Owner’s Manual

3
ENG
ENGLISH
ACCESSING INSTALLATION MENU
Key Operation

This feature manages the usability of the local/front keys and your remote control with regard to their
operations. This feature works according to the
IR Operation
and
Local Key Operation
settings.
(It may not work depending upon the model.)
IR Operation

Set
LG IR Operation
to On (Work) or Off (Do Not Work) to enable or disable the remote control.
(0 - Normal, 1 - Use PWR Only, 2 - Block All)

Selecting
Block All
sets your monitor to block all key signals coming from general LG remote controls.

Selecting
Use PWR Only
sets your monitor to block all key signals coming from general LG remote
controls except for the Power key signal.

Selecting
Normal
sets your monitor to receive all key signals coming from LG remote controls normally.

There are keys that must be operated in Service mode when
Use PWR Only
or
Block All
is selected.
(In-Start, In-Stop, Power-Only, ADJ, Installation Menu, P-Check, S-check)
(It may not work depending upon the model.)
NOTE

When all IR key signals or all local key signals are blocked, the
Power On Status
value switches to
PWR
. Changing this value has been made impossible to ensure the operation of powering on. (To pre-
vent mistakes by the user)
Limited Mode

This feature enables you to inhibit particular operations of the Signage functions.
This feature works according to the
Input Source Change
,
Menu Display
or
OSD Display
settings.
(It may not work depending upon the model.)
Input Source Change

Decide to change input source or not by setting
Input Source Change
as On(Change possible) or Off
(Change impossible).

When
Input Source Change
is set to Off (Change impossible) INPUT key doesn't work.

When
Input Source Change
is set to On (Change possible), then changing input source is available.
(It may not work depending upon the model.)
Menu Display

Set
On
(Work) or
Off
(Do Not Work).

Even if it is set to
Off,
press the
Menu
button for five seconds or more to go back to the Installation
Menu.
(It may not work depending upon the model.)
OSD Display

Decide to display OSD or not by setting
OSD Display
as
On
(Mark) or
Off
(Off Mark).

When
OSD Display
is set to
Off
(Off Mark), all OSD is not displayed except installaion menu.
(It may not work depending upon the model.)