User's Guide 500E 500G Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference. See the label attached on the back cover and quote this information to your dealer when you require service.
This unit has been engineered and manufactured to ensure your personal safety, improper use may result in potential eletrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this monitor, observe the following basic rules for its installation, use, and servicing. Keep it in an accessible place for future however reference. On Use Safety power cord supplied with the unit.
To Prevent Fire or Hazards: turn the monitor OFF if you leave the room for more than a short Always period of time. Never leave the monitor ON when leaving the house. Keep children from dropping or pushing objects into the monitor's cabinet openings. Some internal parts carry hazardous voltages. Do not add accessories that have not been designed for this monitor. During lightning storm or when the monitor is to be left unattended for an period of time, unplug it from the wall outlet.
Connecting the Monitor Before setting up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices. Carefully set the monitor face-down with the underside facing you. Connecting the Tilt/Swivel stand 1. Align the hooks on the tilt/swivel stand with the matching slots in the base of the monitor. 2. 3. Insert the hooks into slots. Slide the tilt/swivel stand toward the front of the monitor until the latches click into the locked position.
Connecting the Monitor Using the Computer 1. Connect the signal cable. When mated, tighten the thumbscrews to secure the connection. 2. Connect the power cord into a properly power outlet that is easily accessible and close to the monitor. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your monitor may differ from the view as shown. Signal Cable Power Cord Attached Type* Wall-outlet type* Detached Type* * Varies according to model.
Control Panel Functions Front Panel Controls SELECT MENU Control Power Button Power (DPMS) Indicator MENU Button Function Use this button to turn the monitor This Indicator lights on or off. up green when the monitor operates normally. If the monitor is in DPM (Energy Saving) mode, this indicator will flicker. Use this button to enter exit the or on screen display.
On Screen Screen Display (OSD) Control Adjustment Adjustment Making adjustments to the image size, position and operating parameters of the monitor is quick and easy with the On Screen Display Control system. A short example is quick and easy given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD.
On Screen The and Display(OSD) Selection and Adjustment following table indicates all the On Screen Display control, adjustment, setting menus.
On Screen You were Display(OSD) Selection introduced to the and Adjustment procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Icon Sub Description menu To adjust the contrast of the To adjust the To move image To adjust image To move To adjust image height. screen. CONTRAST brightness of the screen. BRIGHTNESS left and right. H POSITION width.
On Screen Display(OSD) Selection Sub Icon an irregular distortion of the displayed an irregular distortion of the displayed an irregular distortion of the displayed image. CORNER* To correct BOTTOM Adjustment Description menu To correct TOP and image. CORNER* To correct * image. H CORNER This item allows you to reduce the degree of moire. (Moire is caused by interference Horizontal Scan Line with the periodical dot screen). It is normally H MOIRE OFF(H:0/V:0).
On Screen Display(OSD) Selection Sub Icon ? CANCEL RESET Adjustment Description menu ?OK and factory default settings except "LANGUAGE": Brightness, Contrast, Tilt, Color 9300, Video Level, OSD Time, Moire (These reset options may differ depending on the mode selected: Preset, User, or New). Return to all If you don't want to reset the monitor, use the button to select CANCEL and then press the SELECT button.
Troubleshooting Check the No following before calling for service. image appears Is the power cord of the monitor connected? Is the power indicator light on? Is the power on and the power indicator green? Is the power indicator ? ? Press the Power button. ? Adjust the brightness and the contrast. ? If the monitor is in power saving mode, try moving the pressing any key on the keyboard to bring up the screen.
Troubleshooting The screen color is not normal. Do you see basic discoloration (16 colors)? ? Is the screen color unstable or monochrome? Do you see black dots on the screen? ? Set the color depth to 256 colors or higher: use 'Control Panel' ->'Display' ->'Settings' ->'Color Palette' Check the connection of the signal cable. Or pull out the video card of the PC and insert it again.
Specifications Picture Tube 15 inches (14.0 inches viewable) 90 degree deflection pitch 0.28mm dot 500E Sync Input : AGAS(Anti-Glare Anti-Static) coating Horizontal 30 Freq. Vertical Video Input Resolution - 54kHz (Automatic) 120Hz (Automatic) Freq. Input Form Signal Input 50 Input Form Separate, RGB Analog, 0.
Preset Modes 1234 (Resolution) VESA 640 x 480 31.47 60 VESA 640 x 480 37.50 75 600 53.68 85 48.
Digitally yours