LG Digital Signage (MONITOR SIGNAGE) 42SH7DB 49SH7DB 55SH7DB AAA *MFL69178803* P/No: MFL69178803 (1507-REV00) Printed in Korea
ENGLISH You can download the owner’s manual for this product at the following websites. (Keyword : SH7DB) РУССКИЙ Руководство пользователя для данного устройства можно скачать на следующих веб-сайтах. (Ключевое слово: SH7DB) ҚАЗАҚША Бұл өнімге арналған пайдаланушы нұсқаулығын төмендегі веб-сайттардан жүктеп алуға болады. (Негізгі сөз: SH7DB) УКРАЇНСЬКА Завантажити посібник користувача для цього виробу можна на веб-сайтах, поданих нижче.
* SuperSign : www.lgecommercial.
1 AUDIO OUT RGB OUT DVI OUT AUDIO OUT Network
AUDIO OUT RGB OUT DVI OUT AUDIO OUT DP OUT Mac HDMI OUT
2 2 1 3 1 2 3 4
4
OWNER’S MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating your set and retain it for future reference. 42SH7DB 49SH7DB 55SH7DB www.lg.
2 ENGLISH TABLE OF CONTENTS 3 SAFETY PRECAUTIONS 3 4 5 5 5 Precautions In Installing the Product Precautions to the AC Adapter and Electrical Power Precautions In Moving the Product Precautions In Using the Product Mounting on a Wall 6 LICENSES 7 ASSEMBLY AND PREPARATION 7 9 9 10 10 11 12 13 Optional Accessories Parts and Buttons Connecting the Stand Connecting the Speakers Connecting IR & Light Sensor Portrait Layout Attaching and Removing the LG Logo Bracket Installing on a Wall 15 REMOTE CON
3 Please read these safety precautions carefully before using the product. WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged. WARNING •• Indoor Use Only. Precautions In Installing the Product WARNING •• Keep away from heat sources like electrical heaters. ►►Electrical shock, fire, malfunction, or deformation may occur.
4 ENGLISH Precautions to the AC Adapter and Electrical Power WARNING •• If water or any foreign substance goes inside the product (TV, monitor, power cord, or AC adapter), disconnect the power cord immediately and contact the service center. ►►Otherwise, this may cause a fire or electric shock due to damage to the product. •• Do not touch the power plug or AC adapter with wet hands. If the pins of the plug are wet or dusty, wipe and dry them before use.
5 WARNING •• Make sure to turn off the product. ►►You may be electrocuted or the product can be damaged. •• Make sure to remove all cables before moving the product. ►►You may be electrocuted or the product can be damaged. •• Make sure the panel faces forward and hold it with both hands to move. If you drop the product, the damaged product can cause electric shock or fire. Contact an authorized the service center for repair.
6 ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com.
7 ENGLISH ASSEMBLY AND PREPARATION CAUTION •• Always use genuine components to ensure safety and product performance. •• The product warranty will not cover damage or injury caused by the use of counterfeit components. NOTE •• The accessories provided with your product may vary depending on the model or region. •• Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.
8 ENGLISH KT-OPSA Screws Power Cord Card (Easy Setup Guide) Connecting Cable OPS kit AN-WF500 Wi-Fi Dongle kit KT-SP0 Pixel sensor kit NOTE •• Cable holder/Cable tie may not be available in some areas or for some models. •• Optional accessories are available for some models. If necessary, please purchase them separately. •• Pixel sensor is sold separately. You can obtain additional accessories from your local retail store.
9 Connecting the Stand - The image may be different according to the model - For certain models only. - The image may be different according to the model 1 Buttons yy yy :Changes the input source. : Accesses the main menus, or saves your yy yy yy :A djust the up and down. : Moves left and right. : Displays the current signal and mode. input and exits the menus. yy /I: Turns the power on or off.
10 ENGLISH Connecting the Speakers - For certain models only. - The image may be different according to the model. 1 NOTE •• Please turn off the power before removing the cable. Connecting or removing the speaker cable while turned on may result in no sound. Connect an input signal cable before installing the speakers. Connecting IR & Light Sensor When you connect the cable to the product, the feature for receiving remote control signals is activated. The IR & light sensor is magnetic.
11 When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen). Using Kensington Lock (This is not available for all models.) The Kensington security system connector is located at the back of the monitor. For more information on installation and use of this system, refer to the manual provided with the Kensington security system or visit http://www.kensington. com. Connect the Kensington security system cable between the monitor and a table.
12 ENGLISH Attaching and Removing the LG Logo Bracket - For certain models only. - The image may be different according to the model. Removing the LG Logo 1 Attaching the LG Logo on the right side Lay a clean cloth on the floor, and then put the monitor on it with the screen face down. Remove the two screws that secure the LG Logo Bracket to the bottom of the rear side of 1 Lay a clean cloth on the floor, and then put the monitor on it with the screen face down.
13 To install your monitor on a wall, attach a wall mounting bracket (optional part) to the back of the monitor. For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. Make sure that the wall mounting bracket is securely fixed to the monitor and to the wall. 1 Use only screws and wall mounting brackets that conform to VESA standards.
14 ENGLISH Securing the monitor to a wall (optional) 1 (Procedure may differ depending on the model.) Insert and tighten the eyebolts, or brackets and bolts on the back of the monitor. - If there are already bolts inserted in the eyebolts’ position, remove the other bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the monitor. 3 Connect the eyebolts and wall brackets tightly with a sturdy cord.
15 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully to use the monitor correctly. To install batteries, open the battery cover, place batteries (1.5 V AAA) matching labels inside the compartment, and close the battery cover. and terminals to the To remove the batteries, perform the installation actions in reverse. The illustrations may differ from the actual accessories.
16 ENGLISH PSM Selects the Picture Mode. INFO Views the information of the currently program and the screen. W.BAL Enters the White Balance menu. SETTINGS A ccesses the main menus or saves your input and exit menus. S.MENU S uperSign menu key (Depending upon the model, this feature may not be supported.) Navigation Buttons Scrolls through menus or options. OK Selects menus or options and confirms your input. BACK A llows you to move back one step in the user interaction function.
17 Display which devices are connected to which external input ports. 1 Access the Input list screen and press the red (input label) button on the remote control. 2 You can assign an input label for every input except USB. NOTE •• External inputs supported : HDMI, DVI-D, DISPLAYPORT, OPS, RGB •• Labels available : PC, DTV •• The input labels are displayed on the Input Label screen or at the top left of the screen when you change the external input setting.
18 ENGLISH MAKING CONNECTIONS You can connect various external devices to your monitor. Change the input mode and select the external device you want to connect. For more information about external device connections, see the user manual provided with each device. Connecting to a PC Some of the cables are not provided. This monitor supports the Plug & Play* feature.
19 •• For the best image quality, using the monitor with HDMI connection is recommended. •• To comply with the standard specifications of the product, use a shielded interface cable with a ferrite core, such as a DVI cable. •• If you turn the monitor on when the set is cold, the screen may flicker. This is normal. •• Sometimes red, green, or blue spots may appear on the screen. This is normal. •• Use a High Speed HDMI®/TM cable. •• Use a certified cable with the HDMI logo attached.
20 ENGLISH Daisy Chain Monitors To use different products connected to each other, connect one end of the signal input cable (DP Cable) to the DP Out connector of Monitor 1 and connect the other end to the DP In connector of the other product. * DP Cable - Use a DP cable that is certified to DP1.1a (SST) or higher.
21 ENGLISH TROUBLESHOOTING No image is displayed Problem Action Is the product power cord connected? yy Check if the power cord is correctly plugged into the power outlet. yy The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution: 1920 x 1080 (60 Hz) yy The signal cable between PC and product is not connected. Check the signal cable.
22 ENGLISH The audio function does not work. Problem No sound? Sound is too dull. Sound is too low. Action yy See if the audio cable is connected properly. yy Adjust the volume. yy See if the sound is set properly. yy Select the appropriate equalizer sound. yy Adjust the volume. Screen color is abnormal. Problem Action Screen has poor color resolution (16 colors). yy Set the number of colors to more than 24 bits (true color).
23 •• Image sticking does not occur when using constantly changing images but may occur when using a fixed image for an extended period of time. Therefore, it is recommended that you use the instructions below to decrease the likelihood of image sticking occurring when using a fixed image. It is recommended that you change the screen at least once every 12 hours at the very minimum; if done more frequently, the prevention of image sticking is more effective.
24 ENGLISH PRODUCT SPECIFICATIONS The product specifications below may be changed without prior notice due to upgrade of product functions. “ ” refers to alternating current (AC), and “ ” refers to direct current (DC). LCD screen Screen type Thin Film Transistor (TFT) Video signal Maximum resolution Liquid Crystal Display (LCD) Screen 1920 x 1080 @ 60 Hz Recommended resolution Horizontal frequency - This may not be supported on some OS or graphic card types.
25 LCD screen Pixel pitch 0.4833 mm (H) x 0.4833 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 1.2 A Power consumption On Mode: 110 W (Typ.) Sleep Mode (DISPLAYPORT): ≤ 0.7 W Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W Head Head + Stand Head + Speaker Head + Speaker + Stand Off Mode: ≤ 0.5W 948.7 mm x 555.3 mm x 31.7 mm / 12.5 kg 948.7 mm x 617.7 mm x 298.3 mm / 13.9 kg 948.7 mm x 555.3 mm x 81.3 mm / 13.3 kg 948.7 mm x 617.7 mm x 298.3 mm / 14.7 kg LCD screen Pixel pitch 0.55926 mm (H) x 0.
26 ENGLISH 55SH7DB LCD screen Pixel pitch 0.630 mm (H) x 0.630 mm (V) Power Rated power AC 100-240 V~ 50/60 Hz 1.7 A Power consumption On Mode: 140 W (Typ.) Sleep Mode (DISPLAYPORT): ≤ 0.7 W Sleep Mode (HDMI,DVI-D,RGB): ≤ 1.0 W Dimensions (Width x Height x Depth) / Weight Head Head + Stand Head + Speaker Head + Speaker + Stand Off Mode: ≤ 0.5W 1230.4 mm x 713.7 mm x 31.7 mm / 20.7 kg 1230.4 mm x 776.1 mm x 298.3 mm / 22.1 kg 1230.4 mm x 713.7 mm x 81.3 mm / 21.5 kg 1230.4 mm x 776.1 mm x 298.
27 Resolution Horizontal Vertical frequency (kHz) frequency (Hz) 720 x 400 31.468 70.8 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1280 x 960 60 60 1152 x 864 57.717 59.934 1280 x 1024 63.981 60.02 1920 x 1080 67.5 60 Resolution Horizontal Vertical frequency frequency (kHz) (Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1366 x 768 47.7 60 1280 x 1024 63.981 60.
Make sure to read the Safety Precautions before using the product. The model and serial numbers of the SET are located on the back and one side of the SET. Record it below should you ever need service. WARNING -This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. MODEL SERIAL Temporary noise is normal when powering ON or OFF this device.
USER GUIDE LG Digital Signage (MONITOR SIGNAGE) L15 Please read this manual carefully before operating your set and retain it for future reference. www.lg.
2 ENGLISH TABLE OF CONTENTS 3 USING THE MONITOR 3 3 Using the Input List Adjusting Aspect Ratio 5 ENTERTAINMENT 5 5 7 7 7 9 11 14 16 18 Using the Network - Connecting to a Network - Network Status Using the My Media - Connecting USB storage devices - Browsing Files - Viewing Movies - Viewing Photos - Listening to Music - Viewing the Contents List 19 CUSTOMIZING SETTINGS 19 20 23 24 25 28 Accessing Main Menus - PICTURE Settings - AUDIO Settings - TIME Settings - OPTION Settings - NETWORK Setting
3 ENGLISH USING THE MONITOR Using the Input List 1 Press INPUT to access the Input List. 2 Press the navigation buttons to scroll to one of the input mode and press OK. yy yy yy yy yy yy RGB-PC HDMI DVI-D USB Display Port OPS Adjusting Aspect Ratio Resize the image to view the image at its optimal size by pressing ARC while you are watching monitor set.
4 ENGLISH yy 16:9 : T his selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). yy Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge. yy Set By Program : Depending on the input signal, screen aspect ratio changes to 4:3 or 16:9.
5 Using the Network To set up the network settings: (Even if your display has already connected automatically, running setup again will not harm anything), Connecting to a wired network Connecting to a Network For wired network connections, connect the display to a local area network (LAN) via the LAN port as shown on the following diagram. Then, set up the network settings. For wireless network connections, connect the Wi-Fi USB module to the USB port. Then, set up the network settings.
6 Connecting to a wireless network ENGLISH 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. 3 Press the navigation buttons to select Network Setting and press OK. 4 Select Setting from the AP list or Simple setting (WPS-button mode). -Setting from the AP list Select an AP to connect to a wireless network. - Simple setting (WPS-button mode) Press the button on the wireless router that supports PBC to easily connect to the router.
7 yy Wireless networks can be subject to interference from other devices operating at a frequency of 2.4 GHz (wireless phones, Bluetooth devices, or microwave ovens). There may also be interference from devices with a frequency of 5 GHz, same as other Wi-Fi devices. yy The surrounding wireless environment can cause the wireless network service to run slowly.
8 ENGLISH Tips for using USB storage devices yy Only a USB storage device is recognizable. yy If the USB storage device is connected through a USB hub, the device is not recognizable. yy A USB storage device using an automatic recognition program may not be recognized. yy A USB storage device which uses its own driver will not be recognized. yy The recognition speed of a USB storage device may depend on each device.
9 ENGLISH Browsing Files Browse files saved in a USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the search button to scroll to MY MEDIA and press OK. 3 Press the Search button to go to the Movie List, Photo List, Music List, or Content List that you want, and press OK. Supported file format Type Supported file format Movie Video Codec Media Container Profile MPEG1 / MPEG2 DAT, MPG, MPEG, TS, TP 1080P @ 30 fps MPEG4 AVI, DIVX, MP4, MKV, TS, 1080P @ 30 fps (DivX 3.
10 ENGLISH Type Photo Supported file format JPEG Baseline : 64 x 64 to 15360 x 8640 Progressive : 1920 x 1440 PNG Interlace : 1200 x 800 BMP 9600 x 6400 yy Non-supported files are displayed in the form of predefined icon. Music MP3 Bit rate : 8 kbps to 320 kbps yy Sampling rate MPEG1/2 Layer3 : 16 kHz to 48 kHz Content File Extensions : *.cts/ *.cse (when using Movie SuperSign File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.trp/*.tp/*.mp4/*.mkv/*.avi/*. avi(motion JPEG)/*.
11 ENGLISH Viewing Movies Plays movie files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Movie List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy 6 Change Device : Selects the USB storage device.
12 Tips for using playing video files ENGLISH yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy yy Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the supported languages are not available. The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed.
13 Select Set Video Play to access the following menus: Sync Position Size Repeat Description Selects your desired picture format during movie play. Changes the Language Group of the audio during movie play. Files with a single audio track cannot be selected. Turn on/off the subtitle. Activated for SMI subtitle and can select the language within the subtitle. Can select the font for subtitle. When set to default, same font as general menu will be used.
14 ENGLISH Viewing Photos View image files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Photo List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy 6 Change Device : Selects the USB storage device.
15 Photo options Press SETTINGS to show the Option menus. 2 Press the navigation buttons to scroll to Set Photo View, Set Video, or Set Audio, and press OK. NOTE yy The option values changed in Movie List do not affect Photo List or Music List. Therefore, they are not affected by option values changed in Photo List or Music List. yy The option values changed in Photo List and Music List do affect each other.
16 ENGLISH Listening to Music Plays music files saved in the USB storage device. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Music List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy yy 6 Change Device : Selects the USB storage device.
17 yy This unit cannot support the ID3 Tag embedded MP3 files. NOTE yy A damaged or corrupted music file does not play but displays 00:00 in playtime. yy A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. yy If you press OK, buttons, screen saver is stopped. yy The , , , , buttons on the remote control are also available in this mode.
18 ENGLISH Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager. 1 Press SETTINGS to access the main menu. 2 Press the navigation button to scroll to MY MEDIA and press OK. 3 Press the navigation button to scroll to Contents List and press OK. 4 Press the navigation buttons to scroll to a folder you want and press OK. 5 Press the navigation buttons to scroll to a file you want and press OK. yy yy yy yy Change Device : Selects the USB storage device.
19 Accessing Main Menus 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to one of the following menus and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. yy yy yy yy yy yy PICTURE : Adjusts the image size, quality, or effect. AUDIO : Adjusts the sound quality, effect, or volume level.
20 ENGLISH PICTURE Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to PICTURE and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK.
21 Screen (In RGB Mode Only) Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Adjusts the options when the picture is not clear, especially when characters are shaky, after the auto configuration. Restores the options to the default setting.
22 Advanced Control - Picture Mode (Standard/ APS/ Sport/ Game/ Calibration) ENGLISH Setting Description Dynamic Contrast Adjusts the contrast to the optimal level according to the brightness of the image. Dynamic Color Adjusts color for more natural-looking colors. Color Gamut Selects the range of colours that can be expressed. Skin Color Sky Color Skin color spectrum can be separately set to implement the skin color as defined by the user. Sky color is set separately.
23 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to AUDIO and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available audio options are described in the following: Setting Sound Mode Sound Effect AV Sync.
24 ENGLISH TIME Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to TIME and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following: Setting Clock Description Sets the time feature.
25 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to OPTION and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Language Selects a language for the display text. Country Select your country.
26 ENGLISH SETTINGS Contents Schedule Description Creates simple schedules and sets playback using files in My Media. Level Add Schedule Creates a contents schedule. - Media: Select the file to which you want to apply the contents schedule. - Select [Create] to register the contents schedule. Play Plays a contents schedule. Delete All Deletes all registered schedules. NOTE yy Information about registered schedules is stored on your USB storage device.
27 ENGLISH Tile Mode This monitor can be tiled with additional monitors to create a large tiled display.
28 ENGLISH NETWORK Settings 1 Press SETTINGS to access the main menus. 2 Press the navigation buttons to scroll to NETWORK and press OK. 3 Press the navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Network Setting Description Configure the network settings.
29 ENGLISH IR CODES yy All models do not support the HDMI/USB function. yy Some key codes are not supported depending on the model.
30 ENGLISH Code (Hexa) Function Note 8F R/C BUTTON 8E R/C BUTTON 72 Red Key (PICTURE ID ON) R/C BUTTON 71 Green Key (PICTURE ID OFF) R/C BUTTON 63 Yellow Key R/C BUTTON 61 Blue Key R/C BUTTON
31 yy Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. yy In the Option menu, Set ID must be between 1 and 255 (or from 1 to 1,000) without being duplicated. Connecting the Cable Connect the RS-232C cable as shown in the picture. yy The RS-232C protocol is used for communication between the PC and product. You can turn the product on or off, select an input source or adjust the OSD menu from your PC.
32 ENGLISH Communication Parameter RS-232C Configurations 4P Cable 4-Wire Configurations (Standard RS-232C cable) Set Set TXD RXD GND IR RXD TXD GND IR NOTE •• When using three-wire connections (nonstandard), an IR daisy chain cannot be used. •• If you want to control multiple units simultaneously, use 3.5 mm 4-pole cables (sold separately).
33 COMMAND 1 DATA (Hexadecimal) 2 01 Power k a 00 to 01 02 Select input x b See [Select input] 03 Aspect ratio k c See [Aspect ratio] 04 Energy saving j q See [Energy saving] 05 Picture mode d x See [Picture mode] 06 Contrast k g 00 to 64 07 Brightness k h 00 to 64 08 Sharpness k k 00 to 32 09 Color k i 00 to 64 10 Tint k j 00 to 64 11 Color temperature x u 00 to 64 12 H position f q 00 to 64 13 V position f r 00 to 64 14 H size f s 00
34 ENGLISH COMMAND 1 DATA (Hexadecimal) 2 35 Software version f z FF 36 White balance red gain j m 00 to FE 37 White balance green gain j n 00 to FE 38 White balance blue gain j o 00 to FE 39 Backlight m g 00 to 64 40 Screen off k d 00 to 01 41 Tile Mode d d See [Tile Mode] 42 Tile Mode Check d z FF 43 Tile ID d i Refer to ‘Tile ID'.
35 Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1] Identifies the factory setting and the user setting modes. * [Command2] Controls monitors. * [Set ID] Used for selecting a set you want to control. A Set ID can be assigned to each set from 1 to 255 (from 01H to FFH), or from 1 to 1,000 (from 001H to 3e8H) in certain models, under OPTION in the OSD menu. Selecting '00H' or '000H' for Set ID allows the simultaneous control of all connected monitors.
36 ENGLISH 01. Power (Command: k a) Controls the power on/off of the set. 04. Energy saving (Command: j q) Sets the energy saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On [j][q][ ][Set ID][ ][Data][Cr] Data Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor is fully powered on, the acknowledgement signal is returned properly. * There may be a delay between the transmission and acknowledgement signals. 02.
37 10. Tint (Command: k j) Adjusts the screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 [k][j][ ][Set ID][ ][Data][Cr] Data Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) Adjusts the screen sharpness. 11. Color temperature (Command: x u) Adjusts the screen color temperature.
38 ENGLISH 13. V position (Command: f r) Adjusts the vertical position of the screen. This function is only available when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available in RGB-PC input mode) Transmission 16. Balance (Command: k t) Adjusts the sound balance.
39 22. Off time schedule (Command: f c) Enables/disables the on time schedule. Transmission Transmission [k][f ][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 [f ][c][ ][Set ID][ ][Data][Cr] Data Acknowledgement Acknowledgement [f ][ ][Set ID][ ][OK/NG][Data][x] 20. Clock 1 (year/month/day) (Command: f a) Adjusts the Clock 1 (year/month/day) value. [c][ ][Set ID][ ][OK/NG][Data][x] 23. On time schedule (Command: f b) Enables/disables the on time schedule.
40 ENGLISH 24. Off timer (repeat mode/time) (Command: f e) Configures the off time (repeat mode/time) settings. Transmission [f ][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. F1 to F7 (reading data) F1: Read the 1st off timer data F2: Read the 2nd off timer data F3: Read the 3rd off timer data F4: Read the 4th off timer data F5: Read the 5th off timer data F6: Read the 6th off timer data F7: Read the 7th off timer data 2.
41 28. Auto off (Command: f g) Configures the automatic off settings. Transmission Transmission [f ][u][ ][Set ID][ ][Data1][Cr] [f ][u][ ][Set ID][ ][Data1][Data2][Cr] [f ][g][ ][Set ID][ ][Data][Cr] Data Data (adding schedule) 60: RGB 70: DVI-D 90: HDMI (HDMI1) 91: OPS (DTV) C0: DISPLAYPORT (DTV) Data1 1.
42 ENGLISH 30. Reset (Command: f k) Resets settings for Picture, Screen and Audio or restores factory settings. (Screen reset can only be performed in RGB input mode.) 33. Time elapsed (Command: d l) Checks the elapsed time.
43 39. Backlight (Command: m g) Adjusts the back light brightness. Transmission Transmission [j][m][ ][Set ID][ ][Data][Cr] Data 00 to FE: Red gain 0 to 254 [m][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Back light brightness 0 to 100 Acknowledgement Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] [g][][set ID][][OK/NG][Data][x] ** This may not be supported on some models. 37. White balance green gain (Command: j n) Adjusts the white balance green gain value. 40.
44 ENGLISH 42. Tile Mode Check (Command: d z) To check Tile Mode status. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode status. ** It may not be supported depending on the model. Acknowledgement [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1 Data2 Data3 00: Tile Mode Off 01: Tile Mode On 00 to 0F: Tile Row 00 to 0F: Tile Column 43. Tile ID (Command: d i) To set Tile ID.
45 Transmission [d][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] ENGLISH 48. Natural Mode (In Tile Mode) (Command : d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted.
