Owner’s Manual
Table Of Contents
9
ENG
ENGLISH
ACCESSING INSTALLATION MENU
Receive from USB
Receive from USB
GlobalClone00001.TLL
GlobalClone99999.TLL
Select file type
Global TLL
Model TLL
OK
Previous
USB Cloning
Ez Download
Receive from USB
Send to USB
Logo Image Download
No Signal Image Download
Send to Daisy Chain
OK
Previous
1
Use the button to select the desired *.TTL files name and press the OK button.
2
The monitor is changed to Standby mode after a successful download.
If the download failed, the monitor will changed to the initial installation screen.
Send to USB
Send To USB
GlobalClone00001.TLL
Select file type
Global TLL
Model TLL
OK
Previous
Select the file name and press OK to start
ꔠ
ꔡ
USB Cloning
Ez Download
Receive from USB
Send to USB
Logo Image Download
No Signal Image Download
Send to Daisy Chain
OK
Previous
1
Use the button to select the desired file name and press the OK button.
2
The monitor is changed to the initial installation screen after a successful download.
NOTE
Model TLL The top-level folder of USB xx (model) xxxxx. TLL (xxxxx is a number) in the form of,
(model) must match the reception is possible.
(ex) The name of Model TLL File is xxLS33A-5DC00001.TLL ~ xxLS33A-5DC99999.TLL for
42LS33A-5DC model.)
Shown to be suitable for the same model, Global TLL and only appears as if the Model TLL.
Global TLL The top-level folder of USB GlobalClonexxxxx.TLL (xxxxx is a number) in the form of,
(model) is when the file does not match the Model TLL, Global TLL to be selected.
(ex) The name of Global TLL File is GlobalClone00001.TLL ~ GlobalClone99999.TLL for 42LS33A-
5DC model.)
(* Global TLL file exists in the same location in order to Cloning Model TLL file must be deleted or
moved to other places.)
When Global TLL and Model TLL files are both present in the top-level folder, press the red button to
display the Global TLL file or the green button to display the Model TLL file.