Owner's Manual
ENGLISH
7
Precautions In Using the
Product
WARNING
• Do not disassemble, repair or modify the product at
your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or
repair.
• When the display is to be left unattended for an
extended period of time, unplug it from the wall
outlet.
• Keep the product away from water.
- Fire or electric shock accident can occur.
• Do not shock or scratch the front and sides of the
screen with metallic objects.
- Otherwise, it may cause damage to the screen.
• Avoid high temperatures and humidity.
CAUTION
• Do not put or store inflammable substances near the
product.
- There is a danger of explosion or fire due to careless
handling of the inflammable substances.
• When cleaning the product, unplug the power
cord and scrub gently with a soft cloth to prevent
scratching. Do not clean with a wet cloth or spray
water or other liquids directly onto the product. An
electric shock may occur. (Do not use chemicals such
as benzene, paint thinners, or alcohol)
• Take a rest from time to time to protect your vision.
• Keep the product clean at all times.
• Do not press strongly upon the panel with a hand or
sharp object such as nail, pencil, or pen, or make a
scratch on it.
• Keep the proper distance from the product.
- Your vision may be impaired if you look at the
product too closely.
• Set the appropriate resolution and clock by referring
to the User’s Guide.
- Your vision can be impaired.
• Use authorized detergent only when cleaning the
product. (Do not use benzene, thinner, or alcohol.)
- Product can be deformed.
• Do not expose to dripping or splashing and do not
place objects filled with liquids, such as vases, cups,
etc. on or over the apparatus (e.g. on shelves above
the unit).
• Batteries should not be exposed to excessive heat.
For example, keep away from direct sunlight, open
fireplace, and electric heaters.
• Do NOT place non-rechargeable batteries in charging
device.
• Spray water onto a soft cloth 2 to 4 times, and use
it to clean the front frame; wipe in one direction only.
Too much moisture may cause staining.
• Do not use products using high voltage around the
Product. (e.g., a bug zapper)
- Monitor may have malfunction as its electrical
shock.
• Install the anker bolt to prevent falling of product.
• Do not lean against the product.
• When humidity is high, water drip pan has full of
water. And the overflow water can flow to the
ground. Before overflow, please remove water.
- Remove lower side of front panel and remove water
on water drip pan with manual water pump.
- Before remove water, Be sure to unplug the power.