Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- LG Digital Signage Setup menu
- Signage Mode Operation
- Power On Status
- Key Operation
- IR Operation / Local Key Operation
- Limited Mode
- Input Source Change
- Menu Display
- OSD Display
- Power On Default (Input Source, A/V Setting, Aspect Ratio)
- Input Source
- A/V Setting
- Aspect Ratio
- Wake On LAN
- DPM
- Digital Audio Input
- Speaker
- Power On Delay
- Pivot Mode
- OSD Portrait Mode (Off, 90, 270)
- Intelligent Auto
- Master/Slave Mode
- Time Sync Clock
- Sync Mode
- DPM Wakeup Control
- Still Image Detecting
- PM Mode
- Factory Reset
- OPS/PC Power Control
- Interface Selection
- Check Screen
- Factory Reset VS Initial Setting
- Signage Mode Operation
- USB Cloning
- Password Change
- Set ID Setup
- Configuration Setup
- Lock Mode
- External Speaker / Audio out
- Fail Over
- ISM Method
- Easy Brightness Control
- SuperSign Server Setup
- Holiday Schedule
- No Signal Image
- Crestron
- Digital Signage Media Player
- LG Digital Signage Setup menu
ENGLISH
34
Crestron
• This function allows synchronization with an application provided by Crestron.
• Server: This menu sets the IP for the network connection with the server (equipment provided by Crestron).
• Port: This menu sets the port for the network connection with the server. The default port number is 41794.
• IP ID: This menu sets a unique ID for synchronizing with the application.
Digital Signage Media Player
Content produced and distributed by SuperSign W can be played.
Supported content types include external input, text, and music, as well as photographs, videos, and Signage Monitors.
Executable content
*.cts: These files can be played at any time.
*.sce: These files can be played at any time like *.cts files or they can be played to a specific schedule.
Using the My Media menu to play files
• After inserting the USB storage device, access the My Media menu and select an executable content file under the
“All Media” tab or the “Contents List” tab to play the file.
Auto-play on USB insertion
• Turning on the main power or inserting a USB device when the main power is on will automatically play executable
content in a specific folder.
• If a USB device has already been inserted when the main power is turned on, executable content in the “normal”
folder is played by default. If the “normal” folder does not exist, executable content in the “AutoPlay” folder is played.
• If a USB device is inserted some time after the main power has been turned on, executable content in the “AutoPlay”
folder is played by default. If the “AutoPlay” folder does not exist, executable content in the “normal” folder is played.
• Autoplay for an inserted USB device is only supported on USB port 1.
Distributing and playing content via SuperSign W
• If a USB storage device is inserted in USB port #1, the LAN cable is connected, and the SuperSign Server settings are
configured, content can be distributed from the SuperSign W server to the player.
• Schedules can be set to play a combination of various content or media in SuperSign W at the time the user wants.
• Messages created by the user can be sent to the player via SuperSign W.
• For more information, see the SuperSign W manual.