Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- LG Digital Signage Setup menu
- Signage Mode Operation
- Power On Status
- Key Operation
- IR Operation / Local Key Operation
- Limited Mode
- Input Source Change
- Menu Display
- OSD Display
- Power On Default (Input Source, A/V Setting, Aspect Ratio)
- Input Source
- A/V Setting
- Aspect Ratio
- Wake On LAN
- DPM
- Digital Audio Input
- Speaker
- Power On Delay
- Pivot Mode
- OSD Portrait Mode (Off, 90, 270)
- Intelligent Auto
- Master/Slave Mode
- Time Sync Clock
- Sync Mode
- DPM Wakeup Control
- Still Image Detecting
- PM Mode
- Factory Reset
- OPS/PC Power Control
- Interface Selection
- Check Screen
- Factory Reset VS Initial Setting
- Signage Mode Operation
- USB Cloning
- Password Change
- Set ID Setup
- Configuration Setup
- Lock Mode
- External Speaker / Audio out
- Fail Over
- ISM Method
- Easy Brightness Control
- SuperSign Server Setup
- Holiday Schedule
- No Signal Image
- Crestron
- Digital Signage Media Player
- LG Digital Signage Setup menu
ENGLISH
21
15 Min Auto Off
• Sets whether to use the 15 Min Auto Off feature.
• It can be set to Enable or Disable.
• Enable: If there is no signal for 15 minutes, the product turns off.
• Disable: 15 Min Auto Off is not used.
• It is recommended that you set this feature to Off if you intend to use the product for long periods of time as the
feature turns the power of the product off.
Automatic Standby
• Sets whether to use the 4 hour/6 hour/8 hour automatic standby feature.
• The option can be set to Off, 4 Hours, 6 Hours, or 8 Hours.
• If you set this feature to a setting other than Off, the product turns off if there is no input from the remote control
for 4 hours, 6 hours, or 8 hours.
• If you set this option to Off, the Automatic Standby feature is disabled.
Screen Saver Cube
• This Screen Saver feature lets you enable/disable the 360-degree-rotating LG Cube which appears on the screen
when there is no signal.