ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. 12 14 16 LED TV 49LT340C0UB 20 X4 (M4 x L16) www.lg.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
5 6 7 B A B B A A
Kg 49LT340C0UB 1,110 1 110 705 705 (43.7) (43,7) (27.7) (27,7) 235 (9.2) 235 (9,2) 650 650 (25.5) (25,5) 81.1 (3.1) 81,1 (3,1) 11.4 11,4 11.3 11,3 (25.1) (25,1) (24.
*MFL71382505* (1901-REV00)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 32LT340CBUB 32LT340HBUA 32LT560HBUA 32LT570HBUA 43LT340C0UB 43LT340H0UA 43LT560H0UA 43LT570H0UA 49LT340C0UB 49LT340H0UA 49LT560H0UA 49LT570H0UA *MFL71402002* (1911-REV03) www.lg.com Copyright © 2019 LG Electronics Inc. All Rights Reserved.
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Disconnecting the Device from the Main Power -- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible. •• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. •• Outdoor Antenna Grounding (Can differ by country): -- If an outdoor antenna is installed, follow the precautions below.
Preparing •• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
ENGLISH Optional Extras Lifting and Moving the TV Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies. (Depending upon model) When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.
•• Avoid touching the screen at all times, as this may result in damage to the screen. •• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen. •• Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur.
Attaching the TV to a desk (TYPE B) ENGLISH (Depending upon model) If mounting the TV on a table, make sure it is installed according to the method outlined in ‘Attaching the TV to a desk’. The TV should be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. (TYPE A) 2-Screws for Stand Fixing, 2-Washers for Stand Fixing, 2-Nuts for Stand Fixing (Provided as parts of the product.
1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface. •• Use a platform or cabinet that is strong and large enough to support the TV securely. •• Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.
•• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model) Connections ENGLISH You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Antenna/Cable Stand hole Connect an antenna, cable, or cable box to watch TV while referring to the following.
USB Method of volume control port (Depending upon model) •• Cable Spec. Each Up / Down pin is pulled to 3.3 V with CPU GPIO. External Speakers GND / UP / DOWN EXTERNAL SPEAKER OUT or SPEAKER OUT LINE OUT VOLUME CONTROL UP - CPU detects transition from 3.3 V to GND level for volume control. External Devices Control port for Speaker out + ENGLISH •• It is recommended that you use an external USB HDD with a rated voltage of 5 V of less and a rated current of 500 mA or less.
Using the Button Network setup (Depending upon model) ENGLISH You can simply operate the TV functions, using the button. Wired network connection This TV can be connected to a Pro:Centric server via the port. After making the physical connection, the TV needs to be set up for network communication. Connect the port of the Modem or Router from Pro:Centric server to the port on the TV.
Adjusting the Menu Turns the power off. Changes the input source. Scrolls through the saved channels. Adjusts the volume level. Adjusting the Angle of the TV to suit view Using Remote Control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover.
* To use the button, press and hold for more than 3 seconds. (TYPE B) (For series of LT560H, LT570H) ENGLISH (Power) Turns the TV on or off. Returns to the last TV channel. Activates or deactivates the subtitles. Shows information on the current program. Resizes an image. (Input) Changes the input source. Number button Enters numbers. (Dash) Inserts a dash between numbers such as 2-1 and 2-2. Accesses the saved channel list. Alternates between the two last channels selected (pressing repeatedly).
(Power) Turns the TV on or off. Changes the input source. Not functional. Number button Enters numbers (Dash) Inserts a dash between numbers such as 2-1 and 2-2. (Space) Not functional. Tunes to the last channel or input viewed. Adjusts the volume level. Switches between Letter and Number input modes. Selects a closed caption. Turns the TV off in a set amount of time. Deletes letters and numbers. Mutes all sounds. Scrolls through the saved channels. Moves to the previous or next screen.
ENGLISH •• The TV turns off suddenly. -- Check the power control settings. The power supply may be interrupted. -- Check if the auto-off function is activated on the settings related time. -- If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. •• When connecting to the PC (HDMI), no signal is detected. -- Turn the TV off/on using the remote control. -- Reconnect the HDMI cable. -- Restart the PC with the TV on.
To set additional picture options (For series of LT340C, LT340H) (Settings) [Picture] [Picture Mode Settings] [Picture Options] Adjusts detailed setting for images. •• [Noise Reduction] Eliminates noise in the picture. •• [MPEG Noise Reduction] Eliminates noise generated while creating digital picture signals. •• [Black Level] Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen.
ENGLISH Settings To set additional picture options (For series of LT560H, LT570H) [Picture] [Picture Mode Settings] [Picture Options] Adjusts detailed setting for images. •• [Noise Reduction] Eliminates noise in the picture. •• [MPEG Noise Reduction] Eliminates noise generated while creating digital picture signals. •• [Black Level] Adjusts the brightness and contrast of the screen to suit the black level of the input picture by using the blackness (black level) of the screen.
Specifications Product specifications may be changed without prior notice due to upgrade of product functions.
RGB (PC) supported mode My Media Supported Files (For series of LT340C, LT340H) * Maximum data transfer rate: 20 Mbps (Mega bit per second) •• External supported subtitle formats: *.srt, *.smi, *.sub (Only for SubViewer 1.0/2.0), *.ass, *.ssa, *.txt ENGLISH Resolution 640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1152 x 864 1360 x 768 1280 x 10241 1920 x 10801 1 Horizontal Vertical Frequency (kHz) Frequency (Hz) 31.46 70.09 31.46 70.08 31.46 59.94 37.87 60.31 48.36 60.00 54.34 60.05 47.71 60.
Supported Audio Formats Info (Bit rate) 32 Kbps ~ 320 Kbps (Sample freq.) 16 kHz ~ 48 kHz MP3 (Support) MPEG-1, MPEG-2, Layer 2, Layer 3 (Bit rate) Free Format AAC (Sample freq.) 8 kHz ~ 48 kHz (Support) ADIF, ADTS (Bit rate) Free Format M4A (Sample freq.) 8 kHz ~ 48 kHz (Support) MPEG-4 (Bit rate) 128 Kbps ~ 320 Kbps (Sample freq.) 8 kHz ~ 48 kHz WMA (Support) WMA7, WMA8, WMA9 Standard (Bit rate) ~ 768 Kbps (Channel / Sample freq.) M0: Up to 2 Channel @ 48 kHz (Except WMA 10 LBR mode), Pro M1: Up to 5.
KEY CODES (TYPE A) * This feature is not available for all models.
KEY CODES (TYPE B) * This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP * Image shown may differ from your TV. * The connection interface may differ from your TV. RS-232C Setup •• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. •• Connect the serial port of the control device to the RS232C jack on the product back panel. NOTE •• The type of control port on the TV can be different between model series.
Connector type : D-Sub 9-pin male 5 6 ENGLISH 1 9 RS-232C (Serial port) RS-232C configurations 7-Wire Configurations 3-Wire Configurations (Standard RS-232C cable) (Not standard) PC TV PC RXD 2 3 TXD RXD TV 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DTR DTR 4 6 DTR DSR 6 4 DSR DSR 6 4 DSR RTS 7 8 RTS RTS 7 8 RTS CTS 8 7 CTS CTS 8 7 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID For Set ID number, see “Real data mapping
Communication Parameters ENGLISH •• Baud rate : 9600 bps (UART) •• Data length : 8 bits •• Parity : None •• Stop bit : 1 bit •• Communication code : ASCII code •• Use a crossed (reverse) cable.
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon model) ENGLISH Transmission (Command1)(Command2)( )([Set ID])( )(Data)(Cr) (Command 1) : First command to control the TV. (j, k, m or x) (Command 2) : Second command to control the TV. ([Set ID]) : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
1 Power (Command: k a) ►►To control power on or off of the set. Transmission ENGLISH (k)(a)( )([Set ID])( )(Data)(Cr) Data 00 : [Off] Data 01 : [On] Ack (a)( )([Set ID])( )(OK/NG)(Data)(x) ►►To show TV is power on or off. Transmission (k)(a)( )([Set ID])( )(FF)(Cr) Ack (a)( )([Set ID])( )(OK/NG)(Data)(x) * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. * OK Ack., Error Ack.
10 [Sharpness] (Command: k k) ►►To adjust screen contrast. You can also adjust contrast in the picture settings. ►►To adjust the screen sharpness. You can also adjust sharpness in the picture settings. Transmission Transmission (k)(g)( )([Set ID])( )(Data)(Cr) Ack (g)( )([Set ID])( )(OK/NG)(Data)(x) ENGLISH 6 [Contrast] (Command: k g) (k)(k)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 32 Ack (k)( )([Set ID])( )(OK/NG)(Data)(x) 7 [Brightness] (Command: k h) ►►To adjust screen brightness.
ENGLISH 13 [Treble] (Command: k r) 17 [Equalizer] (Command : j v) (Depending upon model) ►►Adjust EQ of the set. ►►To adjust treble. You can also adjust Treble in the audio settings. Transmission Transmission (k)(r)( )([Set ID])( )(Data)(Cr) Data Min : 00 to Max : 64 (j)(v)( )([Set ID])( )(Data)(Cr) MSB 0 LSB 0 0 0 0 0 0 0 Ack (r)( )([Set ID])( )(OK/NG)(Data)(x) 14 [Bass] (Command: k s) (Depending upon model) ►►To adjust bass. You can also adjust Bass in the audio settings.
19 Tune Command (Command: m a) * This command may work differently Depending upon model and signal. ►►Select channel to following physical number.
•• Analog Antenna/Cable ENGLISH Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV): 01~87 (Decimal: 1~135) (Data 01 ~ 04): Major/Minor Channel Number Data 01 & 02: xx (Don’t care) Data 03 & 04: xx (Don’t care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) •• Digital Antenna/Cable Data 00 : xx (Don’t care) (Data 01)(Data 02): Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F (Decimal:
•• Digital Antenna/Satellite •• Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1. [Set ID] = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02 2 Tune to the BS (ISDB-BS) channel 30.
23 Input select (Command: x b) (Main Picture Input) ►►To select input source for main picture.
IR OUT Using Guide Item Data format code Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Suitable Data Format Not Recommend Data Format ENGLISH Suitable / Not Recommend remote-controller data format Single : Enable Repeat : Enable Single : Enable Repeat : Disable Single : Disable Repeat : Disable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format IR Receiver specifications Carri
Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Regulatory (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ENGLISH Industry Canada Statement RSS-247 Requirement (For Canada) [For having wireless function (WLAN, Bluetooth,...)] This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.
NOTE TO CABLE/TV INSTALLER Refers to alternating current(AC). Refers to direct current(DC). ENGLISH (For USA and Canada) This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. Symbols Refers to class II equipment.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Supplier’s Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 1000 Sylvan Ave Englewood Cliffs, NJ 07632 Telephone (201)266-2215 The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service. MODEL SERIAL NO. LG Customer Information Center For inquires or comments, visit www.lg.