ENGLISH Easy Setup Guide Please read this manual carefully before operating your set and retain it for future reference. ESPAÑOL Guía Rápida de Configuración Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. 12 12 43UU340C www.lg.
ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
49/55/65UU340C 1 2 3 BB B BB AA A B BB B 4-A 49/55UU340C A A 4-B 65UU340C 5 6 B B b a B B B A A A A A
-"/ AUX LAN
1 2 3 4
0 1 2 977 (38.4) 1,110 49UU340C-UB (43.7) 1,247 55UU340C-UB (49.0) 1,468 65UU340C-UB (57.7) 43UU340C-UB 977 (38,4) 1 110 (43,7) 1 247 (49,0) 1 468 (57,7) 629 (24.7) 709 (27.9) 785 (30.9) 917 (36.1) 629 (24,7) 709 (27,9) 785 (30,9) 917 (36,1) 216 (8.5) 231 (9.0) 231 (9.0) 269 (10.5) 216 (8,5) 231 (9,0) 231 (9,0) 269 (10,5) 575 (22.6) 650 (25.5) 729 (28.7) 854 (33.6) 575 (22,6) 650 (25,5) 729 (28,7) 854 (33,6) 80.8 (3.1) 81.1 (3.1) 88.6 (3.4) 89.9 (3.5) 80,8 (3,1) 81,1 (3,1) 88,6 (3,4) 89.
*MFL70423914* (1812-REV01)
OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. 43UU340C 55UU340C 75UU340C 49UU340C 65UU340C 86UU340C *MFL70521912* (2006-REV05) www.lg.com Copyright © 2018 LG Electronics Inc. All Rights Reserved.
Important Safety Instruction ENGLISH •• Read these instructions. •• Keep these instructions. •• Heed all warnings. •• Follow all instructions. •• Do not use this apparatus near water. •• Clean only with dry cloth. •• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. •• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Warning! Safety instructions CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ENGLISH •• Grounding (Except for devices which are not grounded.) -- TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock. •• Never touch this apparatus or antenna during a lightning storm. You may be electrocuted. •• Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.
Optional Extras •• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute. •• Image shown may differ from your TV. •• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. •• The available menus and options may differ from the input source or product model that you are using. •• New features may be added to this TV in the future.
Lifting and Moving the TV ENGLISH When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. •• It is recommended to move the TV in the box or packing material that the TV originally came in. •• Before moving or lifting the TV, disconnect the power cord and all cables. •• When holding the TV, the screen should face away from you to avoid damage. •• Hold the top and bottom of the TV frame firmly.
Mounting on a Table The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http:// www.kensington.com. Connect the Kensington security system cable between the TV and a table. 10 cm (4 inches) 10 cm 10 cm m 10 c (Depending upon model) 2 Connect the power cord to a wall outlet. •• Do not apply foreign substances (oils, lubricants, etc.
Securing TV to the Wall ENGLISH (Depending upon model) 1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.
•• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects. (Depending upon model) Other connections HDMI Stand hole Connections You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device. Antenna/Cable Connect an antenna, cable, or cable box to watch TV while referring to the following.
External Devices ENGLISH Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. •• The external device connections shown may differ slightly from illustrations in a manual. •• Connect external devices to the TV regardless about the order of the TV port. •• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
Using the Button Network setup (Depending upon model) ENGLISH You can simply operate the TV functions, using the button. Wired network connection This TV can be connected to a Pro:Centric server via the LAN port. After making the physical connection, the TV needs to be set up for network communication. Connect the LAN port of the Modem or Router from Pro:Centric server to the LAN port on the TV.
Using Remote Control ENGLISH The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To install batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light.
Troubleshooting The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics. •• Cannot control the TV with the remote control. -- Check if anything such as tape has been placed over the receiver.
Settings ENGLISH To select Picture Mode ( ) Picture Picture Mode Settings Picture Mode Select the picture mode optimized for the viewing environment or the program. •• Vivid Heightens contrast, brightness and sharpness to display vivid images. •• Standard Displays images in standard levels of contrast, brightness and sharpness. •• APS APS (Auto power saving) mode reduces power consumption by dimming control. •• Cinema / Game Displays the optimum picture for a movie or a game.
Specifications Television system Program coverage (Band) External antenna impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity ENGLISH Product specifications may be changed without prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).
HDMI (PC) supported mode Resolution ENGLISH 640 x 350 720 x 400 640 x 480 800 x 600 1024 x 768 1360 x 768 1152 x 864 1280 x 1024 1920 x 1080 3840 x 2160 4096 x 2160 Horizontal Vertical Frequency (kHz) Frequency (Hz) 31.46 70.09 31.46 70.08 31.46 59.94 37.87 60.31 48.36 60.00 47.71 60.01 54.34 60.05 63.98 60.02 67.50 60.00 135.00 120.00 54.00 24.00 56.25 25.00 67.50 30.00 53.95 23.97 54.00 24.
Component port connecting information Supported Photo Formats File Format Y PB PR Video output ports on DVD player Y Y Y Y PB B-Y Cb Pb PR R-Y Cr Pr Component supported mode Horizontal Frequency (kHz) 15.73 720 x 480i 15.75 720 x 576i 15.62 31.47 720 x 480p 31.50 720 x 576p 31.25 44.96 1280 x 720p 45.00 37.50 28.12 1920 x 1080i 33.72 33.75 56.25 67.43 1920 x 1080p 67.50 Resolution Vertical Frequency (Hz) 59.94 60.00 50.00 59.94 60.00 50.00 59.94 60.00 50.00 50.00 59.94 60.00 50 59.94 60.
Supported Video Formats File Format ENGLISH .asf .wmv Codec Video VC-1 Advanced Profile (except for WMVA), VC-1 Simple and Main Profiles Audio WMA Standard (except for WMA v1/ WMA Speech) Video Xvid (except for 3 warp-point GMC), H.264/AVC, Motion Jpeg, MPEG-4 Audio MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital, LPCM, ADPCM, DTS Video H.264/AVC, MPEG-4, HEVC Audio Dolby Digital, Dolby Digital Plus, AAC, MPEG-1 Layer III (MP3), Dolby AC-4 Video H.
KEY CODES * This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP RS-232C Setup •• Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. •• Connect the serial port of the control device to the RS-232C jack on the product back panel. NOTE •• The type of control port on the TV can be different between model series.
Connector type : D-Sub 9-pin male 1 5 ENGLISH 6 9 RS-232C (Serial port) RS-232C configurations 7-Wire Configurations (Standard RS-232C cable) PC 3-Wire Configurations (Not standard) TV PC RXD 2 3 TXD TV RXD 2 3 TXD TXD 3 2 RXD TXD 3 2 RXD GND 5 5 GND GND 5 5 GND DTR 4 6 DTR DTR 4 6 DTR DSR 6 4 DSR DSR 6 4 DSR RTS 7 8 RTS RTS 7 8 RTS CTS 8 7 CTS CTS 8 7 CTS D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID For Set ID number, see “Real data mapping (Hex
Communication Parameters ENGLISH •• Baud rate : 9600 bps (UART) •• Data length : 8 bits •• Parity : None •• Stop bit : 1 bit •• Communication code : ASCII code •• Use a crossed (reverse) cable.
TRANSMISSION / RECEIVING PROTOCOL * (Depending upon Model) ENGLISH Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the set ID to choose desired monitor ID number in option menu. Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
1 Power (Command: k a) 3 Screen Mute (Command: k d) ►►To control power on or off of the set. ►►To select screen mute on/off. Transmission Transmission ENGLISH [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Off Data 01 : On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►►To show TV is power on or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function.
7 Brightness (Command: k h) 11 OSD Select (Command: k l) ►►To adjust screen brightness. You can also adjust brightness in the picture settings. ►►To select OSD (On Screen Display) on/off when controlling remotely. Transmission Transmission Ack [h][ ][Set ID][ ][OK/NG][Data][x] ENGLISH [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 [k][l][ ][Set ID][ ][Data][Cr] Data 00 : Off Data 01 : On Ack [l][ ][Set ID][ ][OK/NG][Data][x] 8 Color (Command: k i) ►►To adjust the screen color.
14 Bass (Command: k s) (Depending upon model) 17 Equalizer (Command : j v) ►►To adjust bass. You can also adjust Bass in the audio settings. Transmission ENGLISH Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 ►►Adjust EQ of the set. [j][v][ ][Set ID][ ][Data][Cr] MSB 0 0 0 0 0 LSB 0 0 0 Ack [s][ ][Set ID][ ][OK/NG][Data][x] Frequency Data 7 6 5 Frequency 4 3 2 1 0 Step 0 0 0 1st Band 0 0 0 0 0 0(decimal) ►►To adjust balance.
►►Select channel to following physical number.
ENGLISH •• Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don’t care) Data 03 & 04: xx (Don’t care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) •• Digital Antenna/Cable Data 00 : xx (Don’t care) [Data 01][Data 02]: Major Channel Number Data 01 : High byte Channel Data Data 02 : Low byte Channel Data - 00 01 ~ 27 0F
•• Tune Command Examples: 1 Tune to the digital antenna (ISDB-T) channel 17-1. Set ID = All = 00 Data 00 = Don’t know Physical = 00 Data 01 & 02 = Major is 17 = 00 11 Data 03 & 04 = Minor/Branch is 1 = 00 01 Data 05 = Digital Antenna TV = 02 Total = ma 00 00 00 11 00 01 02 2 Tune to the BS (ISDB-BS) channel 30.
23 Input select (Command: x b) (Main Picture Input) ►►To select input source for main picture.
IR OUT Using Guide Item Suitable Data Format Not Recommend Data Format Data format code ENGLISH Suitable / Not Recommend remote-controller data format Note NEC, Toshiba Full Repeat Code Format Philips RC5, RC6 Code Format Zenith Code Format Matsushita, RCA Code Format Sony 12/15/20 bit, Mitsubishi Code Format Single : Enable Repeat : Enable Sharp, JVC, R-step, Philips RCMM, RECS-80, XMP Code Format Single : Enable Repeat : Disable Single : Disable Repeat : Disable IR Receiver specifications Carri
Open Source Software Notice Information ENGLISH To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
Regulatory (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ENGLISH RSS-247 Requirement WARNING! (For Canada) [For product having the wireless function using 5 GHz frequency bands] (1) the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (2) for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p.
ENGLISH CHILD SAFETY: PROPER TELEVISION PLACEMENT MATTERS THE CONSUMER TECHNOLOGY INDUSTRY CARES Manufacturers, retailers and the rest of the consumer technology industry are committed to making products safe and enjoyable. As you enjoy your television, please note that all televisions – new and old- must be supported on proper stands or installed according to the manufacturer’s recommendations.
Declaration of Conformity Trade Name LG Responsible Party LG Electronics USA, Inc. Address 111 Sylvan Avenue, North Building, Englewood Cliffs, NJ 07632 E-mail lg.environmental@lge.com The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service. MODEL SERIAL LG Customer Information Center For inquires or comments, visit www.lg.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.
2 KEY CODES ENGLISH ENG KEY CODES • This feature is not available for all models.
EXTERNAL CONTROL DEVICE SETUP 3 • Image shown may differ from your TV. Connect the USB to Serial converter/RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Note: The type of control port on the TV can be different between model series. * Please be advised that not all models support this type of connectivity. * Cable is not provided.
USB USB IN IN 4 EXTERNAL CONTROL DEVICE SETUP (PC) (PC) (TV) (TV) RS-232C IN (CONTROL SERVICE) • You need to purchase the phone-jack to RS-232 cable required for &the connection between the PC and the TV, which is specified in the manual. RS-232C IN (PC) (PC) (CONTROL & SERVICE) * For other models, connect to the USB port. * The connection interface may differ from your TV.
EXTERNAL CONTROL DEVICE SETUP 5 • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None ENGLISH ENG Communication Parameters • Stop bit : 1 bit • Communication code : ASCII code • Use a crossed (reverse) cable. Command reference list (Depending on model) COMMAND1 COMMAND2 DATA (Hexadecimal) 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.7) 03. Screen Mute k d (p.7) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08.
6 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
EXTERNAL CONTROL DEVICE SETUP 7 01. Power (Command: k a) ►► To control Power *On or Off of the set. Transmission[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off 01 : *Power On Ack [a][ ][Set ID][ ][OK/NG][Data][x] ►► To Show TV is Power On or *Off Transmission [k][a][ ][Set ID][ ][FF][Cr] Ack [a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit ‘FF’ data based on this format, Acknowledgement feedback presents status about each function. 02.
8 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ►► To adjust the screen Color(Colour). You can also adjust colour in the PICTURE menu. ►► To adjust treble. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [i][ ][Set ID][ ][OK/NG][Data][x] 09. Tint (Command: k j) ►► To adjust the screen tint. You can also adjust tint in the PICTURE menu.
EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable ►► Adjust EQ of the set.
10 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * Analog Antenna/Cable Data 00 : Physical Channel Number - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) - Cable (CATV) : 01, 0E~7D (Decimal : 1, 14~125) [Data 01 ~ 04]: Major/Minor Channel Number Data 01 & 02: xx (Don't care) Data 03 & 04: xx (Don't care) Data 05: Input Source (Analog) - 00 : Antenna TV (ATV) - 01 : Cable TV (CATV) 2. Tune to the digital antenna (ATSC) channel 30-3.
EXTERNAL CONTROL DEVICE SETUP ►► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] * This feature is varied based on the model. Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] [Data 02][Data 03][Data 04][Data 05] [x][a][ ][Set ID][ ][NG][Data 00][x] 21. Channel(Programme) Add/Del(Skip) (Command: m b) ►► To skip current channel(programme) for next time.
12 EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG * [Data 02], [Data 03] functions depend on model and signal. * If [Data 00] is 00 (3D On), [Data 03] has no meaning. 3) When [Data 00] is 06, 07 00 : Off 01 : On * If [Data 00] is 00 (3D On) or 03 (2D to 3D), [Data 03] works when 3D Mode (Genre) is manual only.