Owner’s Manual

16
ENG
ENGLISH
ACCESSING INSTALLATION MENU
Fail Over
This feature enables an automatic switch to another input with a signal when there is no signal from the cur-
rent input of the product.
Fail Over
Mode
USB
Priority1
Priority2
Priority3
-----
-----
Off
OK
Previous
-----
Off
S/W : xx.xx.xx.xx Micom : x.xx.x
OK
Installation Menu (V 3.0)
LG Digital Signage Setup
USB Cloning
Password Change
Set ID Setup
Configuration Setup
Lock Mode
Fail Over
SuperSign Server Setup
Easy Brightness Control
Mode can be set to Off, Auto or Manual.

Off
The Fail Over function is disabled.

Auto
When there is no video signal in the current input, the input is switched to another input with video
signal according to the set input sequence (refer to the table*).

Manual
When there is no video signal, you can set the priority by which the input is switched. When
there are multiple video signals, the input is switched to the high priority input.
USB can be set to Off, Movie or Photo.

Off
Fail Over USB function is disabled.

Movie
A video is played when every input has no video signal on Auto mode, or when there is no video
signal among the priority inputs on Manual mode.

Photo
The photo slide show runs when every input has no video signal on Auto mode, or when there is
no video signal among the priority inputs on Manual mode.
Fail Over priority when set to Auto
Current source 1st Change 2nd Change 3rd Change 4th Change
RGB
HDMI DVI-D
USB
Auto play
RGB
NO SIGNAL
DVI-D
HDMI RGB
USB
Auto play
DVI
NO SIGNAL
HDMI
DVI-D RGB
USB
Auto play
HDMI
NO SIGNAL