OWNER’S MANUAL PLASMA TV Please read this manual carefully before operating your set and retain it for future reference. PN45** PN65** P/NO : MFL67648602 (1212-REV00) www.lg.
TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 3 SAFETy INSTRUCTIONS 34 LICENSES 8 INSTALLATION PROCEdURE 34 OPEN SOURCE SOFTWARE NOTICE 8 ASSEMBLING ANd PREPARING 34 8 12 13 14 15 15 17 18 19 Unpacking Separate purchase Parts and buttons Lifting and moving the TV Setting up the TV - Attaching the stand Mounting on a table Mounting on a wall Tidying cables ExTERNAL CONTROL dEvICE SETUP 20 MAKING CONNECTIONS 20 21 21 22 22 22 23 24 Antenna Connection HDMI Connection DVI to HDMI connect
SAFETY INSTRUCTIONS ENGLISH ENG SAFETy INSTRUCTIONS Please read these safety precautions carefully before using the product.
SAFETY INSTRUCTIONS ENGLISH ENG yyKeep the packing antimoisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children. yyDo not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.
SAFETY INSTRUCTIONS yyApparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. yyWhen installing the antenna, consult with a qualified service technician. If not installed by a qualified technician. This may create a fire hazard or an electric shock hazard. yyWe recommend that you maintain a distance of at least 2 to 7 times the diagonal screen size when watching TV.
SAFETY INSTRUCTIONS ENGLISH ENG yyPlease follow the installation instructions below to prevent the product from overheating. --The distance between the product and the wall should be more than 10 cm. --Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a cupboard). --Do not install the product on a carpet or cushion. --Make sure the air vent is not blocked by a tablecloth or curtain. Otherwise, this may result in fire.
SAFETY INSTRUCTIONS yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING ENGLISH ENG NOTE yy yy yy yy yy Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. The TV can be placed in standby mode in order to reduce the power consumption.
ASSEMBLING AND PREPARING 9 ENGLISH ENG Power Cord Holder (See p. 19) Power Cord (Depending on model) Screw for assembly 7 EA, M4 x 14 (Only 42PN45**) (See p. 15) or Stand Body / Stand Base (See p. 15) Isolator (Depending on model) (See p. 11) Protection Cover (Only 50PN45**,50PN65**) (See p. 16) Screw for assembly 7 EA, M5 x 16 (Only 50PN45**, 50/60PN65**) (See p.
ASSEMBLING AND PREPARING ENGLISH ENG NOTE yyThe items supplied with your product may vary depending on the model. yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions. How to use the ferrite core 1 Use the ferrite core to reduce the electromagnetic interference in the power cable. Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
ASSEMBLING AND PREPARING 11 NOTE -- Use this to install TV in a place where there is a voltage difference between TV Set and GND of antenna signal. »» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact might be heated and excessive heat might cause an accident. -- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall.
ASSEMBLING AND PREPARING ENGLISH ENG Separate purchase Separate purchase items can be changed or modified for quality improvement without any notification. Contact your dealer to buy these items. These devices only work with certain models. LG Audio Device Compatibility LG Audio Device PN45** PN65** • • The model name or design may be changed depending on the upgrade of product functions, manufacturer’s circumstances or policies.
ASSEMBLING AND PREPARING 13 ENGLISH ENG Parts and buttons Screen LAN AUDI Speakers Buttons Power indicator Button Description Turns the power on or off. Selects the highlighted menu option or confirms an input S Accesses the main menus, or saves your input and exits the menus. Changes the input source H H Adjusts the volume level. Scrolls through the saved programmes.
ASSEMBLING AND PREPARING ENGLISH ENG Lifting and moving the TV Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. yy When transporting a large TV, there should be at least 2 people. yy When transporting the TV by hand, hold the TV as shown in the following illustration. CAUTION yy Avoid touching the screen at all times, as this may result in damage to the screen.
ASSEMBLING AND PREPARING ENGLISH ENG Setting up the TV Image shown may differ from your TV.
ASSEMBLING AND PREPARING To detach the stand ENGLISH ENG (Only 50PN45**, 50PN65**) 1 CAUTION yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. yy Make sure that the screws are inserted correctly and fastened securely. If they are not fastened securely enough, the TV may tilt forward after being installed.
ASSEMBLING AND PREPARING 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 10 cm Adjusting the angle of the TV to suit view (This feature is not available for all models.) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. 20˚ 20˚ m 10 c 10 cm 2 Connect the power cord to a wall outlet.
ASSEMBLING AND PREPARING ENGLISH ENG Securing the TV to a wall (This feature is not available for all models.) 1 2 3 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -- If there are bolts inserted at the eye-bolts position, remove the bolts first. Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV. Connect the eye-bolts and wall brackets tightly with a sturdy rope.
ASSEMBLING AND PREPARING 42/50PN45** 50/60PN65** Model vESA (A x B) Tidying cables 1 400 x 400 Standard screw Install the Power Cord Holder and Power Cord. It will help prevent the power cable from being removed by accident. (Only 42PN45**) M6 A B Power cord holder (Only 50PN45**, 50/60PN65**) Power cord holder 2 Gather and bind the cables with the Cable Holder. CAUTION y Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.
MAKING CONNECTIONS ENGLISH ENG MAKING CONNECTIONS Antenna Connection This section on MAKING CONNECTIONS mainly uses diagrams for the PN45** models. Connect various external devices to the TV and switch input modes to select an external device. For more information of external device’s connection, refer to the manual provided with each device. Available external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
MAKING CONNECTIONS 21 Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. IN 1(PC) Choose any HDMI input port to connect. It does not matter which port you use.
MAKING CONNECTIONS Audio Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with a component cable as shown. You may use an optional external audio system instead of the built-in speaker. Digital optical audio connection Transmits a digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown.
MAKING CONNECTIONS 23 ENGLISH ENG Composite Connection Transmits analog video and audio signals from an external device to the TV. Connect the external device and the TV with th e composite cable as shown.
MAKING CONNECTIONS Connect a USB storage device such as a USB flash memory, external hard drive, or a USB memory card reader to the TV and access the My media menu to use various multimedia files.
REMOTE CONTROL 25 The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. ENGLISH ENG REMOTE CONTROL or CAUTION yy Do not mix old and new batteries, as this may damage the remote control.
REMOTE CONTROL ENGLISH ENG Only PN65** POWER Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. RATIO Resizes an image. INPUT Changes the input source. AV MODE Selects an AV mode. Number buttons Enters numbers. RATIO + Adjusts the volume level. FAV Accesses your favourite programme list. GUIDE Displays the program event according to time scheduler. AV MODE TV/ RAD 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW P A G E GUIDE MUTE SETTINGS INFO Q.MENU EXIT MUTE Mutes all sounds.
USING THE USER GUIdE User Guide allows you to more easily access the detailed TV information. Press SETTINGS to access the main menus. Press the RED button to access the Customer Support menus. Press the Navigation buttons to scroll to User Guide and press OK. 1 2 3 User Guide 1 OPTION > To set language SETTINGS OPTION Language You can select the language of the menu displayed on the screen and the digital sound broadcasting. y Menu Language : Selects a language for the display text.
MAINTENANCE / TROUBLESHOOTING ENGLISH ENG MAINTENANCE Cleaning your TV Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION yy Make sure to turn the power off and disconnect the power cord and all other cables first. yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges.
TROUBLESHOOTING 29 Problem No sound is produced while images are displaying. One of the speakers produce noises or does not produce sound. Solution + or - button. Press yy Check if the sound is muted by pressing MUTE. yy Scroll to other channels. There may a problem with the broadcast. yy Check if the audio cables are connected properly. yy A change in ambient humidity or temperature may result in an unusual yy noise when the product turns on or off. There is no problem with your product.
(19,5210(17$/ ,1)250$7,21 ENGLISH ENG
SPECIFICATIONS ENGLISH ENG SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. MOdELS Dimensions (W x H x D) Weight 42PN4500-TA 50PN4500-TA 983.6 x 650.3 x 250.0 1168.0 x 755.4 x 292.7 Without stand (mm) 983.6 x 595.6 x 57.0 1168.0 x 698.6 x 57.0 With stand (kg) 19.6 25.4 Without stand (kg) 18.4 24.
SPECIFICATIONS ENGLISH ENG New Zealand, Singapore Television System Programme Coverage Australia Television System Programme Coverage Indonesia, Israel, Myanmar, Sri Lanka Television System Programme Coverage Vietnam, Malaysia Television System Programme Coverage Iran, Algeria, Tunisia, Digital model Television System Programme Coverage Analogue model, India, Thailand, South Africa, -- Television System Programme Coverage External Antenna Impedance Digital TV Analogue TV DVB-T PAL/SECAM
SPECIFICATIONS Component port connecting information Horizontal Frequency (kHz) Vertical Frequency (Hz) 720x480 31.469 31.5 59.94 60 720x576 31.25 50 1280x720 37.5 44.96 45 50 59.94 60 33.72 33.75 28.125 26.97 27 33.716 33.75 56.25 67.43 67.5 59.94 60 50 23.97 24 29.976 30.00 50 59.94 60 Resolution 1920x1080 HdMI/dvI-PC supported mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) 640x350 31.468 70.09 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.
LICENSES / OPEN SOURCE SOFTWARE NOTICE / EXTERNAL CONTROL DEVICE SETUP ENGLISH ENG LICENSES Supported licenses may differ by model. For more information about licenses, visit www.lg.com. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
