Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- LG Digital Signage Setup menu
- Signage Mode Operation
- Power On Status
- Key Operation
- IR Operation / Local Key Operation
- Limited Mode
- Input Source Change
- Menu Display
- OSD Display
- Power On Default (Input Source, A/V Setting, Aspect Ratio)
- Input Source
- A/V Setting
- Aspect Ratio
- Wake On LAN
- DPM
- Digital Audio Input
- Speaker
- Power On Delay
- Pivot Mode
- OSD Portrait Mode (Off, 90, 270)
- Intelligent Auto
- Master/Slave Mode
- Time Sync Clock
- Sync Mode
- DPM Wakeup Control
- Still Image Detecting
- PM Mode
- Factory Reset
- OPS/PC Power Control
- Interface Selection
- Check Screen
- Factory Reset VS Initial Setting
- Signage Mode Operation
- USB Cloning
- Password Change
- Set ID Setup
- Configuration Setup
- Lock Mode
- External Speaker / Audio out
- Fail Over
- ISM Method
- Easy Brightness Control
- SuperSign Server Setup
- Holiday Schedule
- No Signal Image
- Crestron
- Digital Signage Media Player
- LG Digital Signage Setup menu
ENGLISH
24
Fail Over
• This feature enables automatic switching to another input signal when there is no signal from the current input.
Fail Over
Mode
USB
Priority1
Priority2
Priority3
Priority4
-----
-----
Off
OK
Previous
-----
-----
Off
LG Digital Signage Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
Lock Mode
External Speaker / Audio out
Fail Over
ISM Method
Easy Brightness Control
S/W : xx.xx.xx.xx Micom : x.xx.x
OK
Installation Menu (V 3.0)
Fail Over
You can set Mode to Off, Auto, or Manual.
• Off: Fail Over is disabled.
• Auto: If there is no signal from the current input, the product input switches to a different input that has a video
signal following a specified order (*see table).
• Manual: You can set switching priorities for inputs when there is no signal. If there are a multiple video signals, the
current input switches to the input with the highest priority.
You can set USB to Off, Movie, or Photo.
• Off: Fail Over USB is disabled.
• Movie: If you set this feature to Auto, a movie is played back when there is no input signal. If you set this feature to
Manual, a movie is played back when there is no signal from any of the prioritized inputs.
• Photo: If you set this feature to Auto, a photo slideshow is played back when there is no input signal. If you set this
feature to Manual, a photo slideshow is played back when there is no signal from any of the prioritized inputs.
Fail Over priority when set to Auto
Current
source
1st change 2st change 3st change 4st change 5st change
RGB
HDMI DVI-D OPS USB Auto play RGB NO SIGNAL
DVI-D
HDMI OPS RGB USB Auto play DVI NO SIGNAL
HDMI
DVI-D OPS RGB USB Auto play HDMI NO SIGNAL
OPS
HDMI DVI-D RGB USB Auto play OPS NO SIGNAL