Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- LG Digital Signage Setup menu
- Signage Mode Operation
- Power On Status
- Key Operation
- IR Operation / Local Key Operation
- Limited Mode
- Input Source Change
- Menu Display
- OSD Display
- Power On Default (Input Source, A/V Setting, Aspect Ratio)
- Input Source
- A/V Setting
- Aspect Ratio
- Wake On LAN
- DPM
- Digital Audio Input
- Speaker
- Power On Delay
- Pivot Mode
- OSD Portrait Mode (Off, 90, 270)
- Intelligent Auto
- Master/Slave Mode
- Time Sync Clock
- Sync Mode
- DPM Wakeup Control
- Still Image Detecting
- PM Mode
- Factory Reset
- OPS/PC Power Control
- Interface Selection
- Check Screen
- Factory Reset VS Initial Setting
- Signage Mode Operation
- USB Cloning
- Password Change
- Set ID Setup
- Configuration Setup
- Lock Mode
- External Speaker / Audio out
- Fail Over
- ISM Method
- Easy Brightness Control
- SuperSign Server Setup
- Holiday Schedule
- No Signal Image
- Crestron
- Digital Signage Media Player
- LG Digital Signage Setup menu
ENGLISH
31
Setting Description
Contents Schedule Creates simple schedules and sets playback using files in My Media.
Level
Add Schedule Creates a contents schedule.
- Media: Select the file to which you want to apply the contents schedule.
- Select [Create] to register the contents schedule.
Play Plays a contents schedule.
Delete All Deletes all registered schedules.
NOTE
• Information about registered schedules is stored on your USB storage device. This feature
does not work when your USB storage device has been removed.
• The picture size is 1920 x 1080.
• You can use photo and video files only.
• You can add up to 50 files (photo files + video files = 50).
• Only photos whose resolution is 1920 x 1080 or below are supported.
• The default display time for photos is 1 minute. Playback time for movies differs depending
on the running time.
• You can create up to 7 schedules.
• You cannot register a schedule when no file has been selected.
• Contents schedules that have had information forcibly modified using a PC, etc. may not
function properly.
• With respect to the playback of distribution or contents schedules through SuperSign
Software, the schedule executed last time is played.
Fan Control
(support for only
for some models)
Option
Mode Displays the interior temperature information of the product and controls
the mounted fan.
- Auto: the fan operates according to the default temperature set for the
product.
- On: the fan always operates.
- Customizable: the fan operates according to the user preferences.
Fan Operation
Difference
Shows the difference between the temperatures at which the fan operates
or stops.
Temperature
Setting
Sets the temperature of the operating fan mounted inside the product.
Current
Temperature
Shows the interior temperature of the product.
NOTE
• It is recommended to use the auto setting as the incorrect fan settings may cause the
product to malfunction.
• When the interior temperature of the set exceeds 80 , the set is automatically turned off
for protection.