Installation Manual

Table Of Contents

USB Cloning

An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the

same Master TV Setup: Public Display Settings, Installation menu settings, User A/V settings and the Channel

Map. This newer procedure significantly decreases the installation time that would be necessary if the

standard RS-232C method were used instead.

Introduction

1 Overview USB Cloning Procedure

• Commercial TVs have the capability to support cloning internal TV data and Channel information with

an external clone device called USB Cloning, in order to copy TV data accurately and quickly. The clone

internal functions use slightly different internal processes for the two types of commercial TVs. However,

the UI of cloning feature remains the same in both. Regarding the demands over the current cloning

feature for quicker cloning, better portability and etc, we would like to announce the cloning process via

USB port, named as USB Cloning. USB cloning process is divided into 2 main processes. One is writing the

previously saved TV data into the TV, and one another is reading of current TV data into USB memory card.

To avoid any confusion due to the words, it is clearly specified as Receive from USB and Send to USB in the

whole process.

2 Data To Be Cloned

• The data cloned are the same data cloned by previous USB Cloning. Details are explained in the following:

1. TV data includes:

A. Installer Menu settings

B. Main menu settings (Audio, Picture etc)

2. Analog / Digital Channel information includes:

A. Channel numbers

B. Channel label

C. Channel attributes including channel type, skipping status and etc.

3 Input Source

The user needs a USB memory card with FAT formatted to make successive cloning via USB port. A USB

memory card size more than 128 MB and less than 4 GB is recommended.

NOTE

• Currently, support the preceding USB file system for FAT file format only. Other file formats including NTFS

is not currently supported. Microsoft Windows officially supports FAT for the USB memory card.

ENGLISH