Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- LG Digital Signage Setup menu
- Signage Mode Operation
- Power On Status
- Key Operation
- IR Operation / Local Key Operation
- Limited Mode
- Input Source Change
- Menu Display
- OSD Display
- Power On Default (Input Source, A/V Setting, Aspect Ratio)
- Input Source
- A/V Setting
- Aspect Ratio
- Wake On LAN
- DPM
- Digital Audio Input
- Speaker
- Power On Delay
- Pivot Mode
- OSD Portrait Mode (Off, 90, 270)
- Intelligent Auto
- Master/Slave Mode
- Time Sync Clock
- Sync Mode
- DPM Wakeup Control
- Still Image Detecting
- PM Mode
- Factory Reset
- OPS/PC Power Control
- Interface Selection
- Check Screen
- Factory Reset VS Initial Setting
- Signage Mode Operation
- USB Cloning
- Password Change
- Set ID Setup
- Configuration Setup
- Lock Mode
- External Speaker / Audio out
- Fail Over
- ISM Method
- Easy Brightness Control
- SuperSign Server Setup
- Holiday Schedule
- No Signal Image
- Crestron
- Digital Signage Media Player
- LG Digital Signage Setup menu
ENGLISH
20
Viewing the Contents List
You can play the files saved using the Export function to an external file in the SuperSign Software.
1 Press to access the main menu.
2 Press the navigation button to scroll to MY MEDIA and press .
3 Press the navigation button to scroll to Contents List and press .
4 Press the navigation buttons to scroll to a folder you want and press .
5 Press the navigation buttons to scroll to a file you want and press .
- Change Device : Selects the USB storage device. (Depending on model)
- Go to root folder : Returns to the home screen of My Media.
- Go to upper folder : Returns to the previous screen.
- Exit : Exits My Media.
NOTE
• While playing media files from Contents List, only the , , or volume button are available. Selecting the
or button stops playing media files and returns to the Contents List.
• When you use the distribution feature which utilizes SuperSign Software, the storage device used to store contents
is determined based on the size of the remaining memory space. (Note: If USB ports 1 and 2 have the same memory
space, contents will be saved on the storage device connected to USB port 1.(Depending on model))
• If there is the AutoPlay folder in the USB device and its files are in supported formats, they can be played back
automatically when the USB device is connected to the monitor.
• It is recommended that you avoid playing contents using more than two USB ports simultaneously.
• With respect to the playback of distribution or contents schedules through SuperSign Software, the schedule
executed last time is played.