OWNER’S MANUAL LED LCD TV / LCD TV Please read this manual carefully before operating your set and retain it for future reference. LED LCD TV MODELS 32LS3400 22LS3500 22LS3510 42LS3400 26LS3500 26LS3510 32LS3410 32LS3500 32LS3510 32LS3450 42LS3450 P/NO : MFL67468111 (1208-REV08) LCD TV MODELS 47LS4500 55LS4500 32CS460 32CS560 32CS461 37CS560 42CS530 42CS560 www.lg.
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS Never touch this apparatus or antenna during yy a thunder or lightning storm. When mounting a TV on the wall, make sure yy not to install the TV by hanging the power and signal cables on the back of the TV. Do not allow an impact shock or any objects yy to fall into the product, and do not drop anything onto the screen. Dot Defect yy The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels.
IMPORTANT SAFETY INSTRUCTIONS DISPOSAL (Hg lamp only used in LCD TVs) The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
IMPORTANT SAFETY INSTRUCTIONS For USA and Canada FCC NOTICE NOTE TO CABLE/TV INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.
TABLE OF CONTENTS TABLE OF CONTENTS ENGLISH 2 IMPORTANT SAFETY INSTRUCTIONS 7 Additional information of the manual 8 TABLE OF CONTENTS 9 INSTALLATION PROCEDURE 9 ASSEMBLING AND PREPARING 9 16 20 21 21 29 31 32 Unpacking Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand - Mounting on a table - Mounting on a wall - Tidying cables 33 MAKING CONNECTIONS 33 34 Connecting to an antenna or cable Connecting to a HD receiver, DVD, or VCR player - HDMI Connection
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING 9 INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.
ASSEMBLING AND PREPARING For CS460, CS461, LS3400, LS3410 series Owner’s manual, CD manual Power Cord Stand Body (See p.21) Stand Base (See p.21) Stand Screws 8 EA, M4 x 20 (See p.21) Protection cover (See p.28) Desk-mount Screw (See p.29) ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 11 For LS3450 series Owner’s manual, CD manual (for 32LS3450) (for 42LS3450) Stand Body / Stand Base (See p.22) Stand Body / Stand Base (See p.23) (for 32LS3450) (for 42LS3450) Stand Screws 2 EA, P4 x 16 4 EA, M4 x 20 (See p.22) Stand Screws 4 EA, P4 x 16 4 EA, M4 x 14 (See p.23) (for 32LS3450) Protection cover (See p.28) Power Cord Desk-mount Screw (See p.29) Cable holder (See p.32) ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING For CS530, CS560 series Owner’s manual, CD manual Power Cord Stand Body (See p.24) Stand Base (See p.24) Stand Screws 8 EA, M4 x 20 (See p.24) Protection cover (See p.28) Desk-mount Screw (See p.29) ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 13 For 22/26LS3500, 22/26LS3510 Remote control, Batteries (AAA) (See p.40) Owner’s manual, CD manual Power Cord (For 22LS3500, 22LS3510) Stand Body (See p.25) Stand Screws 2 EA, P4 x 16 (See p.25) Cable holder (See p.32) AC/DC Adapter ENGLISH Stand Base (See p.25) (For 26LS3500, 26LS3510) Stand Screws 2 EA, M4 x 14 (See p.
ASSEMBLING AND PREPARING For 32LS3500, 32LS3510 Owner’s manual, CD manual Power Cord Stand Body (See p.26) Stand Base (See p.26) Stand Screws 4 EA, P4 x 16 4 EA, M4 x 14 (See p.26) Desk-mount Screw (See p.29) Cable holder (See p.32) ENGLISH Remote control, Batteries (AAA) (See p.
ASSEMBLING AND PREPARING 15 For 47LS4500, 55LS4500 Owner’s manual, CD manual Wall Mount Inner Spacers 4 EA (See p.31) Stand Body (See p.27) Stand Base (See p.27) Stand Screws 8 EA, M4 x 20 (See p.27) Cable holder (See p.32) Power Cord ENGLISH Remote control, Batteries (AAA) (See p.40) (for 47LS4500) Desk-mount Screw (See p.
ASSEMBLING AND PREPARING Parts and buttons For CS460, CS461, CS530, CS560, LS3400, LS3410 series Screen Remote control and Intelligent sensors1 Power indicator ENGLISH Speakers OK SETTINGS INPUT For CS460, CS461, LS3400, LS3410 series Touch buttons2 OK SETTINGS Touch button2 INPUT For CS530, CS560 series Description ꔰ/I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the main menus, or saves your input and exits the menus.
ASSEMBLING AND PREPARING For LS3450 series Buttons Screen OK OK SETTINGS INPUT SETTINGS Speakers Remote control and intelligent sensors1 Power indicator Buttons ꔰ Description Turns the power on or off. HINPUT Changes the input source. SETTINGS S Accesses the main menus, or saves your input and exits the menus. OK Selects the highlighted menu option or confirms an input. H - + Adjusts the volume level. v ^ Scrolls through the saved channels.
ASSEMBLING AND PREPARING For LS3500, LS3510 series Screen Remote control and Intelligent sensors1 Power indicator ENGLISH Speakers OK SETTINGS INPUT Touch button2 Touch buttons2 Description ꔰ/I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the main menus, or saves your input and exits the menus. OK ⊙ Selects the highlighted menu option or confirms an input. - + Adjusts the volume level. v ^ Scrolls through the saved channels.
ASSEMBLING AND PREPARING 19 For LS4500 series Screen Remote control and intelligent1 sensors Speakers OK SETTINGS INPUT 2 Touch button Description /I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the Home menu, or saves your input and exits the menus. OK ꔉ Selects the highlighted menu option or confirms an input - Adjusts the volume level. + v ^ 1 2 Touch buttons2 Scrolls through the saved channels.
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. When transporting a large TV, there should yy be at least 2 people. When transporting the TV by hand, hold the yy TV as shown in the following illustration. CAUTION Avoid touching the screen at all times, as yy this may result in damage to the screen.
ASSEMBLING AND PREPARING 21 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. For CS460, CS461, LS3400, LS3410 series 1 2 4 EA M4 x 20 Stand Body CAUTION Stand Base 3 When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING For 32LS3450 1 2 2EA P4 x 16 Stand Body Stand Base CAUTION 3 ENGLISH When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 4 EA M4 x 20 CAUTION Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING 23 For 42LS3450 1 2 4EA P4 x 16 Stand Body Stand Base CAUTION 3 4EA M4 x 14 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not fasten the screws with too much yy force; otherwise they may be worn out and get loosened.
ASSEMBLING AND PREPARING For CS530, CS560 series 1 2 4 EA M4 x 20 Stand Body Front CAUTION Stand Base ENGLISH 3 When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 4 EA M4 x 20 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING 25 For 22/26LS3500, 22/26LS3510 1 2 Stand Body Stand Base CAUTION 3 (For 22LS3500, 22LS3510) 2 EA P4 x 16 (For 26LS3500, 26LS3510) 2 EA M4 x 14 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely. (If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING For 32LS3500, 32LS3510 1 2 Stand Body 4 EA P4 x 16 CAUTION Stand Base ENGLISH Front When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 3 4 EA M4 x 14 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING 27 For 47/ 55LS4500 1 2 4 EA M4 x 20 Stand Body Front Stand Base ENGLISH 3 CAUTION When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 4 EA M4 x 20 CAUTION NOTE Remove the stand before installing the TV yy on a wall mount by performing the stand attachment in reverse. Make sure that the screws are fastened yy completely.
ASSEMBLING AND PREPARING To detach the stand, (Depending on model) 1 4 EA M4 x 20 CAUTION When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. 2 ENGLISH NOTE This will protect the opening from yy accumulating dust and dirt. When installing the wall mounting yy bracket, use the Protection cover.
ASSEMBLING AND PREPARING Mounting on a table 29 Securing the TV to a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. (For 32CS460, 32CS461, 42CS530, 32/37/42CS560, 32/42LS3400, 32LS3410, 32/42LS3450, 32LS3500, 32LS3510, 47LS4500) Fix the TV to a table to prevent from tilting forward, damage, and potential injury.
ASSEMBLING AND PREPARING Securing the TV to a wall (optional) (Depending on model) Using the Kensington security system (optional) (For 32CS460, 32CS461, 42CS530, 32/37/42CS560, 22/26LS3500, 22/26LS3510) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
ASSEMBLING AND PREPARING Mounting on a wall 31 CAUTION Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall. 10 cm (4 inches) Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur.
ASSEMBLING AND PREPARING Tidying cables For CS460, CS461, CS530, CS560, LS3400, LS3410 For 22/26LS3500, 22/26LS3510 1 Gather and bind the cables with the cable 1 Gather and bind the cables with the cable management clip. holder. 2 Fix the cable management clip firmly to the TV. Cable holder ENGLISH For 32LS3500, 32LS3510, 32/42LS3450, 47/55LS4500 Cable management clip 1 Gather and bind the cables with the cable holder.
MAKING CONNECTIONS 33 MAKING CONNECTIONS This part of MAKING CONNECTIONS mainly uses picture for LS4500 series. yy Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration. NOTE Use the latest High Speed HDMI™ Cable with CEC (Customer Electronics Control) function.
MAKING CONNECTIONS 35 Component Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with yy distorted color. Check to ensure the cable are matched with the corresponding color connection.
MAKING CONNECTIONS Composite Connection Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
MAKING CONNECTIONS 37 Connecting to a PC NOTE It is recommended to use the TV with the HDMI connection for the best image quality. yy Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or yy brightness.
MAKING CONNECTIONS Connecting to an Audio System (For LS4500) You may use an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature yy to off. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration.
MAKING CONNECTIONS 39 Connecting to a USB Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV.
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL ENERGY 41 POWER TV SAVING AV MODE INFO RATIO INPUT FLASHBK Q.MENU Accesses the quick menu. Navigation buttons (up/down/left/right) Scrolls through menus or options. OK ꔉ Selects menus or options and confirms your input. ꕣ (BACK) Returns to the previous level. EXIT ꕯ Clears all on-screen displays and returns to TV viewing. LIST SETTINGS SETTINGS Accesses the main menu. Q.
WATCHING TV WATCHING TV Connecting to the AC/DC adapter (For 22/26LS3500, 22/26LS3510) 3 Follow the on-screen instructions to customize your TV settings according to your preferences. Language Selects a language to display. Mode Setting Selects Home Use for the home environment. Time Setting Selects the time zone and daylight saving. Auto Tuning 1 Connect the AC/DC adapter plug to the power input jack on the TV.
TROUBLESHOOTING / OPEN SOURCE SOFTWARE NOTICE 43 TROUBLESHOOTING Problem Solution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to yyCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS MODELS Dimensions (W x H x D) Weight 795.0 x 566.0 x 207.0 mm (31.2 x 22.2 x 8.1 inch) 1018.0 x 696.0 x 261.0 mm (40.0 x 27.4 x 10.2 inch) Without stand 795.0 x 504.0 x 73.5 mm (31.2 x 19.8 x 2.8 inch) 1018.0 x 629.0 x 76.5 mm (40.0 x 24.7 x 3.0 inch) With stand 9.1 kg (20.0 lbs) 14.7 kg (32.4 lbs) Without stand 8.1 kg (17.8 lbs) 13.1 kg (28.8 lbs) 1.0 A / 70 W 1.
SPECIFICATIONS 47LS4500 (47LS4500-UD) MODELS Dimensions (W x H x D) Weight With stand 1089.0 mm x 730.0 mm x 270.0 mm 1263.0 mm x 833.0 mm x 330.0 mm (42.8 inch x 28.3 inch x 10.5 inch) (49.7 inch x 32.8 inch x 12.9 inch) Without stand 1089.0 mm x 655.0 mm x 35.5 mm (42.8 inch x 25.7 inch x 1.3 inch) 1263.0 mm x 754.0 mm x 35.5 mm (49.7 inch x 29.6 inch x 1.3 inch) With stand 17.0 kg (37.5 lbs) 25.2 kg (55.2 lbs) Without stand 14.9 kg (32.8 lbs) 21.9 kg (48.2 lbs) 1.2 A / 120 W 1.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.