Owner’s Manual

8
ENG
ENGLISH
ACCESSING INSTALLATION MENU
USB Cloning
The administrator can configure a monitor more quickly through USB and configure multiple monitors
simultaneously. All monitors that have been configured this way operate according to the settings of the
same master monitor.This newer procedure significantly decreases the installation time that would be
necessary if the standard RS-232C method were used instead.

To use the USB Cloning function, be sure to use a USB storage device formatted using the FAT32
file system. If the USB storage device has been formatted with another file system, it may not work
correctly.
CAUTION
Ez Download
Ez Download is a function that enables users to download the desired items all at once, such as EPK
(software update file), TLL (see Send to USB descriptions for more information regarding file types), Splash
Image, Micom, ect.
1
Use the button to select the Ez Download and press the
OK
button.
USB Cloning
Ez Download
Receive from USB
Send to USB
Logo Image Download
No Signal Image Download
Send to Daisy Chain
OK
Previous
S/W : xx.xx.xx.xx Micom : x.xx.x
OK
Installation Menu (V 3.0)
LG Digital Signage Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
Lock Mode
Fail Over
SuperSign Server Setup
Easy Brightness Control
2
Select a list to download and press the Apply button.
- When EPK items are checked, EPK version information is displayed and SPI Boot and LG Boot Log
items are enabled.
-When both EPK and JPG are checked, the LG Boot Log option is disabled. When JPG is un-checked,
the LG Boot Log option is enabled.
-When Global TLL and Model TLL files are both present, only Global TLL file is displayed.
3
Wait for the download to complete. When it is finished, your monitor will be turned off.
NOTE

The user interface for
No Signal Image Download
can be correctly displayed only in English.

The name of the file to download can be correctly displayed only in English.
Ez Download
Previous
Apply
[ Software Version ]
Current : 02.00.00.01
EPK : 02.00.00.01
[ Forced Update Option ]
SPI Boot
LG Boot Logo
[TLL] GlobalClone00001.TLL
[TLL] GlobalClone99999.TLL
[EPK] M1A_ATSC_KR_RevNo2800_V01...
OK