OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 32LX330C 42LX330C 49LX341C 55LX341C 60LX341C 65LX341C 42LX530S *MFL68925802* 49LX540S 55LX540S 60LX540S 65LX540S 43LX310C 49LX310C www.lg.
Important Safety Instructions Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. ••Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ENGLISH TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
••Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. ••Unplug this apparatus during lightning storms or when unused for long periods of time. ••Refer all servicing to qualified service personnel.
••Grounding (Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.
Preventing Image Burn or Burn-in on Your TV Screen ••If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty. ••If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. ••Avoid displaying a fixed image on the TV screen for a long period of time to prevent image burn.
ENGLISH FCC Notice FCC RF Radiation Exposure Statement (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WARNING (For Canada) [For product having the wireless function using 5 GHz frequency bands] ••The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; ••The maximum antenna gain permitted for devices in the bands 5250–5350 MHz and 5470–5725 MHz shall comply with the EIRP limit; and ••The maximum antenna gain permitted for devices in the band 5725–5825 MHz shall comply with the EIRP limits specified for
Warning when using USB storage devices ••USB storage devices with a built-in auto recognition program or its own driver may not work. ••Some USB storage devices may not work or may work improperly. ••Use only those USB storage devices formatted with FAT32 or NTFS File System provided by Windows. ••For external USB HDD, use devices with less than 5V-rated voltages and 500 mA-rated current. ••It is recommended to use USB flash drive with 32 GB or less and USB HDD with 2 TB or less.
CAUTION ••Avoid touching the screen at all times, as this may result in damage to the screen. ••Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen. ••Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur. (Depending upon model) Adjusting the Menu When the TV is turned on, press the joystick button one time.
CAUTION ••Do not place the TV near or on sources of heat, as this may result in fire or other damage. Using the Kensington Security System (optional) (Depending upon model) (Image shown may differ from your TV.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table.
32LX330C 43LX310C VESA (A x B) 200 x 200 Standard screw M6 Number of screws 4 Wall mount bracket LSW240B (optional) MSW240 Model 49LX341C 55LX341C Model 49LX540S 55LX540S 49LX310C VESA (A x B) 300 x 300 Standard screw M6 Number of screws 4 Wall mount bracket LSW350B (optional) MSW240 42LX330C 42LX530S 400 x 400 M6 4 LSW440B MSW240 ••When using the wall mounting bracket, apply the adhesive protective label to cover the unused stand opening(s). This will prevent the accumulation of dust and dirt.
NOTE ••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device. ••The external device connections shown may differ slightly from illustrations in this manual. ••Connect external devices to the TV regardless about the order of the TV port. ••If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Accesses the saved channel list. Alternates between the two last channels selected (pressing repeatedly). Adjusts the volume level. Accesses your favorite channel list. igital signal : Changes the audio language. D Analog signal : Changes the MTS sound. FLASHBK Mutes all sounds. Scrolls through the saved channels. AUDIO Moves to the previous or next screen. C D To select Picture Mode To Use Energy Saving Feature C Changes the image mode. Shows information on the current program.
To set Motion Eye Care [Depending upon model] SETTINGS PICTURE Picture Mode Picture Option ••Motion Eye Care Automatically adjusts brightness and reduces image blur based on image data to reduce eyestrain. Specifications Product specifications may be changed without prior notice due to upgrade of product functions.
Component Supported Mode Resolution 720 x 480i 720 x 480p 1280 x 720p 1920 x 1080i 1920 x 1080p Horizontal Frequency (kHz) 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 Vertical Frequency (Hz) 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00 Supported Video Formats Supported Audio Formats ••File type : mp3 [Bit rate] 32 Kbps - 320 Kbps [Sample freq.
Supported Photo Formats ••Category : 2D (jpeg, jpg, jpe), 3D (jps) [Available file type] SOF0: Baseline, SOF1 : Extend Sequential, SOF2 : Progressive [Photo size] Minimum : 64 x 64, Maximum : Normal Type: 15360 (W) x 8640 (H), Progressive Type : 1920 (W) x 1440 (H) ••Category : BMP [Photo size] Minimum : 64 x 64 Maximum : 9600 x 6400 ••Category : PNG [Available file type] Interlace, Non-Interlace [Photo size] Minimum : 64 x 64 Maximum : Interlace : 1200 x 800, Non-Interlace : 9600 x 6400 ••BMP and PNG forma
Key Codes ••This feature is not available for all models.
External Control Device Setup ••Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. ••Please be advised that not all models support this type of connectivity. ••Cable is not provided.
Customer Computer RS-232C Configurations 3-Wire Configurations(Not standard) 1 5 6 9 RS-232C (Serial port) PC TV RXD 2 2 TXD TXD 3 1 RXD GND 5 3 GND OR RXD 3 2 TXD TXD 2 1 RXD GND 5 3 GND D-Sub 9 Phone Set ID For Set ID number, see Real Data Mapping. 1. Press SETTINGS to access the main menus. ENGLISH 2. Press the navigation buttons to scroll to (General → About this TV or OPTION) and press OK. 3. Press the navigation buttons to scroll to SET ID and press OK. 4.
Communication Parameters ••Baud rate : 9600 bps (UART) ••Data length : 8 bits ••Parity : None ••Stop bit : 1 bit ••Communication code : ASCII code ••Use a crossed (reverse) cable. Command Reference List (Depending upon model) 01. Power* COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 to 01 DATA (Hexadecimal) COMMAND1 COMMAND2 15. Balance k t 00 to 64 ENGLISH 02. Aspect Ratio k c (page 22) 16. Color (Colour) Temperature x u 00 to 64 03. Screen Mute k d (page 22) 17.
Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] [Command 2] [Set ID] First command to control the TV. (j, k, m or x) Second command to control the TV. You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
••Commands may work differently depending upon model and signal. 01. Power (Command: k a) 10 : Video mute on ▶▶ To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 00 : *Power On Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
07. Brightness (Command: k h) 12. Remote control lock mode (Command: k m) ▶▶ To adjust screen brightness. You can also adjust brightness in the PICTURE menu. ▶▶ To lock the front panel controls on the monitor and remote control. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [h][ ][Set ID][ ][OK/NG][Data][x] 08. Color/Colour (Command: k i) ▶▶ To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu.
16. Color(Colour) Temperature (Command: x u) ▶▶ To adjust colour temperature. You can also adjust Color(Colour) Temperature in the PICTURE menu. * (Depending upon model) Ack [q][ ][Set ID][ ][OK/NG][Data][x] Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 20. Tune Command (Command: m a) Ack [u][ ][Set ID][ ][OK/NG][Data][x] 17. ISM Method (Command: j p) (Only Plasma TV) ▶▶ To control the ISM method. You can also adjust ISM Method in OPTION menu.
3. Tune to the satellite (DVB-S) Channel 1000. Set ID = All = 00 Data 00 & 01 = Channel Data is 1000 = 03 E8 Data 02 = Digital Satellite TV = 40 Result = ma 00 03 E8 40 Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][x][a][ ][Set ID][ ][NG][Data 00][x] • For South Korea, North/Latin America except Colombia Model ▶▶ To tune channel to following physical/major/minor number.
* Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02 Ack [g][ ][Set ID][ ][OK/NG][Data][x] • For Plasma TV ▶▶ To control the panel light. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 2. Tune to the BS (ISDB-BS) channel 30.
* If [Data 00] is 00 (3D On), [Data 03] has no meaning. * If [Data 00] is 01 (3D off) or 02 (3D to 2D), [Data 01], [Data 02] and [Data 03] have no meaning. * If [Data 00] is 03 (2D to 3D), [Data 01] and [Data 02] have no meaning. * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only. * All 3D pattern options ([Data 01]) may not be available according to broadcasting/video signal.
CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER ELECTRONICS INDUSTRY CARES • Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable. • As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
LG Customer Information Center Declaration of Conformity Trade Name: LG Model: 32LX330C-UA, 42LX330C-UA, 49LX341C-UA, 55LX341C-UA, 60LX341C-UA, 65LX341C-UA, 42LX530S-UA 49LX540S-UA, 55LX540S-UA, 60LX540S-UA, 65LX540S-UA, 43LX310C-UA, 49LX310C-UA Responsible Party: LG Electronics Inc. Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 For inquires or comments, visit www.lg.
ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement.
i 1 ENGLISH ESPAÑOL FRANÇAIS Read Safety and Reference. Leer Seguridad y Consultas. Lisez Sécurité et références.
2 ENGLISH ESPAÑOL FRANÇAIS Image shown may differ from your TV. La imagen puede ser diferente a la de su televisor. Cette illustration peut ne pas correspondre à votre téléviseur.
B 1 49/55/60/65LX540S 1
3 4 1 2 3 4
5 ENGLISH MODELS Dimensions (W x H x D) With stand Without stand With stand Without stand Power requirement Current value / Power consumption Weight MODELS Dimensions (W x H x D) With stand Without stand With stand Without stand Power requirement Current value / Power consumption Weight 49LX341C (49LX341C-UA) 49LX540S (49LX540S-UA) 1,106 x 697 x 220 (mm) 43.5 x 27.4 x 8.6 (inches) 1,106 x 647 x 37 (mm) 43.5 x 25.4 x 1.4 (inches) 17.6 kg (38.8 lbs) 14.4 kg (31.
ESPAÑOL FRANÇAIS MODELOS MODÈLES Dimensiones Con base (Ancho x altura x Avec support profundidad) Dimensions (L x H x P) Peso Poids Sin base Sans support Con base Avec support Sin base Sans support Potencia requerida Alimentation Corriente de consumo / Consumo de la potencia Valeur courante / Consommation électrique MODELOS MODÈLES Dimensiones Con base (Ancho x altura x Avec support profundidad) Dimensions (L x H x P) Peso Poids Sin base Sans support Con base Avec support Sin base Sans support Potencia
*MFL68884912* (For USA and Canada only) (Para Estados Unidos y Canadá) This product qualifies for ENERGY STAR in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR. Refer to ENERGYSTAR.gov for more information on the ENERGY STAR program.
