INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. L15 www.lg.
ENGLISH TABLE OF CONTENTS ACCESSING INSTALLATION MENU. ........................................................4 INSTALLATION MENU...................5 -- LG Digital Signage Setup menu.................................5 Interface Selection Check Screen Factory Reset VS Initial Setting -- USB Cloning......................................................................
Mode Timer Period Time Still Image Detecting and ISM Method Bar Image Bar Color Bar Transparency Bar Direction User Image -- Easy Brightness Control.............................................30 -- SuperSign Server Setup..............................................31 Player Name Server IP Setting Server IP Status -- Holiday Schedule.............................................................32 -- No Signal Image...............................................................33 -- Crestron..............
ENGLISH ACCESSING INSTALLATION MENU 1 Press and hold the SETTINGS button for more than 5 seconds. PICTURE AUDIO TIME OPTION NETWORK MY MEDIA 2 Enter the correct password (default: 0000) and press the OK button. HDMI (DTV) No Signal 3 When the Installation Menu is displayed, select the desired item. Installation Menu (V 3.0) Installation Menu (V 3.
ENGLISH INSTALLATION MENU NOTE •• Default values may differ by region. LG Digital Signage Setup menu •• Use this menu to configure the Digital Signage after in stallation. Installation Menu (V 3.0) LG Digital Signage Setup Installation Menu (V 3.0) LG Digital Signage Setup SuperSign Server Setup USB Cloning Password Change Set ID Setup Configuration Setup Lock Mode External Speaker / Audio out Fail Over ISM Method Easy Brightness Control S/W : xx.xx.xx.xx Micom : x.xx.
Signage Mode Operation ENGLISH •• Enable or disable all Signage Mode Operation functions by setting the feature to Yes or No. •• If you set Signage Mode Operation to Yes, all Signage Mode functions are enabled. •• If you set Signage Mode Operation to No, all Signage Mode functions are disabled, and the product operates with its default settings. (Depending on the model, this feature may not be supported.
Menu Display OSD Display •• Enable or disable OSDs by setting this feature to Yes (displayed) or No (not displayed). •• If you set this feature to No (not displayed), OSDs other than Installation Menu are not displayed. (This feature may not be available with some models.) Power On Default (Input Source, A/V Setting, Aspect Ratio) •• You can configure ‘Input Source’, ‘A/V Setting’, and ‘Aspect Ratio’ after the monitor is turned on. •• You can set this feature to Yes (enabled) or No (disabled).
Wake On LAN ENGLISH •• Set whether to use the ‘Wake On LAN’ feature. •• You can set ‘Wake On LAN’ to On or Off. •• If you set this feature to On, ‘Wake On LAN’ is enabled and you can turn the product on remotely via a LAN. •• If you set this feature to Off, ‘Wake On LAN’ is disabled. (This feature may not be available with some models.) DPM •• Set whether to use ‘Display Power Management (DPM)’. •• You can set this feature to Off, 5 sec, 10 sec, etc.
Intelligent Auto Master/Slave Mode •• This feature allows you to sync monitors connected via RS-232C. •• When various monitors are connected via RS-232C, the forefront monitor becomes the Master. •• Once the Master is selected, the rest become Slaves. •• If you want to change the Master monitor, you must change it in Master/Slave Mode. (This feature may not be available with some models.) NOTE •• The Master/Slave Mode menu is only enabled when Picture ID is set to Off.
Sync Mode ENGLISH •• This feature allows you to sync the start times of contents (videos or images that have been distributed by SuperSign Software) played back on the Master and Slave monitors. •• If you set Sync Mode to Off, the sync feature is disabled. •• A Slave monitor plays contents at the same time as the Master monitor. •• While Sync Mode is performed, RS-232C control of other commands may not work. (This feature may not be available with some models.
Factory Reset All user settings will be reset. Still Continue? Yes No OPS/PC Power Control •• You can control the power of the OPS (media player) by turning the display power on or off. •• Disable: Disables the PC Power Control. •• Sync (on): Synchronizes the power status of the OPS (media player) only when the monitor is turned on. •• Sync (on/off): Synchronizes the power status of the OPS (media player) with the monitor.
LG Digital Signage Setup ENGLISH DPM Off/5sec/10sec/15sec/1min/3min/5min/10min Initial setting / Factory Reset 10min Power On Status LST, STD, PWR LST Key Operation Yes/no No IR Operation Local Key Operation Limited Mode Input Source Change Menu Display OSD Display Normal/Use PWR Only/Block All Normal/Use PWR Only/Block All Yes/No Yes/No Yes/No Yes/No Normal Normal NO Yes Yes Yes Power On Default Yes/No No Input Source Variable Off A/V Setting Yes/No No Aspec Ratio Disable/4:3/16:
The administrator can configure a monitor more quickly via USB and configure multiple monitors simultaneously. All monitors that have been configured this way operate according to the settings of the same master monitor. Using this method reduces installation time compared to the standard RS-232C method. CAUTION •• To use the USB function, make sure to use only USB storage devices formatted as FAT32. USB storage devices formatted as other file systems may not work.
ENGLISH Ez Download [ Software Version ] Current : 02.00.00.01 EPK : 02.00.00.01 [TLL] GlobalClone00001.TLL [TLL] GlobalClone99999.TLL [EPK] M1A_ATSC_KR_RevNo2800_V01...
Send to USB Select file type Ez Download Global TLL Receive from USB Model TLL Select the file name and press OK to start Send to USB Logo Image Download ꔠ Send to Daisy Chain Previous ENGLISH Send To USB USB Cloning GlobalClone00001.TLL OK ꔡ Previous OK 1 Select the desired files using the or buttons and press the OK button. 2 When the download is complete, the screen switches to the initial installation screen.
ENGLISH Logo Image Download This feature allows you to download splash image files onto your monitor. Create a ‘LG_MONITOR’ folder on your USB flash drive and copy a splash image file into the folder. 1 Select the desired image file using the or buttons and press the OK button. USB Cloning Logo Image Download Ez Download Receive from USB Image1.jpg Send to USB Image2.jpg Logo Image Download Image3.jpg Send to Daisy Chain Previous Previous OK OK 2 Wait until the download is complete.
1 Transfer the settings of your current monitor to other linked monitors via RS-232C outputs. 2 The settings of the foremost monitor are copied, while the settings for other monitors in the RS-232C daisy-chain are not. 3 Select Send to DaisyChain, then select Yes to transfer the data or select No to go back to the previous menu. 4 Repeat this until all monitors that are connected to the current monitor’s RS-232C output port turn off.
ENGLISH Password Change You can change your password for security purposes. Enter a new 4-digit number in Change Password. Enter the same number again in Confirm Password to confirm the password. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password PasswordChange Change Set ID Setup Configuration Setup Lock Mode External Speaker / Audio out Fail Over ISM Method Easy Brightness Control S/W : xx.xx.xx.xx Micom : x.xx.
ENGLISH Set ID Setup This feature allows you to set an ID for the product. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password Change SetIDIDSetup Setup Set Configuration Setup Lock Mode External Speaker / Audio out Fail Over ISM Method Easy Brightness Control Set ID Setup Set ID Lock Set ID 1 Auto Set ID Press OK Reset ID Press OK Previous S/W : xx.xx.xx.xx Micom : x.xx.
Reset ID ENGLISH •• This feature initializes the Set ID of the product. •• After execution, the Set IDs of all monitor in the RS-232C daisy chain are reset to 1. (This feature may not be available with some models.) NOTE •• Be sure to execute Auto Set ID/Reset ID when Picture ID is set to Off. Configuration Setup •• This feature enables a detailed configuration of the product. Installation Menu (V 3.
15 Min Auto Off Automatic Standby •• Sets whether to use the 4 hour/6 hour/8 hour automatic standby feature. •• The option can be set to Off, 4 Hours, 6 Hours, or 8 Hours. •• If you set this feature to a setting other than Off, the product turns off if there is no input from the remote control for 4 hours, 6 hours, or 8 hours. •• If you set this option to Off, the Automatic Standby feature is disabled.
ENGLISH Lock Mode •• This feature allows you to select an input that you want to restrict. The selected input is automatically restricted according to your settings. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password Change Lock Mode Set ID Setup Configuration Setup Lock LockMode Mode External Speaker / Audio out Fail Over USB Enable Initial Setting Enable Previous OK ISM Method Easy Brightness Control S/W : xx.xx.xx.xx Micom : x.xx.
•• This feature enables the transfer of analog/digital audio signals from your monitor to external devices. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Password Change Set ID Setup External Speaker / Audio out Configuration Setup Lock Mode Output Control External Speaker / Audio/out External Speaker Audio out Previous Fail Over Off OK ISM Method Easy Brightness Control S/W : xx.xx.xx.xx Micom : x.xx.
ENGLISH Fail Over •• This feature enables automatic switching to another input signal when there is no signal from the current input. Installation Menu (V 3.0) LG Digital Signage Setup USB Cloning Fail Over Password Change Set ID Setup Off Mode Configuration Setup USB Lock Mode External Speaker / Audio out Fail FailOver Over Off Priority1 ----- Priority2 ----- Priority3 ISM Method Priority4 Easy Brightness Control Previous S/W : xx.xx.xx.xx Micom : x.xx.
NOTE ENGLISH •• The number of priorities may vary depending on the model. •• If you set Mode to Off, all of its sub-options are disabled. •• If you set Mode to Auto, the Priority menus are disabled. •• If you set USB to Movie or Photo, the USB Auto Playback option in Configuration Setup is disabled, and the corresponding function is also disabled.
ENGLISH ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Installation Menu (V 3.0) ISM Method LG Digital Signage Setup USB Cloning Password Change Set ID Setup Configuration Setup Lock Mode External Speaker / Audio out Normal Timer Immediately Period 1 hour Time 1 min.
Timer Period •• You can set the period between 1 and 24 hours. •• When there is a button input from your remote control, this function is terminated and the period is calculated again. Time •• You can select from among 1 - 10 mins / 20 mins / 30 mins / 60 mins / 90 mins / 120 mins / 180 mins / 240 mins •• The ISM function is performed for a specified period.
Bar Image ENGLISH •• Off: Displays a bar with a fixed resolution of 300 x 1080, then moves the bar. •• On: Displays a user-downloaded image, and moves the image. NOTE •• Images can be displayed at your desired size without a size limit. (However, the image height is fixed at 1080.) •• If only one image is downloaded, the image is displayed alone and the bar moves. •• If multiple images are downloaded, the images move alternately fading in and out of each other.
User Image How to Download an ISM Photo/Movie in Ez Download. 1 In order to download a user image in Ez Download, there must be a user image file in an ‘ism’ or ‘ISM’ folder on your USB drive. 2 Delete the existing contents stored on internal memory before downloading a new image file. 3 Add [ISMPHO] as a prefix to the name of a file for photos or [ISMMOV] if the file contains movies, to distinguish the file from others (EPK, Logo, No Signal, etc). 4 Download ISM photos or movies in Ez Download.
ENGLISH Easy Brightness Control The backlight is adjusted according to your schedule(s). Easy Brightness Control Installation Menu (V 3.0) Configuration Setup Lock Mode External Speaker / Audio out Fail Over ISM Method EasyBrightness Brightness Control Easy Control SuperSign Server Setup Holiday Schedule No Signal Image Crestron S/W : xx.xx.xx.xx Micom : x.xx.
ENGLISH SuperSign Server Setup •• This feature is used to link with the SuperSign software. Installation Menu (V 3.0) Configuration Setup Lock Mode External Speaker / Audio out SuperSign Server Setup Fail Over ISM Method Easy Brightness Control SuperSign Server SuperSign Server Setup Setup Holiday Schedule No Signal Image Press OK Server IP Setting Press OK Server IP Status Not connected Previous Crestron S/W : xx.xx.xx.xx Micom : x.xx.
ENGLISH Holiday Schedule This feature allows you to specify holidays (unit: day) when the product will not be used. Installation Menu (V 3.
ENGLISH No Signal Image This feature allows the screen image to be changed when there is no signal. Installation Menu (V 3.0) No Signal Image Configuration Setup No Signal Image Disable Lock Mode Mode External Speaker / Audio out Slide Time Original Fail Over ISM Method Previous 5 sec OK Easy Brightness Control SuperSign Server Setup Holiday Schedule NoSignal Signal Image No Image Crestron S/W : xx.xx.xx.xx Micom : x.xx.
ENGLISH Crestron •• This function allows synchronization with an application provided by Crestron. •• Server: This menu sets the IP for the network connection with the server (equipment provided by Crestron). •• Port: This menu sets the port for the network connection with the server. The default port number is 41794. •• IP ID: This menu sets a unique ID for synchronizing with the application. Digital Signage Media Player Content produced and distributed by SuperSign W can be played.
