Owner’s Manual
Table Of Contents
- OWNER’S MANUAL
- USER GUIDE
- INSTALLATION MANUAL
- ACCESSING INSTALLATION MENU
- INSTALLATION MENU
- Signage Setup
- Power On Status
- Wake On LAN
- LAN Daisy Chain
- Power Off Management
- Rotation
- Beacon
- Baudrate (9600/115200)
- Power On Delay (0 ~ 250)
- Check Screen
- Digital Audio Input
- Speaker
- USB Auto Playback
- Interface Selection
- OPS Power Control
- Multi Display Mode
- Power Indicator
- Sync Mode
- Intelligent Auto
- Studio Mode
- HDMI IT Contents
- White Balance
- Application
- Web Browser
- Status Message
- SIMPLINK Setup
- Local Dimming
- Holiday Schedule
- Easy Brightness Control
- Analog Signage BLU Setting
- Crestron
- Enterprise Settings
- No Signal Image
- Signage 365 Care
- Quiet mode (Fan OFF)
- Factory Reset
- Guide to Using Content Rotation
- USB Cloning
- Password Change
- Fail Over
- ISM Method
- Server
- Lock Mode
- Signage Setup
ENGLISH_index
47
12. [Balance] (Command: k t)
Adjusts the sound balance.
Transmission
(k)(t)( )(Set ID)( )(Data)(Cr)
Data 00~64: Left 50 to right 50
Acknowledgement
(t)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
13. [Sound mode] (Command: d y)
Selects a sound mode.
Transmission
(d)(y)( )(Set ID)( )(Data)(Cr)
Data 01: Standard
02: Music
03: Cinema
04: Sports
05: Game
07: News (Clear Voice III)
Acknowledgement
(y)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
14. [Mute] (Command: k e)
Mutes/unmutes the sound.
Transmission
(k)(e)( )(Set ID)( )(Data)(Cr)
Data 00: Mute
01: Unmute
Acknowledgement
(e)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
15. [Volume Control] (Command: k f)
Adjusts the playback volume.
Transmission
(k)(f)( )(Set ID)( )(Data)(Cr)
Data 00~64: Volume 0 to 100
Acknowledgement
(f)( )(Set ID)( )(OK/NG)(Data)(x)
* It may not be supported depending on the model.
16. [Time] 1 (year/month/day) (Command: f a)
Sets the values of the Time 1 (year/month/day), or sets the Auto time.
Transmission
1. (f)(a)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr)
2. (f)(a)( )(Set ID)( )(0)(0)( )(Data1)( )(Cr)
1. Setting the Time 1 (year/month/day)
Data1 04~1B: year 2014 to 2037
Data2 01~0C: January to December
Data3 01~1F: 1st to 31st
* Enter "fa [Set ID] ff" to view the Time 1 (year/month/day) settings.
2. Setting the Auto time
Data1 00: Auto
01: Manual
* To view the set value of the Auto time, enter “fa [Set ID] 00 ff”.
Acknowledgement
1. (a)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x)
2. (a)( )(Set ID)( )(OK/NG)(0)(0)(Data1)(x)