LED TV 32LX330C 42LX330C 50LX330C 55LX330C a X4 (M4 X L20) 32LX330C b X4 (M4 X L14) 42/50/55LX330C X2 42LX330C www.lg.
i 1 ENGLISH Read Safety and Reference. 粵語 請閱讀安全及參考.
A-1 2 GND LEFT RIGHT GND OPTICAL DIGITAL AUDIO OUT B EXTERNAL SPEAKER OUT GND LEFT RIGHT GND 1 RGB IN (PC) A AUDIO OUT VIDEO L(MONO) AUDIO R ANTENNA/ CABLE IN VIDEO/ Y PR L/MONO AUDIO R PB COMPONENT IN / AV IN VIDEO AUDIO AUDIO IN (RGB) RGB OUT (PC) PR L/MONO AUDIO R PB COMPONENT IN / AV IN AUDIO IN (RGB) VIDEO/ Y PR L/MONO AUDIO R PB COMPONENT IN / AV IN AUDIO IN (RGB) VIDEO/ Y RS-232C IN (CONTROL & SERVICE) AUDIO
H/P OUT A-2 HDMI DVI OUT EXTERNAL SPEAKER OUT AUDIO OUT 1 RS-232C IN (CONTROL & SERVICE) ANTENNA/ CABLE IN VIDEO/ Y PR L/MONO AUDIO R PB COMPONENT IN / AV IN AUDIO IN (RGB) ENNA/ LE IN 2 AUX LAN OPTICAL DIGITAL AUDIO OUT USB IN 1 1 PTC SERVICE (SERVICE ONLY) LAN RJP RS-232C IN (SERVICE) ANTENNA / CABLE IN SPEAKER OUT LINE OUT L R AUDIO IN (R VIDEO L/MONO -AUDIO - R AV IN/AUDIO IN(DVI) AUDIO OUT DVI OUT HDMI USB IN 2 RGB IN (PC) H/P OUT GND LEFT RIGHT GND HDMI DVI OUT IN 3
3 4 1 2 3 4
5
含底座 (毫米) With stand (mm) 尺寸 (寬 x 高 x 深) Dimensions (W x H x D) 不含底座 (毫米) Without stand (mm) 含底座 (千克) With stand (kg) 質量 Weight 不含底座 (千克) Without stand (kg) 電源要求 Power requirement 含底座 (毫米) With stand (mm) 尺寸 (寬 x 高 x 深) Dimensions (W x H x D) 不含底座 (毫米) Without stand (mm) 含底座 (千克) With stand (kg) 質量 Weight 不含底座 (千克) Without stand (kg) 電源要求 Power requirement 32LX330C-CA 42LX330C-CA 732 x 481 x 207 961 x 612 x 218 732 x 437 x 55.5 961 x 567 x 55.5 6.2 9.5 6.0 9.
*MFL68925962*
OWNER’S MANUAL Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.
Safety instructions Please read these safety precautions carefully before using the product.
Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen. You may be injured or the product can be damaged. Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury. Never touch this product or antenna during a thunder or lighting storm. You may be electrocuted. Dispose of used batteries carefully to ensure that a child does not consume them.
If water or another substance enters the product (like an AC adapter, power cord, TV), disconnect the power cord and contact the service centre immediately. Otherwise, this may result in fire or electric shock. CAUTION Install the product where no radio wave occurs. ENGLISH Only use an authorized AC adapter and power cord approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product deformation. Never disassemble the AC adapter or power cord.
Do not turn the product On/Off by plugging-in or unplugging the power plug to the wall outlet. (Do not use the power plug for switch.) It may cause mechanical failure or could give an electric shock. Only use the specified type of battery. This could cause damage to the remote control. Please follow the installation instructions below to prevent the product from overheating. Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make a scratch on it, as it may cause damage to screen. ENGLISH Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. When cleaning the product and its components, unplug the power first and wipe it with a soft cloth. Applying excessive force may cause scratches or discolouration.
Preparing You may find different brightness and color of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.
Maintenance Lifting and moving the TV Cleaning your TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Clean your TV regularly to keep the best performance and to extend the product lifespan. ENGLISH • Make sure to turn the power off and disconnect the power cord and all other cables first.
Using the joystick button Mounting on a table (Image shown may differ from your TV.) (Image shown may differ from your TV.) You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right. 1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper ventilation.
Securing the TV to a wall (This feature is not available for all models.) Separate purchase (Wall Mounting Bracket) Model VESA (A x B) Standard screw Number of screws Wall mount bracket 32LX330C 200 x 200 M6 4 LSW240B MSW240 ENGLISH Model 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. • If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall.
Provided Item Adhesive protective label Provided Item Other Connections ENGLISH • When attaching a wall mounting bracket to the TV, insert the wall mount spacers into the TV wall mount holes to adjust the vertical angle of the TV. (Only when the item of the following form is provided) • Use a signal splitter to use more than 2 TVs. • If the image quality is poor, install a signal amplifier properly to improve the image quality.
A (POWER) Turns the TV on or off. ꕊ Adjusts the brightness of the screen to reduce energy consumption. Selects an AV mode. Changes the input source. Selects Radio, TV, and DTV programme. ENGLISH B Control buttons ( ) Controls the MY MEDIA menus or the SIMPLINK compatible devices (USB, SIMPLINK). Accesses the AV devices connected to the TV. Opens the SIMPLINK menu. Activates your preferred subtitle in digital mode. Licenses Supported licenses may differ by model.
Supported Audio Formats ••File type : mp3 [Bit rate] 32 Kbps - 320 Kbps [Sample freq.] 16 kHz - 48 kHz [Support] MPEG1, MPEG2, Layer2, Layer3 ••File Type : AAC [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] ADIF, ADTS ••File Type : M4A [Bit rate] Free Format [Sample freq.] 8 kHz ~ 48 kHz [Support] MPEG-4 ••File Type : WMA [Bit rate] 128 Kbps ~ 320 Kbps [Sample freq.] 8 kHz ~ 48 kHz [Support] WMA7, WMA8, WMA9 Standard ••File Type : WMA 10 Pro [Bit rate] ~ 768 Kbps [Channel / Sample freq.
Troubleshooting The software may be updated for improvement in performance. The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software. If needed, please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics. Cannot control the TV with the remote control. ENGLISH • Check the remote control sensor on the product and try again.
Specifications Operating Temperature 0 °C to 40 °C Operating Humidity Environment condition Less than 80 % Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % Television System Programme Coverage Analogue TV DTMB PAL D/K/B/G/I, NTSC-M DTMB : 21 ~ 69 PAL D/K : VHF/UHF 1 ~ 69, CATV 1~47 PAL B/G/I : VHF/UHF 1 ~ 69, CATV 1 ~ 47 NTSC M : VHF/UHF 2 ~ 78, CATV 1 ~ 71 Maximum number of storable programmes 420 External Antenna Impedance 75 Ω HDMI-DTV supported mode Resolution Hori
External Control Device Setup Key Codes • This feature is not available for all models.
40 Λ (Arrow Key / Cursor Up) R/C Button BB 41 V (Arrow Key / Cursor Down) R/C Button BD 42 My Apps R/C Button DC 3D R/C Button 43 Menu / Settings, HOME R/C Button 99 AutoConfig R/C Button R/C Button 9F App / * R/C Button R/C Button 9B TV/PC R/C Button TV/RAD R/C Button OK / Enter Q.
USB to Serial converter with USB Cable USB IN USB Type (PC) (TV) ENGLISH • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008)RS-232C USB to IN serial converter which (CONTROL & SERVICE) is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
Customer Computer RS-232C configurations 3-Wire Configurations (Not standard) 1 5 9 RS-232C (Serial port) TV 2 2 TXD TXD 3 1 RXD GND 5 3 GND ENGLISH 6 PC RXD OR RXD 3 2 TXD TXD 2 1 RXD GND 5 3 GND D-Sub 9 Phone Set ID For Set ID number, see Real Data Mapping. 1. Press SETTINGS to access the main menus. 2. Press the navigation buttons to scroll to (*General → About this TV or OPTION) and press OK. 3. Press the navigation buttons to scroll to SET ID and press OK. 4.
Command reference list (Depending upon model) COMMAND1 COMMAND2 DATA (Hexadecimal) ENGLISH 01. Power* k a 00 to 01 02. Aspect Ratio k c (p.22) 03. Screen Mute k d (p.23) k e 00 to 01 k f 00 to 64 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Color/ Colour k i 00 to 64 04. Volume Mute 05. Volume Control 09. Tint k 10. k Sharpness 11. OSD k Select 12. Remote Control Lock k Mode j 00 to 64 k 00 to 32 l 00 to 01 m 00 to 01 13. Treble k r 00 to 64 14.
Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] ENGLISH [Command 1] First command to control the TV. (j, k, m or x) [Command 2] Second command to control the TV. [Set ID] You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. If [Set ID] value is selected to ‘0’, every connected set can be controlled.
ENGLISH 00 : Step 0 01 : Step 1 (Set ID 1) ... 0A : Step 10 (Set ID 10) ... 0F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) ... 32 : Step 50 (Set ID 50) 33 : Step 51 (Set ID 51) ... 63 : Step 99 (Set ID 99) ... C7 : Step 199 C8 : Step 200 ... FE : Step 254 FF : Step 255 ... 01 00 : Step 256 ... 27 0E : Step 9998 27 0F : Step 9999 ... * Commands may work differently Depending upon model and signal. 01. Power (Command: k a) ▶▶ To control Power *On or Off of the set.
t * Full wide mode may work differently based on model and is supported for DTV fully, and ATV, AV partially. 07. Brightness (Command: k h) ▶▶ To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 03. Screen Mute (Command: k d) ▶▶ To select screen mute on/off. Ack [h][ ][Set ID][ ][OK/NG][Data][x] ENGLISH dh * In DTV/HDMI/Component mode (high-definition), Just Scan is available.
12. Remote control lock mode (Command: k m) Data Min : 00 to Max : 64 ▶▶ To lock the front panel controls on the monitor and remote control. Ack [u][ ][Set ID][ ][OK/NG][Data][x] Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off 01 : Lock on Ack [m][ ][Set ID][ ][OK/NG][Data][x] ENGLISH * If you are not using the remote control, use this mode. When main power is off and on (plug-off and plug-in, after 20 - 30 seconds), external control lock is released.
u . Ack [a][ ][Set ID][ ][OK][Data 00][Data 01] * This command may work differently depending upon model and signal. • For Europe, Mid-East, Colombia, Asia except South Korea and Japan Model ▶▶ Select channel to following physical number.
Two bytes are available for each major and minor channel data, but usually the low byte is used alone (high byte is 0). ENGLISH * Tune Command Examples: 1. Tune to the Analog cable (NTSC) channel 35. Set ID = All = 00 Data 00 = Channel Data is 35 = 23 Data 01 & 02 = No Major = 00 00 Data 03 & 04 = No Minor = 00 00 Data 05 = Analog Cable TV = 01 Total = ma 00 23 00 00 00 00 01 2. Tune to the digital antenna (ATSC) channel 30-3.
Control Panel Light (Command: m g) • For Plasma TV ▶▶ To control the panel light. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64 Ack [g][ ][Set ID][ ][OK/NG][Data][x] ▶▶ To select input source for main picture.
26. Extended 3D(Command: x v) (only 3D models) (Depending upon model) ▶▶ To change 3D option for TV. Transmission [x][v][ ][Set ID][ ][Data 00][ ] [Data 01][Cr] ENGLISH [Data 00] 3D option 00 : 3D Picture Correction 01 : 3D Depth (3D Mode is Manual Only) 02 : 3D Viewpoint 06 : 3D Color Correction 07 : 3D Sound Zooming 08 : Normal Image View 09 : 3D Mode (Genre) [Data 01] It has own range for each 3D option determined by [Data 00].
e C)
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
