LED TV LX76** LW73** www.lg.
i
1 1 2 3-A b d b 32/40LX76** 32/40LW73** 4-B a 43/49/55LX76** 43/49/55LW73** 3-B c c 4-A 32/40LX76** 32/40LW73** 5 + d 43/49/55LX76** 43/49/55LW73** c + d
A-1 : Depending on model / 32/40LX76** 32/40LW73** 2 A H/P OUT IN 2 USB IN 1 USB IN 2 B
A-2 : Depending on model / H/P OUT 2 IN 1 2 43/49/55LX76** 43/49/55LW73**
B-1 LX76** IN 1(ARC) OPTICAL DIGITAL AUDIO OUT VOLUME CONTROL 13/18V 700mA Max LNB Satellite IN L VIDEO ANTENNA / CABLE IN R AUDIO VIDEO L (MONO) AUDIO R
B-2 LW73** VOLUME CONTROL IN (ARC) OPTICAL DIGITAL AUDIO OUT L RS-232C IN R (CONTROL & SERVICE) VIDEO L/MONO AUDIO R CLOCK VIDEO L/MONO AUDIO R L R VIDEO L (MONO) AUDIO R AV IN AV IN 13/18V 700mA Max LNB Satellite IN ANTENNA / CABLE IN
3 4 5 1 2 3 4 : Depending on model /
A F E B G D C 32LX761H-GA 32LX765H-GA 32LW731H-GA 40LX761H-GA 40LX765H-GA 40LW731H-GA 43LX761H-GA 43LX765H-GA 43LW731H-GA 49LX761H-GA 49LX765H-GA 49LW731H-GA 55LX761H-GA 55LX765H-GA 55LW731H-GA A x B x C (mm) 734 x 489 x 282 911 x 576 x 282 973 x 624 x 325 1106 x 701 x 325 1242 x 780 x 325 A x E x F (mm) 734 x 438 x 55.3 911 x 528 x 55.3 973 x 573 x 55.1 1106 x 647 x 55.1 1242 x 724 x 55.1 D (kg) 8.2 10.4 13.6 17.8 21.1 - G 5.3 7.5 10.2 14.4 17.
OWNER’S MANUAL Safety and Reference LED TV* * Disclaimer LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com Copyright © 2015 LG Electronics Inc. All Rights Reserved.
Safety instructions Please read these safety precautions carefully before using the product. ENGLISH WARNING Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
Des ENGLISH Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product. Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention. Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.
CAUTION ENGLISH If any of the following occur, unplug the product immediately and contact your local service centre. • The product has been impacted by shock • The product has been damaged • Foreign objects have entered the product • The product produced smoke or a strange smell This may result in fire or electric shock. Unplug the TV from AC mains wall socket if you do not intend to use the TV for a long period of time.
Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Only use the specified type of battery. This could cause damage to the remote control. Please follow the installation instructions below to prevent the product from overheating. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
ENGLISH Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen. Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration.
Preparing NOTE Displaying a still image for a prolonged period of time may cause image sticking. Avoid displaying a fixed image on the TV screen for a long period of time. Generated Sound “Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.
Maintenance CAUTION ENGLISH • Do not use any unapproved items to ensure the safety and product life span. • Any damage or injuries caused by using unapproved items are not covered by the manufacturer’s warranty. • Some models have a thin film attached on to the screen and this must not be removed. • When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
Lifting and moving the TV Using the joystick button Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. (Image shown may differ from your TV.) • Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Mounting on a table (Image shown may differ from your TV.) ENGLISH 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm 10 cm Adjusting the angle of the TV to suit view (This feature is not available for all models.) • Image shown may differ from your TV. Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ 10 cm 10 cm 2 Connect the power cord to a wall outlet.
Attaching the TV to a desk B type ) (This feature is not available for all models.) ENGLISH • Image shown may differ from your TV. The TV should be attached to a desk so it cannot be pulled in a forward/ backward direction, potentially causing injury or damaging the product.
Using the kensington security system (This feature is not available for all models.) ENGLISH • Image shown may differ from your TV. The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www. kensington.com. Connect the Kensington security system cable between the TV and a table.
A B • When installing the wall mounting bracket, use the adhesive label provided. The adhesive label will protect the opening from accumulating dust and dirt. (Only when the label is provided) Provided item ENGLISH CAUTION • Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur. • Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
Connections (notifications) ENGLISH Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. NOTE • The external device connection may differ from the model.
Speaker Output Setup Network Setup • Image shown may differ from your TV. Wired network connection ENGLISH (Depending on model) • Image shown may differ from your TV. This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
Other connections A ENGLISH Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Some separate cable is not provided. Remote control The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.
Licenses C screen. Navigation buttons (up/down/left/right) Scrolls through menus or options. Selects menus or options and confirms your input. Accesses the Quick Settings. (BACK) Returns to the previous level. Clears on-screen displays and return to TV viewing. Supported licenses may differ by model. For more information about licenses, visit www.lg.com. ENGLISH Shows programme guide. Displays and removes hotel interactive menu.
Open source software notice information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Specifications (Depending on country) ENGLISH Wireless module(LGSBW41)Specifications Wireless LAN (IEEE 802.11a/b/g/n) Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 16 dBm 5150 to 5250 MHz 16 dBm 5725 to 5850 MHz (Not for EU) 11.5 dBm Bluetooth Frequency Range Output Power (Max.) 2400 to 2483.5 MHz 10 dBm As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.
Component Port Connecting Information HDMI-DTV supported mode (Depending on model) ENGLISH Component ports on the TV Video output ports on DVD player Y PB PR Y Y PB B-Y PR R-Y Y Cb Cr Y Pb Pr Signal Component 480i/576i O 480p/576p O 720p/1080i O 1080p O (50 Hz / 60 Hz only) Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640 x 480 31.46 59.94 648 x 480 31.50 60.00 720 x 480 31.47 31.50 59.94 60.00 720 x 576 31.25 50.00 1280 x 720 37.50 44.96 45.
Video Codec Extension Codec .3gp .3g2 .mpg .mpeg .dat .vob .rm .rmvb Info Bit rate 32 Kbps - 320 Kbps Sample freq. 16 kHz - 48 kHz Support MPEG1, MPEG2 Channels mono, stereo Sample freq. ~384 kHz Support PCM Channels mono, stereo Sample freq. 8 kHz - 48 kHz VC-1 Advanced Profile (WMVA excluded), VC-1 Simple and Main Profiles Audio WMA Standard (WMA v1/ WMA Speech excluded), WMA 9 Professional Video DivX3.11, DivX4, DivX5, DivX6, XViD(except 3 warp-point GMC), H.
IR CODES yy This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP Type of Connector : D-Sub 9-Pin Male 1 5 ENGLISH RS-232C Setup • Image shown may differ from your TV. Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE • RS-232C connection cables are not supplied with the product.
Command Reference List RS-232C Configurations (Depending on Model) 7-Wire Configurations (Standard RS-232C cable) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) PC TV RXD TXD GND DTR DSR RTS CTS 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID Set ID number. “Real data mapping.
Transmission / Receiving Protocol (Depending on Model) ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] 01. Power (Command: k a) ►► To control Power On/Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] [Command 1] : First command to control the TV.(j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu.
03. Screen Mute (Command: k d) 07. Brightness (Command: k h) ►► To select screen mute on/off. ►► To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][d][ ][Set ID][ ][Data][Cr] 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on Ack [d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD. 04.
11. OSD Select (Command: k l) 15. Energy Saving (Command: j q) ►► To select OSD (On Screen Display) on/off when controlling remotely. ►► To reduce the power consumption of the TV. You can also adjust Energy Saving in PICTURE menu.
17. Equalizer (Command : j v) 19. Programme Add/Skip (Command: m b) ►► To adjust equalize. ►► To set skip status for the current Programme. Transmission [j][v][ ][Set ID][ ][Data][Cr] Transmission [m][b][ ][Set ID][ ][Data][Cr] LSB 0 0 0 0 0 0 0 Data 00 : Skip 0 ENGLISH MSB 01 : Add Ack [b][ ][Set ID][ ][OK/NG][Data][x] Data Frequency 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) 0 0 1 2nd Band 0 0 0 0 1 1(decimal) 0 1 0 3rd Band ... ... ... ... ... ..
22. Input select (Command: x b) (Main Picture Input) * Real data mapping 00 : Step 0 A: Step 10 (Set ID 10) LSB F: Step 15 (Set ID 15) 0 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 110 73 : Step 115 74 : Step 116 CF : Step 199 FE : Step 254 FF : Step 255 ►► To select input source for main picture.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
