Installation Manual

30

Sets the sending and receiving scenario of the operation about [CEC Op standBy(0x0c)
Command(Device Power)].

The detailed scenario is described on the table below.
(c) Stand By
Send Receive
Send Only O X
Receive Only X O
All O O
OFF X X

If the following options are selected because of the HTNG command:
*Power On Default, Start Volume, Maximum Volume, Minimum Volume, or Start Volume,
then the value for the HTNG HotelMode changes automatically to Yes and, even if the
HotelMode is set to No, the above options are still affected.

If you change it to No, then the values set by the HTNG will be canceled.
(2) HTNG HotelMode