OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. 42PM4700 50PM4700 50PM6700 60PM6700 P/NO : MFL67468602 (1205-REV03) 50PM9700 60PM9700 www.lg.
LICENSES / OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation.
IMPORTANT SAFETY INSTRUCTIONS 3 IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. yy TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on yy or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified yy by the manufacturer. Use only with a cart, stand, tripod, bracket, yy or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
IMPORTANT SAFETY INSTRUCTIONS Warning - To reduce the risk of fire or yy electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning. Do not expose to dripping or splashing and yy do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
IMPORTANT SAFETY INSTRUCTIONS Ventilation yy Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places. If you smell smoke or other odors coming yy from the TV, unplug the power cord and contact an authorized service center.
IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging (For 3D models) WARNING Viewing Environment Viewing Time yy - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a yy flashing light or particular pattern from 3D contents.
IMPORTANT SAFETY INSTRUCTIONS CAUTION Viewing Environment Viewing Distance yy - Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you feel discomfort in viewing 3D contents, move further away from the TV. Viewing Position (Only for SG Mode) yy - Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may not be able to view 3D contents properly.
TABLE OF CONTENTS 9 TABLE OF CONTENTS 2 LICENSES 2 OPEN SOURCE SOFTWARE NOTICE 3 IMPORTANT SAFETY INSTRUCTIONS 7 Viewing 3D Imaging (For 3D models) 9 TABLE OF CONTENTS 10 REMOTE CONTROL 33 34 34 34 Magic Remote Control Functions - Registering Magic Remote Control - How to use Magic Remote Control - Precautions to Take when Using the Magic Remote Control 35 WATCHING TV 35 Turning the TV on for the first time Installation Procedure 36 Using the User guide 10 ASSEMBLING AND PREPARING 3
ASSEMBLING AND PREPARING Installation Procedure 1 Open the package and make sure all the accessories are included. 2 Attach the stand to the TV set. 3 Connect an external device to the TV set. 4 Make sure the network connection is available. You can use the TV network functions only when the network connection is made. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product.
ASSEMBLING AND PREPARING 11 NOTE yyHow to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable. Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV. [to an External device] [to the TV] 10 mm (+/-5 mm) [Cross Section of Ferrite Core] [Figure 1] 2 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once.
ASSEMBLING AND PREPARING For PM4700, PM6700-UB series ENERGY AV MODE INPUT TV SAVING 1 2 3 4 5 6 7 8 9 LIST 0 FLASHBK MARK FAV VOL 3D CH P A G E MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Owner’s manual Cable holder (See p.19) Stand Screws 3 EA, M5 x 16 (See p.17) Stand Screws 4 EA, M4 x 30 (See p.17) Power Cord holder (See p.19) Protection cover (See p.19) Power Cord Ferrite core (Depending on model) (See p.
ASSEMBLING AND PREPARING 13 For PM9700, PM6700-UD series Owner’s manual Cable holder (See p.19) Stand Screws M5 x 16 The number of screws may differ depending on the model. (See p.18) Stand Screws 4 EA, M4 x 30 (See p.18) Power Cord holder (See p.19) Protection cover (See p.19) Power Cord Ferrite core (Depending on model) (See p.11) Stand Body (See p.18) Stand Base (See p.18) Cable management (See p.18) ENG ENGLISH Magic Remote Control, Batteries (AA) (See p.
ASSEMBLING AND PREPARING Optional Extras Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. AG-S3** 3D Glasses The model name or design may be changed manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING 15 Parts and buttons For PM4700, PM6700-UB series Screen Remote control and intelligent sensors1 Power indicator Speakers INPUT SETTINGS OK Buttons ENG ENGLISH For PM9700, PM6700-UD series Screen Remote control and intelligent sensors1 Power indicator Speakers INPUT SETTINGS OK Buttons Button Description /I Turns the power on or off. INPUT Changes the input source. SETTINGS Accesses the main menus, or saves your input and exits the menus.
ASSEMBLING AND PREPARING Lifting and moving the TV When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. Caution Avoid touching the screen at all times, as yy this may result in damage to the screen. It is recommended to move the TV in the yy box or packing material that the TV originally came in. Before moving or lifting the TV, disconnect yy the power cord and all cables.
ASSEMBLING AND PREPARING 17 Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. For PM4700, PM6700-UB series 1 3 EA M5 x 16 Stand Body Front Stand Base ENG ENGLISH 2 Caution When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
ASSEMBLING AND PREPARING For PM9700/ PM6700-UD series 1 For 60 inches M5 x 16 M5 x 16 5 EA 3 EA Stand Body Front Stand Base 2 Caution When attaching the stand to the TV yy set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. ENGLISH ENG 3 4 EA M4 x 30 Caution 4 Tighten the screws firmly to prevent yy the TV from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING 19 Attaching the protection cover Tidying cables 1 Remove the stand before installing the TV 1 Install the power cord holder and power cord. on a wall mount by performing the stand attachment in reverse. After removing the stand, push the supplied protection cover into the opening at the bottom of the TV until it locks in place. This will protect the opening from accumulating dust and dirt. It will help prevent the power cable from being removed by accident.
ASSEMBLING AND PREPARING Mounting on a table Securing the TV to a wall (optional) (Depending on model) 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (4 inch) (minimum) space from the wall for proper ventilation. 10 cm (4 inches) 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. 1 Insert and tighten the eye-bolts, or TV brackets CAUTION ENGLISH ENG Do not place the TV near or on sources yy of heat, as this may result in fire or other damage.
ASSEMBLING AND PREPARING Mounting on a wall 21 Caution Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. We recommend that you use an LG brand wall mount when mounting the TV to a wall. 10 cm (4 inches) 10 cm Disconnect the power first, and then move yy or install the TV. Otherwise electric shock may occur.
MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the TV and switch input modes to select an external device. For more information on external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS 23 This part of MAKING CONNECTIONS mainly uses picture for PM6700 series. yy Connecting to a HD receiver, DVD, or VCR player Connect a HD receiver, DVD, or VCR player to the TV and select an appropriate input mode. HDMI Connection HDMI is the best way to connect a device. Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown in the following illustration.
MAKING CONNECTIONS DVI to HDMI Connection /DVI IN 2 Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration. To transmit an audio signal, connect an audio cable.
MAKING CONNECTIONS 25 Component Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown in the following illustration. NOTE If cables are installed incorrectly, it could case the image to display in black and white or with yy distorted color. Check to ensure each cable is matched with the corresponding color connection.
MAKING CONNECTIONS Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with the composite cable as shown in the following illustration. NOTE yyIf you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
MAKING CONNECTIONS 27 Connecting to a PC NOTE It is recommended to use the HDMI connection for the best image quality. yy Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use. yy In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or yy brightness.
4 IN 3 MAKINGIN CONNECTIONS 4 3 /DVI IN 2 /DVI IN 2 㶌⸬ (ARC) 㶌⸬ (ARC) Method B: DVI to HDMI Connection (*Not Provided) AUDIO IN (RGB/DVI) AUDIO IN (RGB/DVI) (*Not Provided) $8',2 287 '9, 287 $8',2 287 ENGLISH ENG PC Method C: RGB Connection RGB IN (PC) AUDIO IN RGB IN (PC) (RGB/DVI) AUDIO IN (RGB/DVI) (*Not Provided) (*Not Provided) $8',2 287 5*% 287 3& $8',2 287 5*% 287 3& PC '9, 287
MAKING CONNECTIONS 29 Connecting to an Audio System You may use an optional external audio system instead of the built-in speaker. NOTE If you use an optional external audio device instead of the built-in speaker, set the TV speaker feature yy to off. Digital Optical Audio Connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown in the following illustration. NOTE Do not look into the optical output port.
MAKING CONNECTIONS Connecting to a USB Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. NOTE To store apps on a USB storage device, make sure that it is connected to the USB IN 1 port. yy To use a USB Hub device, make sure that it is connected to the USB IN 1 port. yy (*Not Provided) USB Hub USB IN 1 / USB Apps USB IN 2 Choose any USB input port to connect.
REMOTE CONTROL 31 REMOTE CONTROL For PM4700, PM6700-UB series The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse.
REMOTE CONTROL + VOL Adjusts the volume level. FAV Accesses your favorite channel list. RATIO INPUT 3D TV Used for viewing 3D video. 1 2 3 MUTE Mutes all sounds. 4 5 6 7 8 9 ^ CH v, PAGE CH: Scrolls through the saved channels. RECMoves REC to the previous or next screen. PAGE: REC 0 FLASHBK LIST SETTINGS Accesses the main menu. FAV VOL CH ENGLISH ENG MUTE Q.MENU SETTINGS HOME MY APPS OK HOME REC Accesses the HOME menu. P A G E MY REC APPS Shows the list of Apps. Q.
REMOTE CONTROL 33 Magic Remote Control Functions For PM9700, PM6700-UD series When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse.
REMOTE CONTROL Registering Magic Remote Control The Magic remote Control operates by pairing with your TV. Once you purchased the TV, please register the Magic remote control as follows; How the Magic Remote Control BACK to register HOME To register the remote control, press the Wheel (OK) button on the remote control.
WATCHING TV WATCHING TV Turning the TV on for the first time When you turn the TV on for the first time, the Initial setting screen appears. Select a language and customize the basic settings. 1 Connect the power cord to a power outlet. 2 In Standby mode, press the power button on the remote control to turn the TV on. The Initial setting screen appears if you turn the TV on for the first time. NOTE You can also access Initial Setting by yy accessing OPTION in the main menu.
Using the User guide Using the user guide User Guide allows you to more easily access the detailed TV information. User Guide 1 OPTION > To set language H OME Settings OPTION Language S elects Menu Language and Audio Language displayed on the screen. 1 Press the HOME button to access the HOME CHANNEL Setting menu. PICTURE, SOUND Setting 2 Select User Guide and press the Wheel (OK) OPTION button. Menu Language Selects a screen menu language.
TROUBLESHOOTING / EXTERNAL CONTROL DEVICE SETUP 37 TROUBLESHOOTING General Problem Solution Cannot control the TV with the remote control. yyCheck the remote control sensor on the product and try again. yyCheck if there is any obstacle between the product and the remote control. to ). yyCheck if the batteries are still working and properly installed ( to , No image display and no sound is produced. yyCheck if the product is turned on. yyCheck if the power cord is connected to a wall outlet.
SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions.
SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) Weight 50PM9700 (50PM9700-UA) 39 60PM9700 (60PM9700-UA) With stand 1168.0 mm x 765.0 mm x 297.0 mm 1386.8 mm x 897.0 mm x 346.0 mm (45.9 inch x 30.1 inch x 11.6 inch) (54.5 inch x 35.3 inch x 13.6 inch) Without stand 1168.0 mm x 701.0 mm x 53.4 mm (45.9 inch x 27.5 inch x 2.1 inch) 1386.8 mm x 827.2 mm x 53.4 mm (54.5 inch x 32.5 inch x 2.1 inch) With stand 28.2 kg (62.1 lbs) 40.2 kg (88.6 lbs) Without stand 26.5 kg (58.4 lbs) 36.
SPECIFICATIONS 3D supported mode yyMedia contents and a player need to support HDMI 3D Frame Packing, HDMI 3D Side by Side, HDMI 3D Top & Bottom to play in 3D. yyVideo, which is input as HDMI,USB,DLNA, is switched into the 3D screen automatically. (This funtion does not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen automatically.) yy2D -> 3D mode is available to watch for all signals.
SPECIFICATIONS HDMI/DVI-DTV supported mode Wireless LAN module(TWFM-B003D) specification Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x480 31.469 31.5 59.94 60 1280x720 44.96 45 59.94 60 1920x1080 33.72 33.75 26.97 27 33.716 33.75 67.43 67.5 59.94 60 23.97 24 29.976 30.00 59.
MAINTENANCE MAINTENANCE Cleaning Your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. Caution Make sure to turn the power off and yy disconnect the power cord and all other cables first. When the TV is left unattended and unused yy for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE yy The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases. However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
LG Customer Information Center For inquires or comments, visit www.lg.com or call; 1-800-243-0000 1-888-865-3026 1-888-542-2623 USA, Consumer User USA, Commercial User CANADA Register your product Online! www.lg.com The model and serial number of the TV is located on the back and/or one side of the TV. Record it below should you ever need service. MODEL SERIAL (For PM4700 series/50PM6700/50PM9700 USA, Canada, Mexico) This product qualifies for ENERGY STAR in the “factory default (Home Use)” setting.
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating your set and retain it for future reference. www.lg.
2 EXTERNAL CONTROL DEVICE SETUP IR CODES (Depending on model) How to Connect Connect your wired remote control to the Remote Control port on the TV. Remote Control IR Codes Output waveform Single pulse, modulated with 37.
EXTERNAL CONTROL DEVICE SETUP Code (Hexa) Function (POWER) Note Code (Hexa) Function Note Remote control Button (Power On/Off) 0F TV Remote control Button DC 3D Remote control Button 42 Q.
4 EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Type of connector; D-Sub 9-Pin Male 1 Note RS-232C on this TV is intended to be used yy with third party RS-232C control hardware and software.
EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID Set ID number. 7-Wire Configuration (Serial female-female NULL modem cable) PC RXD X OPTION TV 2 3 • Language TXD • Caption : Off • ISM Method : Normal TXD 3 2 RXD GND 5 5 GND DTR 4 6 DSR DSR 6 4 DTR RTS 7 8 CTS 1 Press SETTINGS to access the main menu.
6 EXTERNAL CONTROL DEVICE SETUP Communication Parameters Stop bit: 1 bit yy Communication code: ASCII code yy Use a crossed (reverse) cable. yy Baud rate: 9600 bps (UART) yy Data length: 8 bits yy Parity : None yy Command reference list 01. Power COMMAND1 COMMAND2 DATA (Hexadecimal) k a 00 - 01 COMMAND1 COMMAND2 DATA (Hexadecimal) 14. Balance k t 00 - 64 x t (See p.9) ENGLISH ENG 02. Input Select x b (See p.8) 15. 3D (For 3D TV) 03. Aspect Ratio k c (See p.8) 16.
EXTERNAL CONTROL DEVICE SETUP 7 Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99. When selecting Set ID ‘0’, every connected the set is controlled.
8 EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) To control Power On/Off of the set. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00: Power Off Data 01: Power On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this model, set will send the Acknowledge after power on processing completion.
EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set.
10 EXTERNAL CONTROL DEVICE SETUP 01: Minimum 02: Medium 03: Maximum 04: Intelligent Sensor 05: Screen off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] 20. Auto Configuration (Command: j u) To adjust picture position and minimize image shaking automatically. Auto configuration only works in RGB-PC mode. Transmission [ j ][u][ ][Set ID][ ][Data][Cr] Data 01: To set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 21.
EXTERNAL CONTROL DEVICE SETUP 11 * Table List (Channel Tuning) 7 Main/Sub Picture 6 Two/One Part Channel 5 Using Physical Channel 4 Reserved 3 2 1 0 Step 0 Main 0 Two 0 Use x 0 0 0 0 NTSC Air 1 Sub 1 One 1 No Use x 0 0 0 1 NTSC Cable x 0 0 1 0 ATSC Air x 0 0 1 1 ATSC Cable_std x 0 1 0 0 ATSC Cable_hrc x 0 1 0 1 ATSC Cable_irc x 0 1 1 0 ATSC cable_auto x 0 1 1 1 Reserved x x x x x ...
