INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. 43/49/55/65UU3***-U* www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
Table of contents ENGLISH 2 3 Location and Function of Controls 23 IR Codes 3 3 Parts and Button Basic functions 24 External control device Setup 4 First Use Wizard 4 Language & Location 5 Installation Menu 5 6 6 6 7 7 8 9 9 9 9 9 10 10 10 10 10 11 11 13 13 13 14 15 15 15 15 16 17 22 Introduction PUBLIC DISPLAY SETTINGS - Public Display Settings Operation - Power On Status - Volume - Key Management - Limited Mode - DTV Channel Update - Power On Default - Aux Source Setting - Power Managemen
Location and Function of Controls ENGLISH Parts and Button Basic functions Power On (Press) Power Off1 (Press and Hold) Menu Control (Press2) Menu Selection (Press and Hold3) 1 2 3 All running apps will close. You can access and adjust the menu by pressing the button when TV is on. You can use the function when you access menu control.
First Use Wizard * Image shown may differ from your TV. ENGLISH Language & Location (Depending on model) •• Select the Language and Country. Some countries need to select the Time Zone.
Installation Menu * Image shown may differ from your TV. ENGLISH Introduction The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’. The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators.
PUBLIC DISPLAY SETTINGS ENGLISH button to select the PUBLIC DISPLAY SETTINGS. 1 Use the 2 Use the ‘OK’ button and then button to select Public Display Mode. -- When ‘Public Display Mode’ is set to On (Work), all functions of Public Display Mode apply.
Volume -- Decide to apply volume policy of ‘Start Volume’, ‘Maximum Volume’ and ‘Minimum Volume’ as On(Work) or Off(Do Not Work). -- (0 ≤ Min ≤ Start ≤ Max ≤ 100) ENGLISH Start Volume •• This entry sets the start volume level when is power on. -- The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤ Max) -- The default setting is ‘Off’ (disabled).
Limited Mode -- Configure TV function’s limitation. When selected to ‘On’, following sub-menus will be worked by below. Setup Menu ENGLISH -- Permit to tune and manage Channels as ‘On’(permitted) or ‘Off’(not permitted). Channel Change •• Decide to change channel or not by setting ‘Program Change’ as ‘On’(Change Possible) or ‘Off’(Change Impossible) when present source is TV. -- When ‘Channel Change’ is set to Off (Change Impossible) »» Program Key, Numeral Key, List Key, Q.
DTV Channel Update ENGLISH -- It is a mode to set whether to update dtv Channel automatically or not. -- When DTV Channel Update is set to ‘Auto’, the function to update TV’s Channel map according to dtv Channel’s stream information. -- DTV Channel Update is set to ‘Manual’, the function to keep TV’s Channel map even though dtv Channel’s information is changed. Power On Default ----- Set the channel to display and Volume Level, etc. when turn on power in AC Power On or Stand-by status.
Network ENGLISH MAC Address •• Displays the MAC address (not customizable). Network Setting One-click network connection •• Connects easily to a wired network. •• This menu supports to connect to an available network. To connect to a network through Set Expert •• For use in special circumstances such as in offices (in cases where a static IP is used). When connecting via Wired, Configures the IP settings of the TV set. You can set the IP address, subnet mask, gateway and DNS server.
General ENGLISH Configuration Setup Select RCU •• It is a mode to set whether to use Select RCU or not. When ‘Select RCU’ is set to ‘Enable’, You can adjust ‘Number of RCU’ menu. Number of RCU •• It is a mode to set Number of RCU. •• Number of RCU value range 1~9. (When ‘Select RCU’ is set to ‘Enable’) •• Number of RCU value range 0. (When ‘Select RCU’ is set to ‘Disable’) -- RCU (Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
15Min Auto Off (Depending on model) •• When ‘15Min Auto Off’ is set to ‘Enable’, TV will turn off if there is no signal in 15Min. ENGLISH Auto Sensing •• If ‘Auto Sensing’ is set to ‘On’, the input is automatically switched when the input signal that you set to “ON’ is received. •• If ‘Auto Sensing’ is set to ‘Disable’, the input is not switched when the input signal is received. -- SIMPLINK and Auto Sensing cannot work simultaneously.
External Speaker (Depending on model) •• •• •• •• ENGLISH Volume Control Selects the volume control method of an external speaker. You can select ‘Off’, ‘Int Variable’ Fixed. Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts. Fixed produces a fixed output. The default is Off. Output •• This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps. (0.01/0.03/0.05/0.1/0.2/0.5/1 Watts). •• The Default is 1 Watt.
HCEC Setup (Depending on model) ENGLISH CEC Mode (Depending on model) •• You will have 2 modes to choose [Default], [HCEC]. •• If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. •• If [HCEC] is selected, you can use TVLink-HCEC Protocol.
Clock Setup (Depending on model) •• •• •• •• •• ENGLISH Clock Source You can select ‘Off’, ‘TV’, ‘NTP’, ‘Admin’. NTP : Clock is synchronized using Network Time Protocol. It's only enabled when network cable is connected. Admin : It's automatically set to Admin when clock is updated by commercial protocols like TVLink-HCEC, TVLink-Interactive, or HCAP API. Off : Clock is synchronized using any available clock source. TV : Clock is synchronized using particular TV programme.
Welcome Video (Depending on model) ENGLISH Welcome Video Mode •• You can set to Off, Once or Repeat. Video Download •• You can download video file from USB. •• Video file locate LG_DTV folder. Reset •• Delete Downloaded video file. Operation •• •• •• •• •• 16 The video displays after your TV is turned on and the boot logo appears. If Welcome Video is enabled and a video is downloaded on the TV, the video plays.
TV Manager * Image shown may differ from your TV. ENGLISH You can update files from USB to TV through the TV manager.
Ez Download * Image shown may differ from your TV. ENGLISH •• Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Image, Micom. -- Images and Software Update files should be copied into the folder named LG_DTV on the USB. »» TLL files should be copied to the root folder of the USB. »» If you press ‘EZ Download’ menu, EZ Download is launched. »» If .DZM file exist file will be selected previously download file.
Export Clone File ENGLISH •• “Import Clone File” needs *.TLL file which is generated by “Export Clone File” process. While writing is in process, the user must not turn TV off nor unplug the USB memory card. The following reference images might be slightly different. Import Clone File •• Once the internal TV data and its channel map information are written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card.
Image Download * Image shown may differ from your TV. ENGLISH •• If there are more than two USB Memory Device, It is possible to select the USB. •• The download sequence is Image Download Select Image(s) Download. •• The target files should be located in “LG_DTV” folder. -- Boot Logo Image »» Boot Logo Image can download only one file. »» Boot Logo Image update function supports only JPG, JPEG, BMP format file of less than 8 MB filesize.
Software Update ►► Update TV Software ENGLISH •• This feature updates TV software through the EPK file in USB. •• The target files should be located in “LG_DTV” folder. •• The download sequence is Software Update Update TV Software Select file(EPK) UPDATE.
►► Update Micom Software ENGLISH •• This feature updates Micom software through the txt file in USB. •• The target files should be located in “LG_DTV” folder. •• The download sequence is Software Update Update Micom Software Select file(txt) UPDATE. USB Download Menu USB Cloning •• An Installer can quickly set up and clone multiple TV sets at a property. These cloned TVs will all have the same Master TV Setup: Public Display Mode Installation Menu settings, User A/V settings and the Channel Map.
IR Codes •• This feature is not available for all models.
Phone jack Type USB IN External control device Setup (PC) on model) (Depending •• You need to purchase the phone-jack to RS-232C cable required for the connection between the PC and the TV, which is specified (TV) (PC) in the manual. * For other models, connect to the USB port. 1 * The connection interface may differ from3 your TV.
RS-232C Configurations IR OUT Using Guide (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 D-Sub 9 TV 3 2 5 6 4 8 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS 3-Wire Configurations (Not standard) RXD TXD GND DTR DSR RTS CTS PC 2 3 5 4 6 7 8 D-Sub 9 TV 3 2 5 6 4 8 7 D-Sub 9 Communication Parameters •• •• •• •• •• •• Baud rate: 9,600 bps (UART) Data length: 8 bits Parity : None Stop bit: 1 bit Communication code: ASCII code Use a crossed (reverse) cable.
Command Reference List Transmission / Receiving Protocol (Depending on model) (Depending on Model) k k k k a c d e DATA (Hexadecimal) 00 to 01 (page 27) (page 27) 00 to 01 k f 00 to 64 k k k k k k g h i j k l 00 to 64 00 to 64 00 to 64 00 to 64 00 to 32 00 to 01 ENGLISH COMMAND1 COMMAND2 01. 02. 03. 04. 05. 06. 07. 08. 09. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24.
1 Power (Command: k a) 4 Volume Mute (Command: k e) ►To ► control power on or off of the set. ►To ► control volume mute on/off. You can also adjust mute using the mute button on remote control. Data 00 : Off Data 01 : On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►To ► show TV is power on or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.
9 Tint (Command: k j) ►To ► adjust the screen tint. You can also adjust colour in the picture settings. 13 Treble (Command: k r) (Depending upon model) ►To ► adjust treble. You can also adjust Treble in the audio settings.
17 Equalizer (Command : j v) Transmission [j][v][ ][Set ID][ ][Data][Cr] MSB ►Select ► channel to following physical number. LSB 0 0 0 0 0 0 0 ENGLISH 19 Tune Command (Command: m a) * This command may work differently Depending upon model and signal. * For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model ►Adjust ► EQ of the set.
•• Tune Command Examples: ENGLISH 01. Tune to the Analog antenna (PAL) Channel 10. Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 02. Tune to the digital antenna (DVB-T) Channel 01. Set ID = All = 00 Data 00 & 01 = Channel Data is 1 = 00 01 Data 02 = Digital Antenna TV = 10 Result = ma 00 00 01 10 03. Tune to the satellite (DVB-S) Channel 1000.
•• Tune Command Examples: Ack [a][ ][Set ID][ ][OK][Data 00][Data 01][Data 02] [Data 03][Data 04][Data 05][x][a][ ][Set ID][ ] [NG][Data 00][x] * For Japan Model ►To ► tune channel to following physical/major/minor number.
ENGLISH 20 Channel Skip/Add (Command: m b) 23 Input select (Command: x b) (Main Picture Input) ►To ► skip current channel for next time. ►To ► select input source for main picture.
