47/52LG60, via the Audio Output port. 42/47LGX) 1. How to connect r'_ x O Connect audio outputs to the TV's AUDIO OUT jacks. m z m O Set the "TV Speaker option - Off" in the AUDIO menu. (_ p.93). See the external audio equipment instruction manual for operation. c m z Digital m c 1.
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed off, depending Q.MENU _h I z sensor on the TV. equipment on or __ on the mode. Select the desired quick menu source. _ p.51 MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu.
THUMBSTICK (Up/Down/Left Right/ENTER) Navigate the on-screen menus and adjust the system settings to your preference. RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected When you toggle AV MODE to TV. this button, the SIMPLINK menu appears at the screen. _ p.62-65 N -r" z It helps you select and set images and sounds. _ p.
WATCHING TV / CHANNEL CONTROL TURNING ON THE TV @ First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the (b/l, INPUT, CH (AT button on the TV or press the POWER, INPUT, CH(^ (0~9) button on the remote control. @ or ^ v ) or v ), Number Select the viewing source by using the INPUT button on the remote control. 01_ This TV is programmed to remember which power state it was last set to, even if the power cord is out.
QUICK MENU / FAVORITECHANNEL SETUP Your TV's OSD (On Screen Display) Q.Menu may differ slightly (Quick Menu) is a menu of features Aspect Ratio: which users might use frequently. Selects your desired picture format. Power Saving (Plasma TV Only): Adjusts screen brightness to reduce the power consumption of the TV. Backlight (LCD TV Only): Adjust the brightness of LCD panel to control the brightness of the screen.
WATCHING TV / CHANNEL CONTROL INITIAL SETTING This Function guides the user to easily set the essential chasing the TV. If will be displayed vated from the user menus. 0_Default selection is "Home". home environment. 01_ "In-store" We recommend Mode is only intended 0_"In-store" Mode is an optimal image quality "Local setting and operates "TruMotion Dimming Demo setting (For 47LG90)" the TV for the first the TV to "Home" mode for the best picture Customers Demo at stores.
Step3. Option setting Select OSD Language Setting Audio Language Setting. Select your desired language. or -r" z < N "1> z z r_l Step4. Auto Tuning N © Z © Start Auto Tuning.
WATCHING TV / CHANNEL CONTROL ON-SCREENMENUSSELECTION Your TV°s OSD (On Screen Display) All models may differ from that shown in this manual. (Except 32LG20.32/37/42LG30) CHANNEL _Auto _ Move ,_,_o, PICTURE _, Enter Tuning Manual Q slightly _ i Aspect Ratio Tuning _ Channel Edit Picture Mode _) AUDIO _ Enter I Auto + M.... E.
Only for 32LG20, 32/37/42LG30 "1z < N I > z z fT1 N © Z T © For USA For Canada Display each menu. Select a menu item. Enter to the pop up menu. Return to TV viewing.
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Auto Scan (Auto Automatically channel list. Tuning) finds all channels available through Run Auto Tuning again after any Antenna/Cable antenna connection or cable inputs, and stores them in memory on the changes. z < N -r" > Z Z r_l N © Z Select CHANNEL. © Select Auto Tuning. 01_ A password is required to gain access to Auto Tuning menu if the Lock System is turned on. Select Yes. Run Auto tuning. Return to the previous menu.
Add/Delete If selecting Channel (Manual DTV or CADTV input Tuning) signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. N -r" z c_ < N -r" > Z Z fT1 N 0 Z Select CHANNEL. 0 Select Manual Tuning. 01_ A password is required Select DTV, TV, CADTV, or CATV. to gain access to Manual Tuning menu if the Lock System is turned on. Select channel you want to add or delete. Select Add or Delete. Return to the previous menu.
WATCHING TV / CHANNEL CONTROL CHANNELSETUP Channel A custom Editing list can be created List are displayed by toggling each channel on or offwith in black and the channels deleted Once a channel is highlighted right corner of the screen. you can add or delete ENTER button. from the Custom the channel The channels List are displayed by referring in the Custom in gray. to the small window at the top- N -r" z < N -r > z z fT1 N © Z (_ Add/Delete © Select CHANNEL. Select Channel Edit.
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Select the desired input source. You can also select the desired input N -r z menu source in the INPUT (Except 52LG20, 52/57/42LG50). 52LG20, 32/37/42LG50, 37/42/47/52LG50, 32LG70 < Antenna i'[ Cob,e 1"1 AVl].[ AV2[.[ Component1 [.[Component2j t HDMI3 Ho_,_]. ] HO_,_] . I_C] N -r > z z fT1 Plasma TV, 42/47/52LG70, 47LG90 N © Z Cob,e i'i AVl].[ AV2[.[ Component1 [.[Component2j Antenna].
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. N -r" z 32LG20, < N -r" > Z Z 32/37/42LG30, 32/37/42/47/52LG60, 37/42/47/52LG50, Plasma TV, 42/47/52LG70, 32LG70 47LG90 With using OPTION menu 42/47LGX With using INPUT button fT1 N 0 Z Select OPTION. Select the source. Select Input Select the label. _m 0 Label. Select the source. Return to the previous menu. Select the label. Return to TV viewing. Return to the previous menu.
AV MODE You can select the optimal images and sounds. All models (Except 50/60PG60, 50/60PG70) ÷ T Only for 50/60PG60, -r" z 50/60PG70 ÷ < N I > z z N © z Press the AV MODE button repeatedly to select the desired source. © 0_If you select "Cinema in AV mode, Cinema both for "PICTURE Mode" Mode" and "AUDIO / HT_Z Cinema" will be selected menu - Picture menu Sound respectively. 01_ If you select "Off" in AV mode, the "Picture Mode" and "Sound Mode" return to previous selected value.
WATCHING TV / CHANNEL CONTROL C,_ImPLInK This function The TV might operates only with devices with the not function This allows you to control properly _._ImPLInK and play other AV devices connected settings. To start using SlMPLINK, turn it on in the user menus. -r" z < N -r" > Z Z fT1 Select OPTION. N 0 Z _m Select SIMPLINK. 0 Select On or Off. Return to the previous menu. Return to TV viewing. 62 logo.
SIMPLINK Functions Direct Play: out additional _Select Disc AV device: playback: 01_ Power off _Switch Sync After connecting control Enables you to select one of the AV devices connected Control all devices: audio-out: Power AV devices to the TV, you can directly the devices and play media with- settings. connected AV devices by pressing the ^ When you power offthe TV, all connected v to TV. < > , ENTER, I_, II, I L _I_I and I_I_ buttons. devices are turned off.
USB * Except 32LG20, 32/37/42LG30 ENTRY MODES When you connect a USB device, this screen is displayed In USB device, you can not add a new folder Connect the USB device to the USB or delete automatically. the existing folder. IN y jacks on the side of TV. _ It doesn't support This TV supports When C removing Select the USB USB device. Do Select PHOTO LIST or MUSIC USB HDD JPG and MP3. the Eject USB device menu before removing LIST Select USB Precautions Eject.
PHOTOLIST You can view .JPG files from The On Screen Display Supported photo USB storage on your model devices. may be slightly different. file: *.JPG You can play JPG files only. Only baseline scan is supported amongJPG. c Do Screen Components Select USB. ] d_ Moves to upper level file 0' Preview: Display thumbnail/folder Select PHOTO .......... LIST.
USB Photo Selection and Popup Menu Fr_eSpa(_ 150MB C _'* Navigate _ PopUp Menu CH Move Page _AV_ Mark Exit $ When you select a file (not folder), this PopUp menu is displayed. t__Vie_. Display the selected item. _, Mark All: Mark all photos on the screen. _ Unmark _ Delete: ,:,Navigate _)PopUpMenu CH MovePage FAY Mark Exit All: Deselect all marked photos. Delete the selected photo item. _ Cancel: Close the pop-up menu. Select the target folder or drive. Use the CH photo page.
Full Screen Menu You can change the Photo screen mode. List view so that it fills the screen. More operations are available in full c ,_ Navigate (_ PopUp Menu CH Move Page Mark Exit Z !ii!!iiii, i_i_ ,:_ Navigate (_ PopUp Menu CH Move Page _A_!I Mark Exit The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. _UsetheCH _ _ Select the target folder or drive. Select the desired photos. Show the Popup menu. Select View.
USB Select the Sideshow, BGM, Delete, Option, or Hide. (Rotate), m Use v < > button to select and control the menu on the full_sized screenl C oo _,, Sideshow: Selected photos are displayed during slide show. If no photo is selected, all photos rent folder are displayed the in the cur- during slide show. _ Set the time interval of the slide show in Option. _ A slide show continues After for a maximum of 4 hours. 4 hours, the slide show will end and go to TV mode or external input mode.
MUSIC LIST You can use the Music This TV cannot List menu to play MPS files form play back copy-protected The On Screen Display on your model a USB storage device. files. may be slightly different. Supported music file: *.MPS Bit rate range 40Kbps - S20Kbps • Sampling rate (Sampling Frequency) MPEG1 : 52000, 44100, 48000Hz c MPEG2 : 16000, 24000, 22050Hz Do MPEG2.5 : 16 - 48KHz Screen Components Select MUSIC Select USB. O G LIST.
USB Music Selection Up to 6 music titles and Popup Menu are listed per page. _,_,Play (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current er will be played. If you go to a different and C _::_ Navigate (_ PopUp Menu CH Move Page Mark Exit the ENTER button, the folder current music in playback will stop.
The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time. c When music is playing, _ A damaged or corrupted is displayed in front of the music play time. music file that does not play Gisplays 00:00 Music files with copy-protection will not play. Press ENTER. button •. or RETURN as the play time. to stop the screen saver.
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio. "O N C _o m N © Z _o © Select PICTURE. _f_You can also adjust Aspect the Q-Menu. Select Aspect Ratio. Select the desired picture format. Return to the previous menu. Return to TV viewing.
Set by program Zoom 1 Selects the proper picture proportion to match the source'simage. Choose Zoom 1 when you want to view the pic- (4:3"* ture without bottom 4:3) any alteration. portions However, the top and of the picture will be cropped. m v.. ..................... m _u (16:9--_ 16:9) Zoom 2 Choose Zoom 2 when you want the picture to be altered, both The picture alteration vertically taking extended and cropped. a halfway trade off between and screen coverage.
PICTURECONTROL PRESETPICTURE SETTINGS Picture Mode - Preset There are factory presets for picture setting manually, or use the Intelligent settings available in the user menus. You can use a preset, change each Sensor. 57/42/47/52LG50, 52LG20, 50/60PG60, 52/57/42/47/52LG60, 52/57/42LG50, 50/60PG70 52/42/47/52LG70, 42/50PG25 42/47LGX, "O 47LG90 N C _o r_l 0_When selecting Select PICTURE. N © Z _o © Select Picture Mode.
Color Tone - Preset Choose one of three automatic color adjustments. cool to see less intense colors with more blue. Set to warm to enhance hotter colors such as red, or set to "O N C m N O Z O Select PICTURE. Select Advanced Select Color Select Cool, Medium, Control. Temperature. or Warm. Return to the previous menu. Return to TV viewing.
PICTURECONTROL MANUAL PICTUREADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference LCD TV only: This feature is disable 50/60PG60, only: This feature 50/60PG70 in "Picture and viewing situations. Mode-Intelligent is disabled in "Picture "O N C m N O Z O Select PICTURE. Select Picture Select Vivid, Mode. Standard, Cinema, Sport, or Game. Select Backlight (Only LCD TV), Contrast, Brightness, Sharpness, Color, or Tint. Make appropriate adjustments.
Picture Mode - Expert Control By segmenting fit, offering categories, the optimal Expert1 picture and Expert2 quality provide more categories which users can set as they see for users. "O N C m N O Z Select PICTURE. O Select Picture Mode. Select Expert1 or Expert2. Select Expert Control. Select your desired menu option. Make appropriate adjustments. Return to the previous menu. Return to TV viewing.
PICTURECONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Fresh Color: Adjusts Noise Reduction: Gamma: Color "Picture Optimizes the contrast the color of the reflection Removes interference High gamma values display Gamut (Only for 47LG90): Mode-Vivid, automatically according automatically up to the point whitish to the brightness to reproduce images and low gamma values display high contrast Select the range of colors that can be expressed.This c r_ © z © Select PICTURE.
ADVANCED CONTROL- BLACK (DARKNESS) LEVEL Adjusting the contrast This feature is disabled and the brightness of the screen using the black level of the screen. in DTV and RGB-PC mode. "O N C m N © Z Select PICTURE. © 01_ Low: The reflection darker. Select Advanced Control. 01_ High: The reflection of the screen gets of the screen gets brighter. 01_ Auto: Select Black Level. Realizing the black level of the screen and set it to High or Low automatically. Select Low or High.
PICTURECONTROL ADVANCED CONTROL- EYECARE-LCDTVOnly Dims extremely This feature bright is disabled pictures. in "Picture Mode-Vivid, -O c _o m © z _o Select PICTURE. © Select Advanced Select Eye Control. Care. Select On or Off. Return to the previous menu. Return to TV viewing. 80 Cinema".
ADVANCED CONTROL - REALCINEMA / FILM MODE Set up the TV for the best picture When you operate adjust 24 fps video from appearance Real Cinema/Film Plasma TV, 32LG20, Mode (3:2 movies. Pull-Down Mode or Cinema Correction Mode), the TV will movies to 30 fps video for display. 32/37/42LG30 This feature operates only in TV (Analog and HDMI 1080i mode.
PICTURECONTROL ADVANCED CONTROLTRUMOTIONOn 37/42/47/52LG60, 42/47/52LG70,42/47LGX,47LG90 TruMotion provides even better quality for movies than 3:2 Pull-Down conversions. TruMotion means the panel supports faster frame rates that normal panels which makes for smoother motion in video. TruMotion LCD models support 120Hz instead of 60Hz.
LOCAL DIMMING Only47LG90 After analyzing contrast the signal of the input video by areas of the screen, it adjusts the backlight ratio. This feature is disabled in "Picture Mode-Cinema, Select PICTURE. to improve the Game". Select O n or Off. -O N Select Local Return to the previous menu. Dimming. C _o m N O Z Return to TV viewing. _o O LOCALDIMMING DEMO Only47LG90 Use this feature to see the difference Local Dimming makes. Select PICTURE.
PICTURECONTROL PICTURE RESET Settings of the selected picture modes return "O N C m N O Z O Select PICTURE. Select Reset. Initialize the adjusted value. Return to TV viewing. 84 to the default factory settings.
POWER INDICATOR- LeDTVOnly Only for 32/37/42/47/52LG60, 42/47LGX "O N C _D m N © Z _D © Select OPTION. 0_Startup Select Power Indicator. starting ume. Sound: Srartup Sound, Standby Power Light or Demo Mode. off the sound of the TV or set the vol- 01_ Standby Select Light, You can turn Light: brightness You can set the of the LED on the front side of the TV during power standby. 01_ Power Light: You can set the the LED on the front side of the TV to be turned Select your desired options.
PICTURECONTROL IMAGESTICKING MINIMIZATION (ISM) METHOD- Plasma rv Only A frozen still picture from a PC/video image. You can use Orbiter game displayed to help prevent on the screen for prolonged image sticking. The other periods two functions can result in a ghost are for removing a ghost image. "O N C m Select OPTION. N O Z O Normal: If image problem, Normal. Select ISM Method. Orbiter: ghost Orbiter Return to the previous menu. is never may help a - set to prevent images.
POWERSAVING PICTURE MODE Plasma TVOnly It reduces the plasma display's power consumption. The default factory setting complies level to be viewed at home. with the Energy You can increase the brightness screen by adjusting the Power ofyour Star requirements Saving and is adjusted to the comfortable level or by setting the Picture Mode. c _D r_ © z Select OPTION. _D © Select Power Saving. Select Level 0, Level I, Level 2, Level 3, or Level 4. Return to the previous menu.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER(AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. 0 C z Select AUDIO. z C 1-11 Select Auto Volume. N 0 z .-I 0 Select On or Off. Return to the previous menu. Return to TV viewing.
PRESETSOUND SETTINGS (SOUND MODE) Sound Mode sound lets you options Standard, enjoy the best sound based on the program Music, Cinema, without any special adjustment as the TV sets the appropriate content. Sport, and Game are preset for optimum sound quality at the factory and are not adjustable. 0 c Z _o z c Select AUDIO. l'rl Select Sound Mode. f_l_ You can also adjust Sound the Q. Menu. Select Standard, Cinema, Sport, Mode in N 0 Z .-I 0 Music, or Game.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT- USERMODE Adjust the sound to suit your taste and room situations. Select AUDIO. Make appropriate Select Sound Mode. Return to the previous menu. O c Z _o adjustments. Select Standard, Cinema, Music, Sport, Return to TV viewing. or Game. z c Select Treble or Bass. l'rl N 0 Z .-I 0 SRS TRUSURROUND XT Select AUDIO. Select SRS TruSurround Select On or Off. XT SRS TruSurround any multi-channel Return to the previous menu.
CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. 0 c Z Select AUDIO. Select Clear Voice. z c Select 0 n or Off. l'rl N 0 Z .-I Return to the previous menu. 0_If you select TruSurround "Clear Voice-On': SRS XT feature will not 0 work. Return to TV viewing. 0_0_ You can also adjust Clear Q-Menu.
SOUND & LANGUAGE CONTROL BALANCE Adjust 0 c Z the left/right sound of speaker to suit your taste and room situations. Select AUDIO. _o z Select Balance. c l'rl N 0 Z .-I 0 Make appropriate Return to the previous menu. Return to TV viewing. 92 adjustments.
TV SPEAKERSONIOFF SETUP Turn the TV speakers off if using external audio equipment. 0 c Z _o Select AUDIO. z c Select TV Speaker. l'rl Select 0 n or Off. N 0 Z .-I 0 Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return 0 c Z Select AUDIO. z c Select Reset. l'rl N 0 Z .-I Initialize the adjusted value. 0 Return to TV viewing. 94 to the default factory settings.
STEREO/SAPBROADCASTSETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Plasma TV LCD TV 0 c Z _o z Analog TV Digital TV c l'rl Select SAP. Select Mono, Stereo, Select Multi Audio. N 0 Z .-I 0 or SAP. Select other languages. Return to TV viewing. Return to TV viewing.
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided This feature operates only in DTV/CADTV 0 c Z _o Select OPTION. z c l'rl N 0 Z .-I Select Language. Select Audio. 0 Select your desired language: English, Spanish, or French Return to the previous menu. Return to TV viewing. 96 mode. by the broadcasting station.
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. 0 c Z Select OPTION. z c Select Language. l'rl N 0 Z .-I Select Menu. 0 Select your desired language. From this point on, the on-screen menus will be shown in the selected language. Return to the previous menu. Return to TV viewing.
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Caption tioning Broadcasting must be provided information to help people with hearing if provided and is usually the program's digital System Captions on a program. dialog. Caption/Text, and analog channels on the Antenna/Cable. which was last set when you turned loss watch TV. Select a caption Analog caption if provided displays information by the broadcaster, This TV is programmed the power off.
Digital Choose Other Broadcasting the language System Captions you want the DTV/CADTV Languages can be chosen for digital This function in only available when Caption Captions to appear in. sources only if they are included on the program. Mode is set On. iiiiiMi/i!iiiiiiiiMi!lliii//i!iiiii _i_ii!_iii_iiiiii!iiiiiiiiiiiiiiiiiiiiii_i_i!i!ii_iii_iiiiYii!iii_ii_iiiiii_i:_:i!iiiiiii!!iiiii!_i_iiiiii!i!i!_ ¸iii! 0 c z t:3 Select OPTION. Select Caption. z c Select 0 n.
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV This function O c Z _o captions in only available that appear when Caption on your Mode is set On. Select OPTION. 01_ Size: Select Caption 01_ Font: Select a typeface 0_Text Color: Select Digital 01_ Bg (Background) background color. Option. for the text. a color for the Color: Select a 01_ Bg (Background) Opacity: the opacity for the background 0 Select Custom. 0101_ Edge Type: 0101_ Edge Color: edges.
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically The digital channel signal Set the clock manually from a digital includes if the current channel information signal. for the current time is set incorrectly time provided by the broadcasting station. by the auto clock function. Select TIME. m Select Clock. m z Select Auto. Select your viewing area time zone. • U.S.A: Eastern, Central, Pacific, Alaska, or Hawaii.
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. Select TIME. Select Clock. m m Select Manual. z Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option. Return to the previous menu. Return to TV viewing.
AUTO ON/OFF TIME SETTING This function The Off Time operates only if the current function overrides The TV must be in standby time has been set. the On Time mode for the On If you do not press any button within automatically mode. revert to standby function Time if they are both set to the same time. to work. 2 hours after the TV turns on with the On 01_ To cancel On/Off Select TIME. Time Time function, function, the TV will select Off.
TIME SETTING SLEEPTIMER SETTING The Sleep Timer turns Note that this setting the TV off at the preset time. is cleared when the TV is turned off. Select TIME. Select Sleep m Timer. Select Off, 1 O, 2 O, 3 O, 6 O, 9 O, 120, 180, or 240 minutes. m z Return to the previous menu. Return to TV viewing. 104 ,I,_You can also adjust Sleep the Q-Menu.
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. Select TIME. Select Auto Sleep. Select 0 n or Off. m m Return to the previous menu. z Return to TV viewing.
PARENTALCONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. this function, the following It is also possible to block all program viewing for a time period.
Lock System Enables or disables the blocking scheme you set up previously. Select LOCK. Input the password. Select Lock System. _o m z Select 0 n or Off. Return to the previous menu. 01_ When you select 0 n, the Lock System is enable. N © z _o © _o Return to TV viewing.
PARENTALCONTROL / RATINGS Set Password Change the password by inputting a new password twice. i¸I¸I ¸I¸pli ¸Hiii _i_iiiiiiii!iiiHii!iiiiiiii_iiii_i!iii!iiiii!iiiii1iii!ji_iiiIiiiiiiiii_!_iiiiiiiiii!ii _iiiii!ii_i{ii_:_iiiH_iii!iiiii_ii_ii!iiiii_i_iiiiiiiIIIi_:_ii_iiiiiiIiiIiiii_iiii Select LOCK. Input the password. Select Set password. m z Choose any 4 digits for your new password. N 0 z 0 As soon as the 4 digits the same 4 digits on the Confirm. Return to the previous menu.
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children (_ _ Block/Unblock _, Move CH Move Page Previous to watch. :_TO_N* Exit Select LOCK. Input the password. Select Block Channel. m z Select a channel to block or unblock. N 0 z Block or unblock a channel. 0 Return to the previous menu. z Return to TV viewing.
PARENTALCONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. Select LOCK. 01_ G (General audience) Input the password.
TV Rating Children Prevents children - For USA only from watching rating does not apply to other certain children's TV programs. ences in the TV Rating - sub menu, your TV programs, Unless you block children can view those according certain to the ratings limit set. The children TV programs intended for mature audi- programs. Se,ect LOC.. Input the password. _o Select TV Rating-Children. m z 01_ Age (applies to TV-Y, TV-Y7) Select Age or Fantasy Violence.
PARENTALCONTROL / RATINGS TV Rating General - ForUSAonly Based on the ratings, blocks certain TV programs that you and your family do not want to view. Select LOCK. Input the password. Select TV Rating-General. _D m z ,i_Age (applies N O z Select Age, Dialogue, Sex or Violence. Language, to TV-G,TV-PG,TV-14,TV- MA). ,l_Dialogue-sexual dialogue (applies to language (applies to TV-PG,TV- 14). _D ,l_Language-adult O Select block options. TV-PG, TV-14, TV-MA).
TV Rating English - For CANADA Selecting !\i,__ canadian _ english language only rating system. Select LOCK. 01_ E (Exempt) Input the password. 01_ C (Children) 01_ C8+ (Children eight years and older) 01_ G (General programming, Select TV Rating-English. suitable for all audiences) 0101_ PG (Parental Guidance) Select E, C, C8+, G, PG, 1 4+, 0101_ 14+ (Viewers 14 years and older) 1 8+, or Blocking 0101_ 18+ (Adult Off. 0101_ Blocking Return to the previous menu.
PARENTALCONTROL / RATINGS TV Rating French - ForCANADA Selecting canadian french language only rating system. Select LOCK. 0,_E (Exempt) Input the password. 0,_G (General) 01_ 8ans+ (General-Not convenient for lit- tle children) Select TV Rating-French. 01_13ans+ (Not convenient t"t3 z 01_16ans+ (Not convenient Select E, G, 8ans+, 1 3ans+, 1 6ans+, 1 8ans+, or Blocking 114 (This programs is only adults) Return to the previous menu. Return to TV viewing. z c_ off.
DOWNLOADABLE RATING This function may become available in the future and will be available This function operates only when TV has received Regions only for digital channels. Rating data. Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. _ MENU Select LOCK. m z Input the password. N O z Select Downloadable Rating. O Select desired Downloadable Rating option. Select desired option z c_ and block it.
PARENTALCONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. iii!iii!i_iii_ii_iiiiiiiiiiiiiiiiiiiiiiiiiiili !_:!_:!_iHi_i_!_i_i_i_i_i_iii_i_ i_ii_ii_i_,i_ii_!:_iiiiiiiiiiiiiiiiiii!ii!: 32LG20, 32/37/42LG30, 37/42/47/52LG50, 32LG70 Select LOCK. Input the password. _D Select Input Block. m z O z Select input source. _D O Select On or Off. _D z Return to the previous menu. Return to TV viewing.
KEY LOCK The TV can be set up so that it can only be used with the remote This feature can be used to prevent This TV is programmed to remember unauthorized which option control. viewing by locking out the front panel controls. it was last set to even if you turn the TV off. Select OPTION. Select Key Lock 0_In Key Lock 'On', if the TV is turned off, press the dD/ I, INPUT, CH (AT Select O n or Off. ^ v ) button on the TV or POWER, INPUT, CH ^ v or NUMBER buttons on the remote control.
APPENDIX TROUBLESHOOTING mml Check to see if there is any object between the product causing obstruction. and the remote control Ensure you are pointing the remote control Ensure that the batteries are installed with correct Ensure that the correct remote operating polarity directly at the TV. (+ to +, - to -). mode is set: TV, VCR etc. Install new batteries. Is the sleep timer set? Check the power control Check whether settings. the product is turned Try another channel.
mm_ Press the VOL or VOLUME button. mini Sound muted? Press MUTE button. mini Try another channel. The problem mini Are the audio cables installed may be with the broadcast. properly? mini Adjust Balance in menu option. mmff A change in ambient when the product humidity is turned or temperature may result in an unusual noise on or off and does not indicate a fault with the product. mini Check HDMI cable over version 1.3. mini Check USB cable over version 2.0. m_Use normal MP3 file.
APPENDIX MAINTENANCE Early malfunctions enjoy your Caution: Careful and regular cleaning Be sure to turn the power off and unplug the power Cleaning O can be prevented. can extend the amount of time you can new TV. cord before you begin any cleaning. the Screen Here's a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
PRODUCT SPECIFICATIONS Dimensions With stand (Width x Height x Depth) Without Weight With stand Without stand Dimensions stand 31.5 x 23.7 x 8.9 inches 36.2 x 26,8 x l1.5 inches 801.8 x 604.2 x 22Z3 mm 919.6 x 682,3 x 293.8 mm 1032,8x 742.3 x 293.8 mm 31.5 x 21.4 x 3.1 inches 36.2 x 24,0 x 3.5 inches 40.6 x 26.3 x 3.6 inches 801.8 x 544.1 x 79.0 mm 919.6 x 610.3 x 89.0 mm 1032.8x 670.1 x 92.0 mm 29,5 pounds / 13,4 kg 41.4 pounds / 18.8 kg 52.0 pounds ,' 23.6 kg 26.2 pounds/ 35.
APPENDIX Dimensions With stand (Width x Height x Depth) Weight Dimensions Without stand With stand Without stand 31.7 x 24.6 x 13.l inches 36.5 x 2Z8 x 14.7 inches 805.6 x 626.0 x 333.0mm 929.0 x 706.9 x 374.7 mm 103Z8 x 796.4 x 379.5 mm 31.7 x 23.1 x 3.7 inches 36.5 x26.1 x 3.8 inches 40.8 x 29.4 x 3.1 inches 805,6 x 58Z4 x 96.2 mm 929,0 x 665,0 x 98,7 rnrn 103Z8 x 747,0x 80.8 mm 31.7 pounds / 14.4 kg 46.7 pounds ,' 21.2 kg 53.1 pounds ,' 24.1 kg 26.8 pounds/ 39.9 pounds ,' 18.
Dimensions 41.1 x 28.9 x 12.1 inches With stand 1044.4 (Width x Height x Depth) Without stand x 735.4 x 308.0 Dimensions (Width x Height x Depth) Weight 1235.6 x 849.3 41.1 x 26.7 x 3.1 inches 1044.4 x 680.6 Weight 48.6 x 33.4 x 14.3 inches mm x 79.6 mm 61.7 pounds / 28.0 kg 96.3 Without 55.1 pounds / 25.0 kg 8Z5 pounds / 39.7 stand With stand 48.6 x 33.4 x 14.3 inches 1235.6 x 849.3 x 364.1 Without stand pounds / 43.7 kg 1455.0 x 985.0 x 414.0 mm 5Z3 x 36.4 x 3.3 inches x 79.
PROGRAMMING THE REMOTE CONTROL The provided universal remote control Note that the remote may not control Programming II can be programmed to operate most remote-controllable devices. all models of other brands. a code into a remote mode Testing your remote control. To find out whether component your remote control can operate other such as a STB and press the corresponding trol, while pointing at the component. responds If the component correctly.
Remote Control Code VCR _IWA 034 031 033 067 068 012 031 034 041 032 040 102 104 105 107 109 112 113 115 120 122 022 043 048 135 003 007 010 014 _,!!_:::_r i_'_ _£__'_i _'_'_ _'_i_i_!_z_,i_ _ __:,_,_,_ _z_'_,',_,_ _,,i_ AKAI 016 043 125 146 046 124 MARANTZ 072 ANAM BROKSONIC ....
HDSTB AL,PHASTARDSR 123 HOUSTON TRACKER 033 037 AMPLICA 050 057 104 BIRDVlEW 051 126 129 CHANNEL MASTER 013 036 014 055 015 018 CHAPARRAL.
IR CODES 1. How to Connect 01_ Connect your wired remote control 2. Remote Control 0_Output to the Remote Control port on the TV. IR Codes waveform Single pulse, modulated with 37917KHz signal at 455KHz L I- Tc Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 0_Configuration 1 st frame of frame Low custom code High custom Data code code Data code Repeat frame I I m Repeat code 4 Tf 0_Lead code J L 9 ms F J 4.5 4 ms 0_Repeat code -0 -0 m z 0.
POWER OFF Discrete IR Code (Only Power Off) AV2 Discrete IR Code (AV2 Input Selection) COMPONENT2 Discrete IR Code (Component2 > 7E BO m Z C7 X 8F Remote control Button ENTE R Remote Cont rol Button RETURN Remote control Button SIMPLINK Remote €ontrol Button Av MODE Remote control Button PLAY Remote Control Button PAUSE Remote control Button REC Remote control Button REW FF HDMI1 Discrete IR Code (H DMI1 In put Selection ) CC Discrete IR Code (HDMI2 HDMI5 Ratio 4:3 inp
EXTERNALCONTROLTHROUGHRS-232C - Except 32/37/42/47/52LG60, The RS-232C port 42/47LGX allows you connect the RS-232C or an #u/V control system) 01_ Note: RS-232C on this unit is intended The instructions software. to control below are provided input jack to an external control the TV's functions device (such as a computer externally. to be used with third to help with programming party RS-232C software control hardware or to test functionality and software.
RS-232C Configurations Either cable below can be used. PC PC TV RXD TXD TXD RXD TXD RXD GND GND GND GND DTR DSR DTR DTR DSR DTR DSR DSR RTS CTS RTS RTS CTS RTS CTS CTS D-Sub 9 Set ID Use this function to specify Refer to 'Real Data Mapping1 a TV ID number. '. _ p.133. -O -O m z Select OPTION. Select Set ID. Choose the desired TV ID number. The adjustment 1 -99. range of Set ID is Return to the previous menu. Return to TV viewing.
Command Reference 01 Power k 02. Input Select 04.Screen List Mute a O0 - 01 x b (_ p.132) 15. Bass k c (_ p.132) 1 k d O0 ~ 01 05. Volume Mute k e 00 - 01 06. Volume Control k f O0 ~ 64 ntrast k g O0 - 64 08. Brightness k h O0~ 09 k i O0 - 64 10. Tint k j 00 ~ 64 lq k k O0 - 64 12. OSD Select k I 00 - 01 m O0 - 01 64 k e r k S l O0 - 64 00_64 u O0 - 02 18. ISM Method p (_ p.134) 19. Power Saving q....
01. Power (Command: To control 0S. Volume Mute (Command: k a) Power On/Off of the TV. k e) To control volume mute on/off. Transmission [k][a][ ][SetID][ ] [Data][Cr] You can also adjust mute using the MUTE button on Data 00: Power Off Data 01 : Power On remote control.
09. Color (Command: k i) 14. Treble To adjust screen color. (Command: k r) To adjust treble. You can also adjust color in the PICTURE menu. You can also adjust treble in the AUDIO menu. Transmission [k][i][ TransmissiOn [k] [r][ ][Set ID][ ][Data][cr] Data Min: 00 - Max: 64 (*transmit by Hexadecimal code) *Refer to 'Real data mapping' as shown below. ACknowledgemen_ 10.
18. ISM Method (Command: j p) (Only Plasma TV model) To avoid having a fixed image remain on screen. TransmissiOn [j ][p][] [Set iD] [ ] [Data] [Cr] Data 01: Inversion 02: Orbiter 04: White Wash 08: Normal Acknowledgement[p][] [Set ID] [ ] [OKiNG] 19. Power saving (Command: [Data] [x] j q) (Only Plasma TV model) To control the power saving function Transmission[j ] [q][] on/off.
Data 05: The table above lists the binary code which must be converted to Hexadecimal 22. Channel Add/Del (Command: m b) To add and delete the channels before sending. For example: The binary code to tune the sub source to an NTSC TransmlssiOn [m] [b][] cable channel is "1000 Data 00: Channel Delete 0001 ", which translates to "81" in Hex.
OPEN SOURCE LICENSE- This feature is not available for all models. GNU GENERAL PUBLIC LICENSE Version 2, June Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim this license document, but changing it is not allowed. 1991 the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's licensed at all.
b) You must cause any work that you distribute that in whole or in part contains or publish, or is derived c) Accompany from the it with the information offer to distribute corresponding you received as to the source code. (This alter- Program or any part there of, to be licensed as a whole at native is allowed only for noncommercial no charge to all third license.
If, as a consequence of a court patent infringement patent issues), conditions judgment or for any other or allegation of reason (not limited to are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this license, they do not excuse you from the conditions of this license.
END OF TERMS AND CONDITIONS Also add information on how to contact you by electronic and paper mail. How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible If the program is interactive, make it output this when it starts in an interactive mode: a short notice like use to the public, the best way to achieve this is to make it free software which everyone can redistribute under these terms.
GNU LESSER GENERAL PUBLIC LICENSE Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA To protect Everyone is permitted ified by someone else and passed on, the recipients to copy and distribute this license document, [This is the first counts verbatim copies of but changing it is not allowed. released version of the Lesser GPL.
Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that each copy an appropriate is linked with the Library has the freedom and the wherewithal and to the absence of any warranty; and distribute warranty; to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and with the library in order to run. a in exchange for a fee. 2.
3. You may opt to apply the terms of the ordinary GNU General the object file is unrestricted, regardless of whether it is legal- Public License instead of this License to a given copy of the ly a derivative work. Library. To do this, you must alter all the notices that refer to plus portions of the library will still fall under Section 6.
For an executable, the library" the required ed for reproducing cial form of the "work that uses must include any data and utility exception, the executable from it. However, as a spe- the include anything materials to be distributed that is normally distributed and so on) of the operating runs, unless that cutable. of other (compiler, itself proprietary the operating accompanies contradicts kernel, the exe- the license libraries that do not normal- system.
If the library does not specify a license version number, you may choose any version ever published Foundation. 14.1f you wish to incorporate To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively parts of the library into other free programs whose distribution these, write to the author by the Free Software conditions are incompatible to ask for permission.
MOZILLA PUBLIC LICENSE Version 1.1 1 •Definitions• code which is described in the source code notice required by exhibit as original code, and which, at the time 1.0.1. "Commercial use" means distribution the covered code available to a third 1.1. or otherwise making of its release under party. "Contributor" means each entity that tributes to the creation of modifications• this license is not already covered code governed by this license. creates or con- 1.lO.l .
(c) the licenses granted effective in this section 2.1 (a) and (b) are on the date Initial developer original You may not offer or impose any terms on any source code first distributes version that code under the terms of this license. you (d) Notwithstanding section 2.
3.Z (c) Representations. contributor represents that, except as disclosed You may create a larger work by combining with other code not governed modifications are contributor's and/or contributor has sufficient and distribute original creation(s) rights to grant the rights Required notices. covered code by the terms of this license the larger work as a single product. In such a case, you must make sure the requirements license are fulfilled for the covered code. by this license. of this 4.
Z DISCLAIMER OF WARRANTY. COVERED such participant CODE IS PROVIDED UNDER THIS ON AN "AS IS" BASIS, WITHOUT KIND, EITHER WITHOUT sold, distributed, INCLUDING, THE ENTIRE RISK AS TO THE QUALITY or had made, modifications made by that participant. COVERED CODE 8.3. AND PERFOR- MANCE OF SHOULD ANY COVERED CODE PROVE DEFECTIVE IN IS WITH YOU.
11. MISCELLANEOUS• EXHIBIT A -Mozilla Public License• This license represents the complete agreement concerning subject matter hereof. If any provision held to be unenforceable, of this license is such provision shall be reformed only to the extent necessary to make it enforceable• License shall be governed by California (except to the extent applicable erwise), excluding its This law provisions The contents of this file are subject to the Mozilla Public License Version 1.
