Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- LG Digital Signage Setup menu
- Signage Mode Operation
- Power On Status
- Key Operation
- IR Operation / Local Key Operation
- Limited Mode
- Input Source Change
- Menu Display
- OSD Display
- Power On Default (Input Source, A/V Setting, Aspect Ratio)
- Input Source
- A/V Setting
- Aspect Ratio
- Wake On LAN
- DPM
- Digital Audio Input
- Speaker
- Power On Delay
- Pivot Mode
- OSD Portrait Mode (Off, 90, 270)
- Intelligent Auto
- Master/Slave Mode
- Time Sync Clock
- Sync Mode
- DPM Wakeup Control
- Still Image Detecting
- PM Mode
- Factory Reset
- OPS/PC Power Control
- Interface Selection
- Check Screen
- Factory Reset VS Initial Setting
- Signage Mode Operation
- USB Cloning
- Password Change
- Set ID Setup
- Configuration Setup
- Lock Mode
- External Speaker / Audio out
- Fail Over
- ISM Method
- Easy Brightness Control
- SuperSign Server Setup
- Holiday Schedule
- No Signal Image
- Crestron
- Digital Signage Media Player
- LG Digital Signage Setup menu
ENGLISH
33
No Signal Image
This feature allows the screen image to be changed when there is no signal.
S/W : xx.xx.xx.xx Micom : x.xx.x
OK
Installation Menu (V 3.0)
Configuration Setup
Lock Mode
External Speaker / Audio out
Fail Over
ISM Method
Easy Brightness Control
SuperSign Server Setup
Holiday Schedule
No Signal Image
Crestron
No Signal Image
No Signal Image
No Signal Image
Mode
Slide Time
Original
5 sec
OK
Previous
Disable
• You can use the default image of “No Signal” or a new image by disabling or enabling the No Signal Image feature.
• You can change the image size to Full, Original, or Fit in the Mode option.
• You can set Slide Time if you download multiple images. (5 / 10 / 15 / 20 sec)
How to Download a No Signal Image in Ez Download
1 In order to download an image in Ez Download, there must be an image file in an ‘lg_sig’ or ‘LG_SIG’ folder on your
USB drive.
2 Delete the existing contents stored in internal memory before downloading a new image file.
3 Select the image(s) you want to download. Please make sure that the Total Size in the right-hand corner of the Ez
Download menu does not exceed the Max Size 10240 KB (10 MB).
4 Download the image file for No Signal Image in EZ Download.
NOTE
• Only JPEG files 1 MB or smaller in size can be used as No Signal Image update.
• Progressively encoded JPEG files are not applicable.
• The maximum file resolution for a No Signal Image is Full HD, 1920 x 1080 and HD, 1360 x 768. The minimum file
resolution for a No Signal Image is 64 x 64.
• No Signal Image files with a resolution of Full HD, 1920 x 1080 can cause image sticking.
• Only No Signal Image files with English names are displayed correctly.