Owner's Manual

27
CONNECTIONS & SETUP
DIGITAL AUDIO OUTPUT
Connect one end of an optical cable to the
TV Digital Audio Optical Output port.
Connect the other end of the optical cable to
the digital audio optical input on the audio
equipment.
See the external audio equipment instruction
manual for operation.
When connecting with external audio equip-
ments, such as amplifiers or speakers, please
turn the TV speakers off. (Refer to p.66)
HDMI IN
DIGITAL AUDIO
OUT
OPTICAL
1(DVI)
2
RS-232C IN
(CONTROL(CONTROL & SERVICE)
- Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output Optical port.
CAUTION
Do not look into the optical output port. Looking at the laser beam may damage your
vision.
NOTE
!
GG
If the digital set-top box has a DVI output and no HDMI output, a separated audio connection is neces-
sary.
GG
If the digital set-top box supports Auto DVI function, the output resolution of the digital set-top box will
be automatically set to 1280x720p.
GG
If the digital set-top box does not support Auto DVI, you need to set the output resolution appropriate-
ly. To get the best picture quality, adjust the output resolution of the digital set-top box to 1280x720p.
1
2
3
Back panel of the set
1
U0524B_01 11/27/06 8:39 AM Page 27