Installation Manual

32
No Signal Image
(* Only for LX540S, LX530S series)
Use the button to select the No Signal Image and then press the OK button.
1
(1) No Signal Image

Enables or disables No Signal Image.
(2) Mode

Select Original, Fit, or Full Mode as the mode for No Signal Image.
- Original: displays the original size of the image stored on your USB storage.
- Fit: displays the image at a size that fits the aspect ratio of the TV.
- Full: displays the image at a size that fits the full screen of the TV.
(2) Slide Time

Select 5, 10, 15, or 20 seconds to display the selected image.
Installation Menu (V 3.0)
Public Display Settings
TV Manager
Password Change
Set ID Setup
Configuration Setup
Multi Timer
Lock Mode
External Speaker
HCEC Setup
SuperSign Server Setup
Welcome Video
NTP Timer Sync
No Signal Image
OK
S/W : 02.00.00.01 Micom : 0.00.84

Image shown may differ from your TV.
No Signal Image
Mode
Slide Time
No Signal Image
◄ Enable ►
Full
5

This feature allows you to display an image you have stored on the TV instead of the LG
Cube when there is no signal due to DTV signal attenuation, external device failure, or cable
removal.
OK
Previous