Installation Manual

Limited Mode
Configure TV function’s limitation. When selected to On, following sub-menus will be worked by below.
Setup Menu
Decide to enter Channels of user menu as On (Enter possible) or Off (Enter impossible).
• When Setup Menu is set to On
- The Channels of user menu is disabled.
• When Setup Menu is set to Off
- The Channels of user menu is enabled.
Input Source Change
Decide to change input source or not by setting Input Source Change as On (Change possible) or
Off (Change impossible).
• When Input Source Change is set to Off (Change impossible)
- Input key doesn’t work, and input source changing via TV D/A key, TV/RADIO key aren’t possible
(ex. Press TV/RADIO Key in HDMI source to view TV channel)
- User’s input (pressing Channel key, numeral key, List key, Flash back key in all Input source except
TV source) doesn’t work.
- Entering Channels of User Menu item in the main menu OSD except TV mode doesn’t accepted.
Because entering Channels item of User Menu makes present mode as TV mode even though
present mode is not TV. Change to TV mode isn’t allowed.
- Entering Channels of User Menu except TV mode is impossible regardless of Channel Change or
Channels items’ value of User Menu.
- TV can be only turned on with the input source which is irrelevant from the programme related
information set (volume, input) in Timer Power On of User Menu.
- Auto AV and HDMI-CEC still work regardless of Input Source Change’s value.
• When Input Source Change is set to On (Change possible), changing input source is available.
Channel Change
Decide to change channel or not by setting Channel Change as On (Change Possible) or Off
(Change Impossible) when present source is TV.
• When Channel Change is set to Off (Change Impossible)
- Channel Key, Numeral Key, List Key, Flash back Key don’t work and entering channel Menu in the
Main Menu OSD is impossible.
- Channel item in Timer Power On of User menu will be fixed.
- Entering Channels of User Menu is impossible regardless of Channels item of User Menu.
• When Channel Change is set to On (Change Possible), Channel Key, Numeric Key, List Key, Flash
back Key does work and entering Channel Menu in the Main Menu OSD is possible.
7
ENGLISH